NF E48-640-1973

液压传动流体 难燃流体使用规程

Fluids for hydraulic power systems. Directions for use of fire-resistant fluids.

BS ISO 7790-1997

液压传动.规格为03和05型的四油口标准设计叠阀和四油口定向控制阀.紧固尺寸

Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05. Clamping dimensions

适用范围：This International Standard specifies clamping dimensions of four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05, on mounting surfaces. The dimensions and sizes...

实施日期：1998-03-15

GB/T 19925-2005

液压传动 隔离式充气蓄能器优先选择的液压油口

Hydraulic fluid power-Gas-loaded Accumulators with separator-Selection of preferred hydraulic port

适用范围：本标准规定了液压传动系统中使用的隔离式充气蓄能器(除第3章外以下简称蓄能器)优先选择的液压油口的型式和尺寸。

发布日期：2005-09-19  实施日期：2006-04-01

ISO 6162-1-2002

液压传动 具有分体或整体法兰夹和米制或英制螺钉的法兰接头 第1部分:3.5 MPa(35巴)至35 MPa(350巴）、DN13-DN127压力下使用的法兰接头

Hydraulic fluid power. Flange connectors with split or one-piece flange clamps and metric or inch screws. Part 1:Flange connectors for use at pressures of 3,5 mpa (35 bar) to 35 mpa (350 bar),dn 13 to ...

适用范围：This part of ISO 6162 specifies complete general and dimensional characteristics for flange heads, split flange clamps (FCS), one-piece flange clamps (FC) and ports applicable to four-screw, split and ...

实施日期：2002-12-01

CNS 5702-1980

液压用齿轮泵检验法-排出口径10-50mm

Method of Test of Gear Pumps for Hydraulic Use - Discharge Diameter 10 - 50 mm

发布日期：1980-07-09  实施日期：1980-07-09

EN 15714-4-2009

Industrial valves. Actuators. Part 4:Hydraulic part-turn actuators for industrial valves. Basic requirements

实施日期：2009-10-01

ISO 4411-2008

液压传动 阀 压差/流动特性的测定

Hydraulic fluid power. Valves. Determination of pressure differential/flow characteristics second edition

实施日期：2008-10-01

DIN ISO 10766-1998

液压流体功率油缸、活塞和连杆用矩形截面轴承环的尺寸

Hydraulic fluid power, cylinders - Housing dimensions for rectangular-section-cut bearing rings for pistons and rods (ISO 10766:1996)

适用范围：The document establishes the preferred range of nominal dimensions and associated tolerances for a series of hydraulic cylinder piston and rod housings for rectangular cut bearing rings, of the type sh...

GB/T 3766-1983

液压系统通用技术条件

Hydraulic fluid power--General rules for the application of equipment to transmission and control systems

ISO 6149-2-2006

液压和一般用途接头 带ISO 261米制螺纹和O形圈密封的油口和螺纹端头 第2部分:重型(S系列)螺栓端头的尺寸、设计、试验方法和要求

Connections for hydraulic fluid power and general use ports and stud ends with iso 261 metric threads and o-ring sealing. Part 2:Dimensions,design,test methods and requirements for heavy-duty (s series...

适用范围：This part of ISO 6149 specifies dimensions, performance requirements and test procedures for metricadjustable and non-adjustable heavy-duty (S series) stud ends and O-rings.Stud ends in accordance with...

实施日期：2006-02-15

BS EN 81-77-2013

电梯制造与安装安全规范 乘客和客货电梯的特殊应用 地震中的电梯

Safety rules for the construction and installations of lifts. Particular applications for passenger and goods passenger lifts. Lifts subject to seismic conditions

发布日期：2013-11-30  实施日期：2013-11-30

ISO 7181-1991

液压传动 缸筒 活塞和活塞杆面积比

Hydraulic fluid power -- Cylinders -- Bore and rod area ratios

适用范围：Specifies for each pair of diameters (AL = cylinder bore; MM = piston rod diameter) of cylinders a corresponding standard ratio between the useful areas A1 and A2. This second edition cancels and repla...

发布日期：1991-10-01  实施日期：1991-10-01

ISO/TR 16806-2003

气压传动 缸筒 气动滑块的负载能力及其表示方法

Pneumatic fluid power -- Cylinders -- Load capacity of pneumatic slides and their presentation method

适用范围：ISO/TR 16806:2003 describes how to calculate the loading limits for a pneumatic slide based upon external forces applied in the three principle planes of a tool plate, and applied at any point; externa...

发布日期：2003-02-01  实施日期：2003-02-01

BS AU 203A-1988

Nutzkraftwagen;Masse der Verbindungen zwischen Nebenabtrieben und Anbaugeraeten Dimensions of Couplings Between Power Take offs (PTOs) and Ancillary Driven Units on Commercial Road Vehicles Dimensions des liaisons entre prises de puissance et organes recepteurs de puissance sur les vehicules utilitaires. Specifications

实施日期：1988-01-01

BS EN ISO 9974-3-2000

普通和液力用连接器.用ISO 261螺纹的弹性或金属与金属间密封的气门和双头螺栓端头.(B型)金属与金属间密封的双头螺栓端头

Leitungsanschluesse fuer FLuidtechnik und allgemeine Andwendung. Einschraubloecher und Einschraubzapfen mit Gewinde nach ISO 261 und Elastomerdichtung oder metallener Dichtkante. Einschraubzapfen mit m...

适用范围：This part of ISO 9974 specifies dimensions, perform-ance requirements and test procedures for heavy-duty (S series), light-duty (L series) and extra-light-duty (LL series) stud ends with ISO 261 thread...

实施日期：2000-08-15

BS 5327-1976

流体动力装置用后直角弯头规范

Vorgebogene Rohrleitungskruemmer fuer die Oelhydraulik Specification for Swept elbow bends for fluid power applications Coudes pour transmissions hydrauliques

适用范围：Specifies envelope dimensions of 90<deg> and 135<deg> short and long tangent elbows. Most of the long tangent elbows are suitable for the manufacture of hose compression fittings in accordance with BS ...

实施日期：1976-03-31

JIS F6714-1995

起锚机

Windlasses

适用范围：この規格は，外洋を航行する船に装備する電動，油圧及び蒸気駆動ウインドラス(以下，ウインドラスという。)について規定する。

GB/T 3367.2-2000

铁道机车名词术语 液力传动系统零部件名词

Glossary of terms for railwaylocomotive--Names of component parts for hydraulic transmission system

适用范围：本标准规定了内燃机车液力传动系统的主要零部件名词。　　本标准适用于内燃机车的液力传动系统。

发布日期：2000-10-25  实施日期：2001-08-01

DIN EN ISO 6149-3-2007

Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006)

实施日期：2007-05-01

DIN ISO 8132-2008

Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Mounting dimensions for accessories

实施日期：2008-06-01