IEC 61853-1-2011

光伏模块性能测试和能量等级 第1部分:辐照度和温度性能测量以及额定功率

Photovoltaic (PV) module performance testing and energy rating - Part 1: Irradiance and temperature performance measurements and power rating

适用范围：IEC 61853-1:2011 describes requirements for evaluating PV module performance in terms of power (watts) rating over a range of irradiances and temperatures. The object is to define a testing and rating ...

发布日期：2011-01-26  实施日期：2011-01-26

BS EN 61300-2-48-2009

光纤互连装置和无源元件 基本试验和测量程序 第2-48部分:试验 温湿度循环

Lichtwellenleiter. Verbindungselemente und passive Bauteile. Grundlegende Prüf-und Messverfahren. Prüfungen. Temperatur-Feuchte-Zyklus Fibre optic interconnecting devices and passive components. Basic ...

适用范围：This part of IEC 61300 details a procedure for determining the suitability of a fibre opticdevice or closure to withstand variations in humidity and temperature that may occur duringoperation, storage ...

实施日期：2009-05-31

EN 62137-1-3-2009

Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-3: Cyclic drop test

ISO 3384-2-2012

Rubber, vulcanized or thermoplastic -- Determination of stress relaxation in compression -- Part 2: Testing with temperature cycling

发布日期：2012-11-01  实施日期：2012-11-01

NF L54-002-145-2003

Aerospace series - Elements of electrical and optical connection - Test methods - Part 617 : optical elements - Temperature cycling.

EN 62137-1-2-2007

Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-2: Shear strength test

NF C93-902-46-2006

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-46 : tests - Damp heat cyclic.

NF C57-113-1-2011

Photovoltaic (PV) module performance testing and energy rating - Part 1 : irradiance and temperature performance measurements and power rating.

IEC 62137-1-2-2007

表面安装技术 表面安装焊缝的环境和耐久性试验方法 第1-2部分:抗剪强度试验

Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-2: Shear strength test

适用范围：The test method described in IEC 62137-1-2:2007 is applicable to leadless surface mounting components and surface mounting connectors to which pull test is not applicable. It is not applicable to multi...

发布日期：2007-07-25  实施日期：2007-07-25

IEC/TR 62627-03-01-2011

光纤互联设备和无源元件--第03-01部分:可靠性--温度和湿度循环器件连接器的纤维活塞故障用验收试验的设计:界限分析

Fibre optic interconnecting devices and passive components. Part 03-01:Reliability. Design of an acceptance test for fibre pistoning failure of connectors during temperature and humidity cycling:demarc...

适用范围：IEC/TR 62627-03-01:2011(E) gives an example of the design of an acceptance test for ferrule style connectors when the dominant failure mode is fibre pistoning. The example applies to connectors which u...

发布日期：2011-04-07  实施日期：2011-04-01

DIN EN 62137-1-1-2008

Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-1: Pull strength test

实施日期：2008-02-01

DIN EN 62137-1-3-2009

表面安装技术 表面安装焊缝的环境和耐久性试验方法 第1-3部分:循环坠落试验

Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-3: Cyclic drop test

实施日期：2009-07-01

NF C93-704-2005

Environmental and endurance testing - Test methods for surface-mount boards of area array type packages FBGA, BGA, FLGA, LGA, SON and QFN.

ASTM E2264-2005

温度周期变化对开窗产品影响的测定规程

Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products

实施日期：2005-05-01

EN ISO 15027-1-2012

浸渍服装 第1部分:耐磨服装、包括安全的要求

Immersion suits - Part 1:Constant wear suits,requirements including safety

实施日期：2012-11-01

BS EN 12293-2000

塑料管道系统 热水和冷水用热塑管和配件 已安装的组件耐温度变化性能的试验方法

Kunststoff-Rohrleitungssysteme. Rohre aus Thermoplasten und Formstuecke fuer Warm-und Kaltwasser. Pruefverfahren des Widerstandes ven montierten Baugruppen gegen Temperaturwechselbeanspruchung Plastics...

适用范围：This standard specifies a method for testing the resistance to temperature cycling of joints for piping systems with rigid or flexible thermoplastics pipes. It is applicable to thermoplastics piping sy...

实施日期：2000-05-15

NF T54-940-1999

Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of mounted assemblies to tempetarure cycling.

EN 61300-2-46-2006

Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-46: Tests Damp heat cyclic

DIN EN 61300-2-46-2007

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-46: Tests - Damp heat cyclic (IEC 61300-2-46:2006); German version EN 61300-2-46:2006

实施日期：2007-03-01

IEC 61300-2-46-2006

纤维光学互连器件和无源器件 基本试验和测量程序 第2-46部分:试验 循环湿热

Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-46:Tests. Damp heat,cyclic Dispositifs d'interconnexion et composants passifs. fibres optiques....

适用范围：The purpose of this part of IEC 61300 is to describe a test to determine the suitability of a fibre optic device to withstand the environmental condition of high humidity and change of temperature whic...

实施日期：2006-07-01