ISO 17356-2-2005

道路车辆 汽车内置应用的开放式接口 第2部分:绑定OS、COM和NM的OSEK、VDX规范

Road vehicles open interface for embedded automotive applications. Part 2:Osek/vdx specifications for binding os,com and nm first edition

适用范围：This part of ISO 17356 gives the OSEK/VDX specifications for binding the OS (operating system), COM (communications) and NM (network management) of the open interface for embedded automotive applicatio...

实施日期：2005-05-01

ISO 22901-2-2011

道路车辆 开放式诊断数据交换(ODX) 第2部分:与排放有关的诊断数据

Road vehicles -- Open diagnostic data exchange (ODX) -- Part 2: Emissions-related diagnostic data

适用范围：ISO 22901-2:2011 is intended to ensure that diagnostic data stream information is available to diagnostic tool application manufacturers to simplify the support of the aftermarket automotive service in...

发布日期：2011-07-01  实施日期：2011-07-01

ISO 17356-3-2005

道路车辆 汽车内置应用的开放式接口 第3部分:OSEK/VDX操作系统

Road vehicles open interface for embedded automotive applications. Part 3:Osek/vdx operating system (os) first edition

适用范围：OSEK/VDX is a joint project of the automotive industry. It aims at an industry standard for an open-endedarchitecture for distributed control units in vehicles.This part of ISO 17356 describes the conc...

实施日期：2005-11-01

BS EN ISO 28199-3-2009

Beschichtungsstoffe. Beurteilung von applikationsbedingter Eigenschaften von Beschichtungssystemen. Visuelle Beurteilung von Ablaufneigung,Kocherbildung,Nadelstichbildung und Deckverm?gen Paints and varnishes. Evaluation of properties of coating systems related to the application process Part 3:Visual assessment of sagging,formation of bubbles,pinholing and hiding power Peintures et vernis. ?valuation des propriétés des systèmes de revêtement liées au mode d'application. ?valuation visuelle du f

实施日期：2009-11-30

NF T76-159-2005

Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method.

ISO 21308-2-2006

道路车辆 底盘和车体制造商间的产品数据交换(BEP) 第2部分:车体尺寸的交换参数

Road vehicles -- Product data exchange between chassis and bodywork manufacturers (BEP) -- Part 2: Dimensional bodywork exchange parameters

适用范围：ISO 21308-2:2006 provides a set of codes for the exchange of dimensional data between truck chassis manufacturers and bodywork manufacturers. It applies to commercial vehicles as defined in ISO 3833, h...

发布日期：2006-09-01  实施日期：2006-09-01

QC/T 196-1994

汽车工业科学技术档案分类表

发布日期：1995-02-20  实施日期：1995-05-01

NF T30-902-2013

Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory car-wash.

BS ISO 17356-5-2006

Strassenfahrzeuge. Offene Schnittstellen fuer eingebettete Fahrzeuganwendungen. OSEK/VDX-Netzwerk-Management (NM) Road vehicles Open interface for embedded automotive applications Part 5:OSEK/VDX Network Management (NM) Vehicules routiers. Interface ouverte pour applications automobiles embarquees. Gestion du reseau OSEK/VDX (NM)

实施日期：2006-02-03

NF G52-042-2008

Leather - Physical and mechanical tests - Determination of soiling with rubbing for automotive leather.

ISO 17356-5-2006

道路车辆 汽车内置应用的开放式接口 第5部分:OSEK/VDX网络管理(NM)

Road vehicles open interface for embedded automotive applications. Part 5:Osek/vdx network management (nm) first edition

适用范围：1.1 Embedding of the Network Management (NM)NM defines a set of services for node monitoring. Figure 1 shows how the NM is embedded into a system andthat the NM shall be adapted to specific requirement...

实施日期：2006-02-01

ISO 20566-2013

Paints and varnishes -- Determination of the scratch resistance of a coating system using a laboratory-scale car-wash

发布日期：2013-02-01  实施日期：2013-02-01

ISO 17356-4-2005

道路车辆 汽车内置应用的开放式接口 第4部分:OSEK/VDX通信(COM)

Road vehicles open interface for embedded automotive applications. Part 4:Osek/vdx communication (com) first edition

适用范围：This part of ISO 17356-4 (COM) specifies a uniform communication environment for automatic control unitapplication software.It increases the portability of application software modules by defining comm...

实施日期：2005-11-01

BS ISO 22902-2-2006

Road vehicles Automotive multimedia interface Part 2:Use cases Vehicules routiers. Interface multimedia pour l'automobile Cas d'utilisation

实施日期：2006-11-30

BS ISO 22902-6-2006

Road vehicles Automotive multimedia interface Part 6:Vehicle interface requirements Vehicules routiers. Interface multimedia pour l'automobile Exigences pour l'interface du vehicule

实施日期：2006-11-30

DIN 74361-1-2008

Disc wheels for motor vehicles and trailers - Part 1: Connection dimensions for bolt- and mixed centering

实施日期：2008-06-01

ISO 13209-3-2012

道路车辆 公开试验序列交换格式(OTX) 第3部分:标准的扩展和要求

Road vehicles -- Open Test sequence eXchange format (OTX) -- Part 3: Standard extensions and requirements

适用范围：The Open Test sequence eXchange (OTX) Core, defined in ISO 13209-2, describes the basic structure underlying every OTX document. ISO 13209-3:2012 extends the Core by a set of additional features, using...

发布日期：2012-08-01  实施日期：2012-08-01

ISO 12219-4-2013

Interior air of road vehicles -- Part 4: Method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials -- Small chamber method

发布日期：2013-04-01  实施日期：2013-04-01

DIN EN ISO 11343-2005

粘合剂 冲击条件下高强度胶粘剂耐动态劈裂的测定

Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method (ISO 11343:2003)

适用范围：This Standard specifies a dynamic impact wedge method for the determination of the cleavage resistance under impact loading ofhigh- strength adhesive bonds between two metallic adherends, when tested u...

实施日期：2005-08-01

BS ISO 20566-2005

色漆和清漆.通过实验室洗车测定涂层系统的耐划痕性

Beschichtungsstoffe. Pruefung der Kratzfestigkeit eines Beschichtungssystems mit einer Laborwaschanlage Paints and varnishes Determination of the scratch resistance of a coating system using a laborato...

适用范围：ISO 20566:2005 describes a test procedure for assessing the scratch resistance of organic paint coatings, in particular paint coatings used in the automotive industry (i.e. for assessing their car-wash...

实施日期：2005-02-23