NF T47-267-2005

Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification.

DIN 49860-2-2000

带有类似天然光的能量光谱分布的金属卤素灯.第2部分:体育照明

Metal halide lamps with spectral energy distribution similar to natural light - Part 2: Sports lighting

适用范围：The document deals with metal halide lamps with spectral energy distribution similar to natural light for sports lighting.

实施日期：2000-01-01

DIN EN 15488-2007

Ethanol as a blending component for petrol - Determination of copper content - Graphite furnace atomic absorption spectrometric method

实施日期：2007-11-01

DIN 70020-7-2006

道路车辆 汽车制造 第7部分:发动机重量

Road vehicles - Automotive engineering - Part 7: Engine mass

适用范围：The following items are covered: Use of engine masses, attached parts, basic engine, complete engine, parts not considered.

实施日期：2006-06-01

BS AU 262-2-1995

Road vehicles Sheath-type glow-plugs with conical seating and their cylinder head housing Part 2:M12 x 1.25 glow-plugs ISO 6550-2:1994;

实施日期：1995-12-15

NF R22-733-2010

All terrain (AT) tyres and rims - Symbol marked pneumatic tyres on 5 degrees tapered rims - Designation, dimension, marking and load ratings.

NF R12-743-1-2010

Passenger car tyres and rims - Part 1 : tyres (metric series).

BS ISO 2575-2010

道路车辆 操纵件,指示器和信号装置的符号 替代BS AU 143F:1996

Straenfahrzeuge. Symbole für Bedienteile,Anzeige-und Warngerte Road vehicles. Symbols for controls,indicators and telltales CD-ROM Véhicules routiers. Symboles pour les commandes,indicateurs et témoins...

实施日期：2010-07-31

EN 12953-8-2001

Shell Boilers. Part 8:Requirements for Safeguards Against Excessive Pressure Incorporating Corrigendum May 2002

实施日期：2001-11-01

JB/T 3597.2-1984

汽车柴油机用喷油泵柱塞偶件技术条件

ISO 10972-2-2009

起重机 结构要求 第2部分:移动式起重机

Cranes -- Requirements for mechanisms -- Part 2: Mobile cranes

适用范围：ISO 10972-2:2009 establishes requirements specific to the mechanisms of mobile cranes, in addition to the general requirements for cranes given in ISO 10972-1. These additional requirements concern the...

发布日期：2009-05-01  实施日期：2009-05-01

DIN EN 12953-12-2004

锅壳锅炉 第12部分:锅炉用固体燃料层燃设备的要求

Shell boilers - Part 12: Requirements for grate firing systems for solid fuels for the boiler

适用范围：This part of this European Standard specifies the requirements for internal or external grate firing systems commencing at the fuel bunkers and ending at the ash extractions plant. For combination of v...

GB/T 20887.4-2010

汽车用高强度热连轧钢板及钢带 第4部分：相变诱导塑性钢

Continuously hot rolled high strength steel sheet and strip for automobile - Part 4: Transformation induced plasticity steel

发布日期：2010-09-02  实施日期：2011-06-01

JB/T 7022-2002

工业汽轮机转子体锻件技术条件

Specification for rotor forgings for industrial steam turbines

适用范围： 本标准规定了工业汽轮机转子体用经真空处理的合金钢锻件的技术要求、试验方法、检验规则、合格证书及标志。 本标准适用于工业汽轮机转子体锻件的订货、制造和验收。

实施日期：2003-04-01

EN ISO 28706-2-2011

Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Part 2:Determination of resistance to chemical corrosion by boiling acids,boiling neutral liquids and/or their vapours [Superseded:CEN EN 14483-2]

实施日期：2011-05-01

ISO 4209-2-2001

货车和公共汽车的轮胎和轮辋(米制系列).第2部分:轮辋

Truck and bus tyres and rims (metric series) -- Part 2: Rims

发布日期：2001-12-01  实施日期：2001-12-01

SH/T 0676-2005

水冷二冲程汽油机油

Water-cooled two-stroke-cycle gasoline engine oils

适用范围： 本标准规定了采用高粘度指数基础油，加入多种添加剂制成的水冷二冲程汽油机油的要求和试验方法、检验规则及标志、包装、运输和贮存。 本标准所属产品适合于各种功率的水冷二冲程汽油发动机的润滑。

发布日期：2005-04-11  实施日期：2005-09-01

ISO 7141-2005

道路车辆 轻合金车轮 撞击试验

Road vehicles -- Light alloy wheels -- Impact test

适用范围：ISO 7141:2005 specifies a laboratory test procedure to evaluate the axial (lateral) kerb impact collision properties of a wheel manufactured either wholly or partly of light alloys. It is intended for ...

发布日期：2005-07-01  实施日期：2005-07-01

JT/T 619-2005

汽车货物运输质量主要考核指标

适用范围： 本标准规定了汽车货物运输(以下简称货运)质量的主要考核指标。 本标准适用于对从事汽车货运经营性业户运输质量的评价和考核。

实施日期：2005-06-15

JB/T 2629-1979

汽车起重机和轮胎起重机 技术条件

实施日期：1980-01-01