NF C51-318-21/A1+A2-2000

Rotating electrical machines - Part 18 : functional evaluation of insulation systems - Section 21 : test procedures for wire-wound windings - Thermal evaluation and classification.

NF L54-147-002-2008

Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperature - 65 oC to 175 oC or 200 oC continuous - Part 002 : specification of performance and contact arrangements.

NF E37-403-1988

Methods of test for full-flow lubricating oil filters for internal combustion engines. Part 3 : resistance to high pressure drop and to elevated temperature.

BS EN 12703-2012

Adhesives for paper and board,packaging and disposable sanitary products. Determination of low temperature flexibility or cold crack temperature

发布日期：2012-03-31 

NF T31-209-2005

Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test.

ISO 3384-2-2012

Rubber, vulcanized or thermoplastic -- Determination of stress relaxation in compression -- Part 2: Testing with temperature cycling

发布日期：2012-11-01  实施日期：2012-11-01

DIN EN 3372-002-2008

Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65℃ to 175℃ or 200℃ continuous - Part 002: Specification of performance and contact arrangements

实施日期：2008-10-01

DIN 74069-1996

汽车及挂车的后向反光器标志牌

Retro-reflective registration plates for motor vehicles and trailers

适用范围：The document specifies material, colour, corrosion, reflective material, design, adhesion, weather resistance, mechanical resistance, temperature resistance, testing, and marking.

IEC 60601-2-19-2009

医用电气设备 第2-19部分:婴儿培养箱的基本安全和基本性能专用要求

Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators

适用范围：IEC 60601-2-19:2009 specifies safety requirements for infant incubators. This particular standard amends and supplements IEC 60601-1:2005, Medical electrical equipment - Part 1: General requirements fo...

发布日期：2009-02-20  实施日期：2009-02-20

DIN EN 60317-58-2011

Specifications for particular types of winding wires. Part 58:Polyamide-imide enamelled rectangular copper wire,class 220 (IEC 60317-58:2010); German version EN 60317-58:2010

EN 3372-009-2007

Aerospace series. Connectors,electrical,circular,medium and high contact density,scoop-proof with bayonet coupling,operating temperatures. 65 Degrees C to 175 Degrees C or 200 Degrees C continuous. Part 009:Receptacle,jam nut mounting. Product standard

实施日期：2007-07-01

ISO 9022-2-2002

光学和光学仪器 环境试验方法 第2部分:冷,热,潮气

Optics and optical instruments -- Environmental test methods -- Part 2: Cold, heat and humidity

适用范围：This part of ISO 9022 specifies methods for the testing of optical instruments and instruments containing optical components, under equivalent conditions, for their ability to resist temperature and ai...

发布日期：2002-10-01  实施日期：2002-10-01

DIN EN 12878-2006

基于水泥和/或石灰的建材着色涂料 要求和试验方法

Pigments for colouration of building materials based on cement and/or lime - Specifications and methods of test

实施日期：2006-05-01

EN 15818-2011

Polymer modified bituminous thick coatings for waterproofing. Determination of dimensional stability at high temperature

实施日期：2011-03-01

NF L54-147-008-2008

Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 oC to 175 oC or 200 oC continuous - Part 008 : Free plug with grounding spring - Product standard.

DIN IEC/TS 60034-18-41-2007

Rotating electrical machines - Part 18-41: Qualification and type tests for Type I electrical insulation systems used in rotating electrical machines fed from voltage converters (IEC/TS 60034-18-41:2006)

实施日期：2007-04-01

NF L54-002-020-1993

Aerospace series. Element of electrical and optical connection. Test methods. Part 301 : endurance at temperature.

EN 15092-2008

Building valves. Inline hot water supply tempering valves. Tests and requirements

实施日期：2008-06-01

BS EN 3372-005-2007

Luft-und Raumfahrt. Elektrische Rundsteckverbinder,kontaktgeschützt,Bajonettkupplung,Betriebstemperatur-65 °C bis 175 °C oder 200 °C konstant. Hermetischer fester Steckverbinder mit rundem Schwei oder L?tflansch. Produktnorm Aerospace series. Connectors,electrical,circular,medium and high contact density,scoop-proof with bayonet coupling,operating temperatures p65 °C to 175 °C or 200 °C continuous. Part 005:Receptacle,hermetic,round flange,solder mounting. Product standard Série aérospatiale. Co

实施日期：2007-08-31

ISO 3917-1999

道路车辆 安全玻璃材料 耐辐射,耐高温,耐湿度耐燃烧和耐模拟气候的试验方法

Road vehicles -- Safety glazing materials -- Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering

发布日期：1999-07-01  实施日期：1999-07-01