DIN ISO 5834-2-2007

Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 2: Moulded forms (ISO 5834-2:2006)

实施日期：2007-12-01

NF C93-537-1-16-2007

Communication cables - Specifications for test methods - Part 1-16 : electromagnetic performance - Coupling attenuation of cable assemblies (Field conditions).

DIN ISO 815-2-2010

硫化橡胶或热塑性橡胶 压缩永久变形的测定 第2部分:在低温下

Rubber, vulcanized or thermoplastic - Determination of compression set - Part 2: At low temperatures (ISO 815-2:2008)

实施日期：2010-09-01

BS EN 15365-2010

Hochleistungskeramik. Mechanische Eigenschaften von Keramikfasern bei hohen Temperaturen in einer reaktionsfreien Umgebung. Bestimmung des Kriechverhaltens im Kaltverbindungsverfahren Advanced technical ceramics. Mechanical properties of ceramic fibres at high temperature in a non-reactive environment. Determination of creep behaviour by the cold end method Céramiques techniques avancées. Propriétés mécaniques des fibres céramiques. haute température sous environnement non-réactif. Détermination

实施日期：2010-08-31

IEC 60974-11-2010

弧焊设备 第11部分:电焊钳

Arc welding equipment - Part 11: Electrode holders

适用范围：IEC 60974-11:2010 is applicable to electrode holders for manual metal arc welding with electrodes up to 10 mm in diameter. It is not applicable to electrode holders for underwater welding. This part of...

发布日期：2010-07-29  实施日期：2010-07-29

DIN EN 60947-5-8-2007

Low-voltage switchgear and controlgear - Part 5-8: Control circuit devices and switching elements - Three-position enabling switches (IEC 60947-5-8:2006)

实施日期：2007-08-01

IEC 60086-2-2011

原电池组 第2部分:物理和电气规范

Primary batteries. Part 2:Physical and electrical specifications Piles électriques. Partie 2:Spécifications physiques et électriques Edition 12.0

适用范围：IEC 60086-2:2011 is applicable to primary batteries based on standardized electrochemical systems. It specifies the physical dimensions; and the discharge test conditions and discharge performance requ...

发布日期：2011-02-17  实施日期：2011-02-01

BS EN 14488-4-2005+A1-2008

Testing sprayed concrete. Bond strength of cores by direct tension

实施日期：2005-09-06

DIN EN 4649-2009

Aerospace series - Handheld fire extinguishers with synthesis gases, for aircraft use - Technical specification and qualification conditions

实施日期：2009-07-01

BS ISO 18872-2007

Kunststoffe. Bestimmung der Zugeigenschaften bei hohen Dehnraten Plastics. Determination of tensile properties at high strain rates Plastiques. Détermination des propriétés en traction. hautes vitesses de déformation

实施日期：2007-05-31

DIN EN ISO 3743-1-2011

声学 声压法测定噪声源声功率级和声能级 混响场中小型可移动声源工程法 第1部分:硬壁测试室比较法

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 1: Comparison...

实施日期：2011-01-01

BS EN 717-1-2004

Wood-based panels. Determination of formaldehyde release. Formaldehyde emission by the chamber method

实施日期：2005-09-29

IEEE 1613.1-2013

Environmental and Testing Requirements for Communications Networking Devices Installed in Transmission and Distribution Facilities

实施日期：2013-12-11

BS 6319-11-1993

建筑用树脂和聚合胶料成分的试验.第11部分:压缩和拉伸时塑性变形的测定方法

Testing of resin and polymer/cement compositions for use in construction. Methods for determination of creep in compression and in tension

适用范围：Creep in compression measured on prisms loaded in hydraulic pressure rigs. Creep in tension measured on necked specimens under dead weight loading. To be read in conjunction with BS 6319-1

BS EN 61000-4-5-2006

电磁兼容性(MEC).试验和测量技术.抗浪涌(电)试验

Elektromagnetische Vertraeglichkeit (EMV). Pruef-und Messverfahren. Pruefung der Stoerfestigkeit gegen Stossspannungen Electromagnetic compatibility (EMC). Part 4-5:Testing and measurement techniques. ...

适用范围：This part of IEC 61000 relates to the immunity requirements, test methods, and range of recommended test levels for equipment to unidirectional surges caused by overvoltages from switching and lightnin...

实施日期：2006-12-29

BS EN 62501-2009

Spannungsgeführte Stromrichterventile (VSC-Ventile) für die Hochspannungsgleichstromübertragung (HG . Elektrische Prüfung Voltage sourced converter (VSC) valves for high-voltage direct current (H VDC) power transmission. Electrical testing Valves. convertisseur de source de tension (VSC) pour le transport d'énergie en courant continu. haute tension (CCHT). Essais électriques

实施日期：2009-09-30

NF T51-014-2008

塑料--状态调节和试验的标准环境

Plastics - Standard atmospheres for conditioning and testing.

ISO 15609-6-2013

Specification and qualification of welding procedures for metallic materials -- Welding procedure specification -- Part 6: Laser-arc hybrid welding

发布日期：2013-04-01  实施日期：2013-04-01

BS 4656-11-1974

机床精度及试验方法.第11部分:落地圆柱立式钻床

Praezision von Werkzeugmaschinen. Spezifikation und Pruefverfahren. Bohrmaschinen,vertikale bodenmontierte Staendertypen Accuracy of Machine Tools and Methods of Test Part 11:Drilling Machines,Vertical...

适用范围：Specifies accuracy requirements and geometrical tests with reference to BS 3800. Relates to machines in general use and of normal precision. Does not apply to testing of the running of the machine (vib...

实施日期：1974-01-01

BS EN 50065-2-1-2003

频率范围为3kHz至148.5kHz的低压电气设备的信号传输 第2-1部分:住户、商业和轻工用工作频率范围为95kHz-148.5kHz的主要通讯设备和系统的抗扰度要求

Signal bertragung auf elektrischen Niederspannungsnetzen im Frequenzbereich 3 kHz bis 148,5 kHz. Stoerfestigkeitsanforderungen an Netz-Daten bertragungsgeraete und-systeme,die im Frequenzbereich 95 kHz...

适用范围：This standard applies to electrical equipment using signals in the frequency range 95 kHz to 148,5 kHz to transmit or receive information on low voltage electrical systems, residential, commercial and ...

实施日期：2003-04-11