DIN EN 62217-2013

室内和室外使用的聚合物高压绝缘子 一般定义、试验方法和验收准则

Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria (IEC 62217:2012); German version EN 62217:2013

发布日期：2013-07-01  实施日期：2013-07-01

NF T30-105-2007

Paints and varnishes - T-bend test.

IEC 61326-3-1 CORR 1-2008

测量、控制和实验室用电气设备 电磁兼容性(EMC) 第3-1部分:与安全相关的系统和用于执行与安全相关功能(功能安全)的设备的抗扰性要求 勘误表1

Electrical equipment for measurement,control and laboratory use. EMC requirements. Part 3-1:Immunity requirements for safety-related systems and for equipment intended to perform safety-related functio...

实施日期：2008-09-01

BS EN 62271-207-2012

High-voltage switchgear and controlgear. Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 Kv

发布日期：2012-08-31  实施日期：2012-08-31

DIN EN 61326-2-4-2013

测量、控制和实验室用的电气设备 电磁兼容性要求 第2-4部分：特殊要求 按照IEC 61557-9的绝缘故障定位设备和按照IEC 61557-8的绝缘监测设备用试验配置、操作条件和性能标准

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insula...

发布日期：2013-07-01  实施日期：2013-07-01

ISO/IEC 10373-8-2011

识别卡 测试方法 第8部分:USB-ICC

Identification cards -- Test methods -- Part 8: USB-ICC

适用范围：ISO/IEC 10373-8:2011 describes a Test Methodology and a list of Test Scenarios to evaluate the compliance of a card with ISO/IEC 7816-12. Specifically, ISO/IEC 10373-8:2011: addresses USB 2.0 physical ...

发布日期：2011-03-01  实施日期：2011-03-01

DIN EN ISO 7235-2010

Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss

实施日期：2010-01-01

NF C42-198-9-2009

Electrical safety in low voltage distribution systems up to 1 000 V ac and 1 500 V dc - Equipment for testing, measuring or monitoring of protective measures - Part 9 : equipment for insulation fault location in IT systems.

BS ISO 13267-2010

Kunststoff-Rohrleitungssysteme aus Thermoplasten für erdverlegte Abwasserkan?le und-leitungen. B?den von Kontroll-und Einsteigsch?chten aus Thermoplasten. Prüfverfahren für die Widerstandsf?higkeit gegen Einbeulen Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics inspection chamber and manhole bases. Test methods for buckling resistance Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pressio

实施日期：2010-06-30

NF P41-604-2007

Water conditioning equipment inside buildings - Chemical dosing systems - Pre-set dosing systems - Requirements for performance, safety and testing.

DIN EN 61326-3-2-2008

测量、控制和实验室用的电气设备 电磁兼容性要求 第3-1部分:与安全相关系统和执行与安全相关功能设备（功能安全）的抗扰度要求 有指定电磁环境的工业应用

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related fun...

实施日期：2008-11-01

NF C46-050-2-4-2007

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4 : particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and

BS EN ISO 6940-2004

纺织纤维.耐燃烧.垂直定向样品易燃性的测定

Textile fabrics. Burning behaviour. Determination of ease of ignition of vertically oriented specimens

适用范围：This International Standard specifies a method for the measurement of ease of ignition of vertically oriented textile fabrics and industrial products in the form of single or multi-component fabrics (c...

BS EN 1533-2010

Holzfu?b?den. Bestimmung der Biegefestigkeit unter statischer Beanspruchung. Prüfmethoden Wood flooring-Determination of bending strength under static load-Test methods Planchers en bois. Détermination de la flexion sous charge statique. Méthodes d'essai

实施日期：2010-08-31

BS EN 62271-207-2007

High-voltage switchgear and controlgear. Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kV

实施日期：2008-03-31

DIN EN ISO 7096-2010

土方机械 司机座椅振动的试验室评价

Earth-moving machinery - Laboratory evaluation of operator seat vibration

适用范围：This standard applies to operator's seats used on earth-moving machinery. Based on input-spectral classes simulating practical conditions, this standard specifies for groups of machines having similar ...

实施日期：2010-02-01

DIN EN 61482-1-2-2007

Live working - Protective clothing against the thermal hazards of an electric arc - Part 1-2: Test methods - Method 2: Determination of arc protection class of material and clothing by using a constrained and directed arc (box test)

实施日期：2007-12-01

IEC 61557-6-2007

交流1000V和直流1500V以下低压配电系统电气安全 防护检测的试验、测量或监控设备 第6部分:TT、TN和IT系统中剩余电流装置(RCD)的有效性

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 6: Effectiveness of residual cur...

适用范围：Specifies the requirements for measuring equipment applied to the testing of the effectiveness of protective measures by regular disconnections of residual current protective devices (RCD) in TT, TN an...

发布日期：2007-07-16  实施日期：2007-07-16

ISO 13267-2010

常压地下废水和污水用热塑性塑料管道系统 热塑性塑料检查室和检修孔基础 抗弯曲的试验方法

Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics inspection chamber and manhole bases -- Test methods for buckling resistance

适用范围：ISO 13267:2010 specifies methods of test for the resistance of the base of thermoplastics inspection chambers and manholes to external soil and ground-water pressure after installation.

发布日期：2010-05-01  实施日期：2010-05-01

DIN EN ISO 17132-2008

Paints and varnishes - T-bend test

实施日期：2008-01-01