NF E09-081-3-2007

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3 : test bench method for the measurement of the emission rate of a given pollutant.

BS ISO 11042-1-1997

Gasturbinen. Abgasmessung. Messung und Beurteilung Gas turbines. Exhaust gas emission. Part 1:Measurement and evaluation Turbines. gaz. Emissions de gaz d'echappement. Mesurage et evaluation

实施日期：1997-04-15

ISO 15011-3-2009

焊接及相关工艺中的健康和安全 烟尘和气体取样的实验室方法 第3部分:弧焊时臭氧排放率的测定

Health and safety in welding and allied processes -- Laboratory method for sampling fume and gases -- Part 3: Determination of ozone emission rate during arc welding

适用范围：ISO 15011-3:2009 defines a laboratory method for measuring the emission rate of ozone during arc welding, using a hood technique. The method is directed primarily at measuring ozone emission rate when ...

发布日期：2009-10-01  实施日期：2009-10-01

EN ISO 15011-3-2009

Health and safety in welding and allied processes. Laboratory method for sampling fume and gases. Part 3:Determination of ozone emission rate during arc welding

实施日期：2009-10-01

GB 20891-2007

非道路移动机械用柴油机排气污染物排放限值及测量方法(中国Ⅰ、Ⅱ阶段)

Limits and measurement methods for exhaust pollutants from diesel engines of non-road mobile machinery（Ⅰ、Ⅱ）

适用范围：本标准规定了非道路移动机械用柴油机排气污染物排放限值及测量方法。　　本标准适用于以下(包括但不限于)非道路移动机械装用的额定净功率不超过560kW，在非恒定转速下工作的柴油机。　　——工业钻探设备；　　——工程机械(包括装载...

发布日期：2007-04-03  实施日期：2007-10-01

ISO 4220-1983

环境空气 气态酸性空气污染指数的测定 指示剂指示或终点电位指示滴定法,

Ambient air -- Determination of a gaseous acid air pollution index -- Titrimetric method with indicator or potentiometric end-point detection

适用范围：Is applicable to mass concentrations of sulfur dioxide higher than 30 g/m3. The results obtained following this procedure depend on the amounts of acid and alkaline gaseous air pollutants which are lik...

发布日期：1983-12-01  实施日期：1983-12-01

GB/T 3871.13-2006

农业拖拉机 试验规程 第13部分：排气烟度测量

Agricultural tractors - Test procedures - Part 13: Measurement of exhaust smoke

适用范围：GB/T 3871的本部分规定了农业拖拉机用发动机在稳定转速时的排气烟度的测量方法。　　本部分适用于农业轮式和履带拖拉机。

发布日期：2006-02-08  实施日期：2006-04-01

ISO 15011-4-2006

焊接及相关工艺中的健康和安全 烟尘和气体取样的实验室方法 第4部分:烟尘数据表

Health and safety in welding and allied processes -- Laboratory method for sampling fume and gases -- Part 4: Fume data sheets

适用范围：ISO 15011-4:2006 covers health and safety in welding and allied processes. ISO 15011-4:2006 specifies requirements for determination of the emission rate and chemical composition of welding fume in ord...

发布日期：2006-03-01  实施日期：2006-03-01

JJG 688-1990

汽车排放气体测试仪

Vehicle Exhaust Emissim Measuring ...

实施日期：1990-11-01

BS ISO 6460-1-2007

Motorcycles. Measurement method for gaseous exhaust emissions and fuel consumption. Part 1:General test requirements Motocycles. Méthode de mesure des émissions de gaz d'échappement et de la consommation de carburant. Exigences générales d'essai

实施日期：2007-09-28

ASTM B808-2010

用石英晶体微量天平监测大气腐蚀室的试验方法

Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances

适用范围：<p>Corrosion film growth with thicknesses varying from a monolayer of atoms up to 1 <span class=''unicode''>x03BC;</span>m can readily be measured on a continuous, real-time, in-situ, basis with QCMs...

发布日期：2010-10-01  实施日期：2010-10-01

BS EN ISO 15011-1-2009

焊接和结合工艺的卫生和安全 电弧焊产生烟气取样的实验室方法 第1部分:排放率的测定和颗粒烟雾分析的取样 替代BS 7384:1991

Arbeits-und Gesundheitsschutz beim Schwei?en und bei verwandten Verfahren. Laborverfahren zum Sammeln von Rauch und Gasen. Bestimmung der Rauchemissionsrate beim Lichtbogenschwei?en und Sammeln von Rau...

适用范围：This part of ISO 15011 defines a laboratory method for measuring the emission rate of fume from arc welding.It also defines a method of collecting the fume for subsequent analysis and refers to suitabl...

实施日期：2009-11-30

BS EN 14792-2005

Stationary source emissions. Determination of mass concentration of nitrogen oxides (NOx). Reference method: Chemiluminescence

ISO 15011-4 AMD 1-2008

焊接及相关处理程序中的卫生和安全 烟气取样用试验室方法－第4部分:烟气数据表 修改件1

Health and safety in welding and allied processes. Laboratory method for sampling fume and gases. Part 4:Fume data sheets amendment 1 first edition

实施日期：2008-12-15

EN ISO 15011-2-2009

Health and safety in welding and allied processes. Laboratory method for sampling fume and gases. Part 2:Determination of the emission rates of carbon monoxide (CO),carbon dioxide (CO2),nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc welding,

实施日期：2009-10-01

ISO 15011-1-2009

焊接及相关工艺中的健康和安全 烟尘和气体取样的实验室方法 第1部分:弧焊时烟尘排放率的测定和分析用烟尘的收集

Health and safety in welding and allied processes -- Laboratory method for sampling fume and gases -- Part 1: Determination of fume emission rate during arc welding and collection of fume for analysis

适用范围：ISO 15011-1:2009 defines a laboratory method for measuring the emission rate of fume from arc welding. It also defines a method of collecting the fume for subsequent analysis and refers to suitable ana...

发布日期：2009-10-01  实施日期：2009-10-01

DIN EN 1093-3-2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant

实施日期：2009-02-01

ISO 6855-1983

道路车辆 装有控制点火发动机装置的机动自行车排出气体污染物的测量方法

Road vehicles -- Measurement methods for gaseous pollutants emitted by mopeds equipped with a controlled ignition engine

适用范围：Specifies methods of measurement for gaseous pollutants emitted by mopeds as defined in ISO 3833, equipped with a 4-stroke, a 2-stroke or a rotary controlled ignition engine. Defines a driving cycle in...

发布日期：1983-10-01  实施日期：1983-10-01

DIN EN ISO 15012-1-2005

焊接和相关工艺的健康与安全 空气过滤设备的试验和标识要求 第1部分:焊接烟气分离效果试验

Health and safety in welding and allied processes - Requirements testing and marking of equipment for air filtration - Part 1: Testing of the separation efficiency for welding fume

适用范围：This standard deals with the significant hazards caused by the emission of welding fume particles from welding fume separation equimment operated according to its intended use and under the conditions ...

GB/T 5181-1985

汽车排放物术语和定义

Automotive emissions--Terms and definitions