ISO 10770-2-2012

Hydraulic fluid power. Electrically modulated hydraulic control valves. Part 2:Test methods for three-port directional flow-control valves

实施日期：2012-11-29

DIN EN 14343-2006

Rotary positive displacement pumps - Performance tests for acceptance

实施日期：2009-05-01

ISO/TR 16806-2003

气压传动 缸筒 气动滑块的负载能力及其表示方法

Pneumatic fluid power -- Cylinders -- Load capacity of pneumatic slides and their presentation method

适用范围：ISO/TR 16806:2003 describes how to calculate the loading limits for a pneumatic slide based upon external forces applied in the three principle planes of a tool plate, and applied at any point; externa...

发布日期：2003-02-01  实施日期：2003-02-01

ISO 23309-2007

液压传动系统 装配系统 用冲洗清洁管路的方法

Hydraulic fluid power systems. Assembled systems. Methods of cleaning lines by flushing first edition

适用范围：This International Standard specifies the procedures for flushing from the hydraulic lines of larger hydraulic fluidpower systems solid particulate contamination that can be introduced during the initi...

实施日期：2007-05-15

BS ISO 5597-2010

Fluidtechnik. Hydrozylinder. Einbaur?ume für einfach wirkende Kolben-und Stangendichtungen für hin-und hergehende Anwendungen,Ma?e und Toleranzen Hydraulic fluid power. Cylinders. Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications Transmissions hydrauliques Vérins Dimensions et tolérances des logements de joints d'étanchéit pour pistons et tiges de piston. simple effet dans les applications. mouvement alternatif

实施日期：2010-07-31

BS ISO 11943-1999

液压传动 在线液体自动颗粒计数系统 校准和验证方法

Hydraulic Fluid Power-On-Line Automatic Particle-Counting Systems for Liquids-Methods of Calibration and Validation Transmissions hydrauliques. Systemes de comptage automatique en ligne de particules e...

适用范围：This International Standard establishes a calibration and validation process for the use of on-line, automatic particle counting of suspended particles in liquids. A primary use is in the Multi-pass fi...

实施日期：1999-10-15

BS ISO 12151-6-2009

Leitungsanschlüsse für Fluidtechnik und allgemeine Anwendungen. Schlaucharmaturen. Schlaucharmaturen mit 60 Dichtkegel nach ISO 8434-6 Connections for hydraulic fluid power and general use. Hose fittings Part 6:Hose fittings with ISO 8434-6 60 Degrees cone ends Raccordements pour transmissions hydrauliques et applications générales. Flexibles de raccordement. Flexibles avec embouts. c?ne. 60 conformes. l'ISO 8434-6

实施日期：2009-12-31

ISO 9461-1992

液压传动 阀的油口、底板、控制装置和电磁铁的标准

Hydraulic fluid power. Identification of valve ports,subplates,control devices and solenoids first edition

适用范围：Specifies rules for the identification. Applies in particular to valves which will be developed in future with two and three ports, where today's practice of marking valve ports is different. The ident...

实施日期：1992-01-01

DIN EN 4192-2002

航空和航天.8°30′钛合金制管连接器.T型、短劲、闷头分支

Aerospace series - Pipe coupling 8?0<Minute> in titanium alloy - Tees, reduced, bulkhead branch; German version EN 4192:2001

适用范围：The document specifies the characteristics of tee union, reduced bulkhead branch in titanium alloy intended for use in aircraft fluid system pipelines.#,,#

DIN ISO 7181-2001

流体技术和元件.瓶.孔与活塞杆面积比

Hydraulic fluid power; cylinders; bores and rod area ratios

适用范围：The document specifies for each pair diameters (AL=Cylinder bore; MM=piston rod diameter) of hydraulic cylinders a corresponding standard ratio between the useful areas A1 and A2.

NF C46-517-2004

Industrial-process control valves - Part 5 : marking.

BS ISO 21287-2004

气压传动.气缸.1000kPa(10bar)系列、缸径从20mm到100mm的小型缸

Fluidtechnik. Pneumatikzylinder. Kompaktzylinder,1000-kPa-(10-bar-)Reihe,Zylinderdurchmesser von 20 mm bis 100 mm Pneumatic fluid power Cylinders Compact cylinders,1 000 kPa (10 bar) series,bores from ...

适用范围：ISO 21287:2004 establishes a metric series of single rod pneumatic compact cylinders with bores of 20 mm to 100 mm for use of at maximum working pressure of 1 000 kPa (10 bar) with and without magnetic...

实施日期：2004-11-19

ISO 19879-2010

液压传动和通用的金属管接头 液压传动接头的试验方法

Metallic tube connections for fluid power and general use -- Test methods for hydraulic fluid power connections

适用范围：ISO 19879:2010 specifies uniform methods for the testing and performance evaluation of metallic tube connections, stud ends for ports and flange connections for use in hydraulic fluid power application...

发布日期：2010-09-01  实施日期：2010-09-01

EN 4192-2001

Aerospace Series. Pipe Coupling 8 Degrees 30?in Titanium Alloy. Tees,Reduced Bulkhead Branch

实施日期：2001-10-01

ISO 4413-2010

液压传动 与系统相关的一般规则

Hydraulic fluid power -- General rules and safety requirements for systems and their components

适用范围：ISO 4413:2010 specifies general rules and safety requirements for hydraulic fluid power systems and components used on machinery as defined by ISO 12100. ISO 4413:2010 deals with all significant hazard...

发布日期：2010-11-01  实施日期：2010-11-01

BS EN 2603-2005

Aerospace series. Port ends for adaptors, threaded, with lockring. Geometric configuration

实施日期：2006-06-30

ISO 10770-1-2009

液压传动 电调制液压控制阀 第1部分:四通方向流量控制阀试验方法

Hydraulic fluid power. Electrically modulated hydraulic control valves. Part 1:Test methods for four-port directional flow-control valves second edition

发布日期：2009-09-30  实施日期：2009-10-01

NF E49-051-4-2008

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4 : stud ends for general use only with metal-to-metal sealing (type B).

ISO 4021-1992

液压传动--颗粒污染分析--从工作系统管路中提取油样

Hydraulic fluid power. Particulate contamination analysis. Extraction of fluid samples from lines of an operating system second edition [superseded:Nfpa b93.19m]

适用范围：The preferred method is to extract fluid samples from a main flowline in such a manner that the particulate contaminant in the sample is representative of the fluid flowing at the point of sampling. An...

实施日期：1992-01-01

DIN ISO 7319-1996

航空和航天.流体系统.24°锥形角米制管接头的接口

Aerospace - Fluid systems - Interface of 24<Grad> cone metric couplings (ISO 7319:1992)

适用范围：The document defines the geometry of the interface of removable 24?cone couplings for fluid systems in aircraft. The connection with the pipe of each one of the connecting elements may be of different ...