NF S95-164-2009

Medical supply units.

BS EN 60923-2005

电灯用辅助设备.放电灯(管形荧光灯除外)镇流器.性能要求(IEC 923-88)

Auxiliaries for lamps. Ballasts for discharge lamps (excluding tubular fluorescent lamps). Performance requirements

适用范围：This International Standard specifies performance requirements for ballasts for dischargelamps such as high-pressure mercury vapour, low-pressure sodium vapour, high-pressuresodium vapour and metal hal...

实施日期：2006-02-13

IEC/TS 62332-1-2011

电气绝缘系统(EIS) 液态和固态联合部件的热评定 第1部分:一般要求

Electrical insulation systems (EIS). Thermal evaluation of combined liquid and solid components. Part 1:General requirements

适用范围：IEC/TS 62332-1:2011(E) is applicable to EIS containing solid and liquid components where the thermal stress is the dominant ageing factor, without restriction to voltage class. This part specifies a du...

发布日期：2011-03-14  实施日期：2011-03-14

BS EN 60079-30-1-2007

Explosionsf?hige Atmosph?re. Elektrische Widerstands-Begleitheizungen. Allgemeine Anforderungen und Prüfanforderungen Explosive atmospheres. Part 30-1:Electrical resistance trace heating. General and testing requirements Atmosphères explosives. Tra?age par résistance électrique. Exigences générales et d'essais CORR:September 30,2010

实施日期：2007-05-31

BS EN 4800-006-2010

Luft-und Raumfahrt. Titan und Titanlegierungen Kneterzeugnisse. Technische Lieferbedingungen. Ausfallmuster-und Serienschmiedestücke Aerospace series. Titanium and titanium alloys. Technical specification Part 006:Pre-production and production forgings Série aérospatiale. Titane et alliages de titane. Spécification technique. Pièces types et pièces de série,forgées et matricées

实施日期：2010-11-30

BS EN 10208-1-2009

可燃性液体管路用钢管.技术交货条件.A级要求管

Stahlrohre für Rohrleitungen für brennbare Medien. Technische Lieferbedingungen. Rohre der Anforderungsklasse A Steel pipes for pipelines for combustible fluids. Technical delivery conditions Part 1:Pi...

适用范围：This European Standard specifies the technical delivery conditions for seamless and welded steel pipes forthe on land transport of combustible fluids primarily in gas supply systems but excluding pipel...

实施日期：2009-04-30

IEC 61076-2-105-2008

电子设备用连接器 产品要求 第2-105部分:圆形连接器 带螺旋锁定的M5连接器的详细规范

Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking

适用范围：IEC 61076-2-105:2008 describes circular connectors with M5 screw-locking, typically used for industrial process measurement and control. These connectors consist of fixed non-rewireable or rewireable a...

发布日期：2008-07-25  实施日期：2008-07-25

BS EN ISO 9809-2-2010

Gasflaschen. Wiederbefüllbare nahtlose Gasflaschen aus Stahl. Gestaltung,Konstruktion und Prüfung. Flaschen aus vergütetem Stahl mit einer Zugfestigkeit gr??er als oder gleich 1100 MPa Gas cylinders. Refillable seamless steel gas cylinders. Design,construction and testing Part 2:Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa Bouteilles. gaz. Bouteilles. gaz rechargeables en acier sans soudure. Conception,construction et essais. Bouteilles en acier

实施日期：2010-06-30

EN 62395-1-2006

Electrical resistance trace heating systems for industrial and commercial applications Part 1: General and testing requirements IEC 62395-1:2006

IEC/PAS 62722-2-1-2011

照明性能 第2-1部分:LED照明的具体要求

Luminaire performance. Part 2-1:Particular requirements for LED luminaires

适用范围：IEC/PAS 62722-2-1:2011(E) specifies the performance requirements for LED luminaires, together with the test methods and conditions, required to show compliance with this PAS. It applies to LED luminair...

实施日期：2011-06-22

ISO 10350-1-2007

塑料 可比单点数据的采集和表示 第1部分:模塑材料

Plastics -- Acquisition and presentation of comparable single-point data -- Part 1: Moulding materials

适用范围：ISO 10350 identifies specific test procedures for the acquisition and presentation of comparable data for certain basic properties of plastics. In general, each property is specified by a single experi...

发布日期：2007-07-01  实施日期：2007-07-01

BS EN 62037-1-2012

无源无线电频率(RF)和微波器件内调水平测量 通用要求和测量方法

Passive RF and microwave devices, intermodulation level measurement. General requirements and measuring methods

发布日期：2013-04-30  实施日期：2013-04-30

BS EN ISO 10350-1-2008

Kunststoffe. Ermittlung und Darstellung vergleichbarer Einpunktkennwerte. Formmassen Plastics. Acquisition and presentation of comparable singlepoint data Part 1:Moulding materials (ISO 10350-1:2007) Plastiques. Acquisition et présentation de caractéristiques intrinsèques comparables. Matériaux pour moulage

实施日期：2008-12-31

DIN EN 60068-2-82-2007

Environmental testing - Part 2-82: Tests - Test Tx: Whisker test methods for electronic and electric components (IEC 60068-2-82:2007)

实施日期：2007-12-01

EN 1886-2007

Ventilation for buildings. Air handling units. Mechanical performance

实施日期：2007-12-01

NF C71-000/A11-2009

Luminaires - Part 1 : general requirements and tests.

BS EN 60238-2004+A1-2009

Edison screw lampholders

实施日期：2005-01-20

BS EN 50363-1-2005

Insulating, sheathing and covering materials for low voltage energy cables. Cross-linked elastomeric insulating compounds

实施日期：2006-02-03

NF C66-367-2009

Insulators for overhead lines - Insulator strings and sets for lines with a nominal voltage greater than 1 000 V - AC power arc tests.

BS EN 15422-2008

Betonfertigteile. Festlegung für Glasfasern als Bewehrung in M?rtel und Beton Precast concrete products. Specification of glassfibres for reinforcement of mortars and concretes Produits préfabriqués en béton. Spécification des fibres de verre destinées au renforcement des mortiers et des bétons

实施日期：2008-05-30