ISO 3452-4-1998

无损检验--渗透性探伤检测 第4部分:设备

Non-destructive testing -- Penetrant testing -- Part 4: Equipment

发布日期：1998-12-01  实施日期：1998-12-01

GB/T 22805.2-2008

纸和纸板 耐脂度的测定 第2部分：表面排斥法

Paper and board - Determination of grease resistance - Part 2: Surface repellency test

适用范围：GB/T 22805的本部分规定了测定纸和纸板耐脂度的一种方法。 　　本部分适用于经防油剂（如氟烷基化合物）浆内或表面施胶的纸和纸板。

发布日期：2008-12-30  实施日期：2009-09-01

NF A03-153-1-2006

Metallic materials - Rockwell hardness test - Part 1 : test method (scales A, B, C, D, E, F, G, H, K, N, T).

NF A09-120-1-2013

Non-destructive testing - Penetrant testing - Part 1 : general principles

ISO 3452-6-2008

无损检测 渗透检验 第6部分;温度低于10℃的渗透检验

Non-destructive testing -- Penetrant testing -- Part 6: Penetrant testing at temperatures lower than 10 degrees C

适用范围：ISO 3452-6:2008 specifies the requirements for non-destructive testing using penetrant, particular to applications at low temperatures (lower than + 10 °C) as well as the method for qualification of su...

发布日期：2008-12-01  实施日期：2008-12-01

EN ISO 6508-1-2005

Metallic materials. Rockwell hardness test. Part 1:Test method (scales A,B,C,D,E,F,G,H,K,N,T) ISO 6508-1:2005

实施日期：2005-12-01

GB/T 22805.1-2008

纸和纸板 耐脂度的测定 第1部分：渗透法

Paper and board - Determination of grease resistance - Part 1: Permeability test

适用范围：GB/T 22805的本部分规定了纸和纸板耐脂度的测定方法。即测定拟脂肪材料（棕榈油）渗透如防油纸和植物羊皮纸等食品包装纸或纸板所用的时间。 　　本部分适用于有折痕和无折痕的纸和纸板。 　　本部分也适用于内部或表面施胶，或通...

发布日期：2008-12-30  实施日期：2009-09-01

DIN EN ISO 6508-2-2006

金属材料 洛氏硬度测试 第2部分:试验机的检验和校准(A,B,C,D,E,F,G,H,K,N,T标尺)

Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)

适用范围：This part of ISO 6508 specifies a method of verification of testing machines for determining Rockwell hardness (scales A, B, C, D, E, F, G, H, K, N, T) in accordance with ISO 6508-1. It specifies a dir...

实施日期：2006-03-01

ISO 3452-1-2008

无损检测 渗透检验 第1部分:一般原则

Non-destructive testing -- Penetrant testing -- Part 1: General principles

适用范围：ISO 3452-1:2008 defines a method of penetrant testing used to detect discontinuities, e.g. cracks, laps, folds, porosity and lack of fusion, which are open to the surface of the material to be tested. ...

发布日期：2008-09-01  实施日期：2008-09-01

DIN EN ISO 3452-5-2009

无损检测 渗透检验 第5部分:温度高于50℃的渗透检验

Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50℃

适用范围：This part of ISO 3452 specifies the testing requirements particular to applications at higher temperatures (over50 ℃) and also the method for qualification of suitable testing products. It applies only...

实施日期：2009-04-01

ISO 3452-5-2008

无损检测 渗透检验 第5部分;温度高于50℃的渗透检验

Non-destructive testing -- Penetrant testing -- Part 5: Penetrant testing at temperatures higher than 50 degrees C

适用范围：ISO 3452-5:2008 specifies the requirements for non-destructive testing using penetrant, particular to applications at higher temperatures (higher than 50 °C) as well as the method for qualification of ...

发布日期：2008-12-01  实施日期：2008-12-01

BS EN ISO 3059-2012

非破坏性的测试 渗透探伤和磁粉探伤 查看条件

Non-destructive testing. Penetrant testing and magnetic particle testing. Viewing conditions

发布日期：2012-12-31  实施日期：2012-12-31

ISO 3452-3-2013

无损检测.渗透性探伤检验.第3部分:基准试块

Non-destructive testing -- Penetrant testing -- Part 3: Reference test blocks

适用范围：ISO 3452-3:2013 describes two types of reference blocks: Type 1 reference blocks are used to determine the sensitivity levels of both fluorescent and colour contrast penetrant product families; Type 2 ...

发布日期：2013-11-01  实施日期：2013-11-01

DIN EN ISO 3059-2013

Non-destructive testing –Penetrant testing and magnetic particle testing –Viewing conditions

ISO 3059-2001

无损检验 渗透检验和磁粒检验 观察条件

Non-destructive testing -- Penetrant testing and magnetic particle testing - Viewing conditions

发布日期：2001-11-01  实施日期：2001-11-01

GB/T 5275.7-2014

气体分析 动态体积法制备校准用混合气体 第7部分：热式质量流量控制器

Gas analysis―Preparation of calibration gas mixtures using dynamic volumetric methods―Part 7: Thermal mass-flow controllers

适用范围：本部分详细阐述了使用市售热式质量流量控制器利用纯气或混合气连续制备含两 种或多种组分的校准混合气体的方法。 使用本方法制备校准混合气体所能达到的最好水平如下:相对测量扩展不确定度（由合成标准不确 定度乘以包含...

发布日期：2014-07-08  实施日期：2014-12-01

DIN EN ISO 3059-2002

无损检测.渗透试验和磁粉试验.视觉条件

Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions (ISO 3059:2001)

适用范围：This European Standard describes the control of the viewing conditions for magnetic particle and penetrant testing. It includes minimum requirements for the illuminance and UV-A irradiance and their me...

DIN EN ISO 6508-1-2006

金属材料 洛氏硬度试验 第1部分:试验方法(A、B、C、D、E、F、G、H、K、N、T标尺)

Metallic materials - Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)

适用范围：This part of ISO 6508 specifies the method for Rockwell and Rockwell superficial hardness tests for metallic materials.

实施日期：2006-03-01

NF A03-153-2-2006

Metallic materials - Rockwell hardness test - Part 2 : verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T).

EN ISO 3452-6-2008

Non-destructive testing. Penetrant testing. Part 6:Penetrant testing at temperatures lower than 10 degrees C

实施日期：2008-12-01