EN 321-2001

人造板.周期试验条件下抗湿性测定

Wood-Based Panels. Determination of Moisture Resistance under Cyclic Test Conditions

实施日期：2001-11-01

DIN ISO 1817-2008

Rubber, vulcanized - Determination of the effect of liquids

实施日期：2008-08-01

NF H00-017-1993

Packaging. Complete, filled transport packages. Water immersion test.

EN ISO 3210-2010

Anodizing of aluminium and its alloys. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution

实施日期：2010-07-01

DIN EN 321-2002

木基板.周期试验条件下抗湿性测定

Wood-based panels - Determination of moisture resistance under cyclic test conditions

EN 60512-14-6-2006

Connectors for electronic equipment - Tests and measurements Part 14-6: Sealing tests - Test 14f: Interfacial sealing IEC 60512-14-6:2006

ISO 175-2010

塑料 测定液体化学品对塑料影响的试验方法

Plastics -- Methods of test for the determination of the effects of immersion in liquid chemicals

适用范围：ISO 175:2010 specifies a method of exposing test specimens of plastic materials, free from all external restraint, to liquid chemicals, and methods for determining the changes in properties resulting f...

发布日期：2010-10-01  实施日期：2010-10-01

BS 7870-6.3-1999

LV und MV polymerisch isolierte Kabel fuer Verteilungsund Bildungsnetzen. Spezifikation fuer 0.6/1 kV und 1.9/3.3 Stromkabel mit besonderer Feuerleistung zum Gebrauch in Kraftwerken. Kabel mit thermischer Isolierung und nichthalogener Verkleidung LV and MV Polymeric Insulated Cables for Use by Distribution and Generation Utilities-Part 6:Specification for 0.6/1 kV and 1.9/3.3 kV Power Cables with Special Fire Performance for Use in Power Stations-Section 6.3:Cables with Thermosetting Insulation

实施日期：1999-07-15

BS 2499-3-1993

混凝土路面的热敷接缝密封系统.试验方法

Hot-Applied Joint Sealant Systems for Concrete Pavements Part 3:Methods of Test Superseded BS 2499:1973;

适用范围：Describes methods of test for normal and fuel resistant sealants for use in roads, airfields, and other concrete pavements.

实施日期：1993-01-01

EN ISO 489-1999

Plastics. Determination of Refractive Index ISO 489:1999

实施日期：1999-04-01

IEC 60512-14-5-2006

电子设备用连接器 试验和测量 第14-5部分:密封试验 试验14e:在低气压下的沉浸

Connectors for electronic equipment - Tests and measurements - Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure

适用范围：Details a standard test method to assess the effectiveness of the sealing of a connector against ingress of water by exposure to low pressure whilst immersed in a salt solution. Is particularly, but no...

发布日期：2006-03-23  实施日期：2006-03-23

BS EN 2101-1991

铝合金和锻铝合金铬酸阳极化规范

Chromsaeure-Anodisieren von Aluminium und Aluminium-Knetlegierungen Chromic Acid Anodizing of Aluminium and Wrought Aluminium Alloys Anodisation chromique de l'aluminium et des alliages d'aluminium cor...

适用范围：This standard specifies the required characteristics for the performance of chromic acid anodizing with or without sealing as well as quality assurance of the coating obtained. It applies to parts in a...

实施日期：1991-01-01

BS EN 60679-5-1-1998

经质量评估的石英晶体受控振荡器.空白详细规范.资格鉴定

Quarzoszillatoren mit bewerteter Qualitaet. Vordruck fuer Bauartspezifikation. Bauartanerkennung Quartz Crystal Controlled Oscillators of Assessed Quality-Part 5-1:Blank Detail Specification-Qualificat...

适用范围：To be read in conjunction with BS EN 60679-1:1998, BS EN 60679-5:1998

实施日期：1998-11-15

BS 5194-4-1985

外科器械.第4部分:小剪刀、大剪刀和其他有关节的切割器械

Surgical instruments. Specification for scissors, shears and other jointed cutting instruments

适用范围：Made of stainless steel. Includes scissors, shears and rongeurs.

实施日期：1986-01-31

DIN ISO 9022-8-2000

光学和光学仪器.环境试验方法.第8部分:高压、低压及浸渍

Optics and optical instruments - Environmental test methods - Part 8: High pressure, low pressure, immersion (ISO 9022-8:1994)

BS 5642-2-1983

窗台板及盖顶板.第2部分:预制混凝土、铸石、粘土、石片与天然石制顶盖板

Sills and copings. Specification for copings of precast concrete, cast stone, clayware, slate and natural stone

适用范围：Requirements for materials, mass, cross section dimensions and tolerances. The appendix gives recommendations for design and installation of coping systems.

BS 4618-4.1-1972

Empfehlungen fuer die Darstellung von Kunststoffkonstruktionsdaten. Oekologische und chemische Effekte. Chemische Bestaendigkeit gegen Fluessigkeiten Recommendations for the Presentation of Plastics Design Data-Part 4:Environmental and Chemical Effects-Section 4.1:Chemical Resistance to Liquids Recommandations pour la presentation des donnees de conception des plastiques. Effets ambiants et chimiques. Resistance chimique aux liquides

实施日期：1972-03-15

ISO 4433-1-1997

热聚性塑料管 耐液体化学药品 分类 第1部分:浸入试验的方法

Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 1: Immersion test method

发布日期：1997-12-01  实施日期：1997-12-01

BS 4162-1983

钮扣的试验方法

Methods of Test for Buttons

适用范围：Describes tests simulating the ability of buttons to withstand various methods of cleaning to which the garments they are attached to, may be subjected. Also includes tests for strength and abrasion.

实施日期：1983-03-31

DIN EN ISO 2931-2010

铝及铝合金阳极氧化 用导纳法测量阳极氧化膜封孔质量的评定

Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance (ISO 2931:2010); German version EN ISO 2931:2010

实施日期：2010-12-01