JGJ/T 225-2010

大直径扩底灌注桩技术规程(附条文说明)

Technical specification for large-diameter belled cast-in-place pile foundation

适用范围：为在大直径扩底灌注桩勘察、设计、施工及质量检验中做到技术先进、经济合理、安全适用、确保质量、保护环境，制定本规程。 本规程适用于建筑工程的大直径扩底灌注桩的勘察、设计、施工及质量检验。 大直径扩底灌注桩的勘察、设计...

发布日期：2010-11-04  实施日期：2011-08-01

NF E86-502-3-2002

Cryogenic vessels - Large transportable vacuum insulated vessels - Part 3 : operational requirements.

BS EN 13385-2002

可运输气瓶 永久的和液化的气体(乙炔除外)用蓄电池驱动车辆 灌装时的检验

Ortsbewegliche Gasflaschen. Batteriefahrzeuge fuer bestaendige und verfluessigte Gase (ausser Acetylen). Pruefung zum Zeitpunkt des Fuellens Transportable Gas Cylinders-Battery Vehicles for Permanent a...

适用范围：This European Standard specifies requirements for inspection before, during and after the time of filling for battery vehicles. This standard does not apply to acetylene battery vehicles which are cove...

实施日期：2002-04-18

NF M88-713-2008

LPG equipment and accessories - Procedure for checking LPG cylinders before, during and after filling.

BS EN 13630-9-2004

民用爆炸物.点火索和安全引信.点火索之间爆炸传递的测定

Explosivstoffe fuer zivile Zwecke. Sprengschnuere und Sicherheitsanzuendschnuere. Bestimmung der Detonationsuebertragung von Sprengschnur zu Sprengschnur Explosives for civil uses Detonating cords and ...

适用范围：This European Standard specifies a method of verifying whether a flexible plastic-coated detonating cord or a flexible fibrous-overbraided detonating cord, for civil use, can be initiated by a flexible...

实施日期：2004-05-19

NF A49-901-2-2010

Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 2 : quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa.

ISO 9809-2-2010

气瓶 可重复充装的无缝钢气瓶 设计、制造和测试 第2部分:抗拉强度大于或等于1100MPa的淬火和回火钢瓶

Gas cylinders. Refillable seamless steel gas cylinders. Design,construction and testing. Part 2:Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa

适用范围：This part of ISO 9809 specifies minimum requirements for the material, design, construction and workmanship,manufacturing processes, examination and testing at manufacture of refillable quenched and te...

发布日期：2010-04-15  实施日期：2010-04-15

NF M88-126-2009

Tanks for transport of dangerous goods - Service equipment for tanks - Adaptator for bottom loading and unloading.

DIN EN 934-6-2006

混凝土、灰浆和水泥浆用混合剂 第6部分:取样、合格检查和合格评定

Admixtures for concrete,mortar and grout - Part 6: Sampling,conformity control and evaluation of conformity

发布日期：2006-03-01  实施日期：2006-03-01

NF T70-630-12-2003

Explosives for civil uses - Detonating cords and safety fuses - Part 12 : determination of burning duration of safety fuses.

NF P18-512-1-2006

Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1 : definitions, specifications and conformity criteria.

BS EN 14853-2005

Aerosol containers. Enclosed space ignition test

实施日期：2006-03-31

JT/T 871-2013

混凝土灌柱桩用高强钢塑声测管

High-strength steel-plastic sonic-testing pipes for concrete bored piles

适用范围：本标准规定了混凝土灌注桩用高强钢塑声测管的产品型号和规格、技术要求、试验方法、检验规则、标志、包装、运输和储存等。 本标准适用于混凝土灌注桩超声波法检测用高强钢塑声测管。

发布日期：2013-10-09  实施日期：2014-01-01

DIN EN 13385-2002

能运输的气瓶.永久性和液化气用电瓶车.灌注时的检验

Transportable gas cylinders - Battery vehicles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling

实施日期：2002-06-01

BS EN ISO 9809-2-2010

Gasflaschen. Wiederbefüllbare nahtlose Gasflaschen aus Stahl. Gestaltung,Konstruktion und Prüfung. Flaschen aus vergütetem Stahl mit einer Zugfestigkeit gr??er als oder gleich 1100 MPa Gas cylinders. Refillable seamless steel gas cylinders. Design,construction and testing Part 2:Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa Bouteilles. gaz. Bouteilles. gaz rechargeables en acier sans soudure. Conception,construction et essais. Bouteilles en acier

实施日期：2010-06-30

DIN 6111-2002

包装.高压包装.带非移动可分配器,可再使用

Packaging - High-pressure packages - Reusable,with non-removable dispensing facility

适用范围：The document applies to pressurised dispensers which are filled with a product and charged with a propellant at the manufacturer's plant. The dispensing valve is clinched to the container and is intend...

NF M88-729-2011

Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing.

BS EN 12863-2002

可移动汽缸-液化乙炔汽缸定期检查和维护

Ortsbewegliche Gasflaschen. Wiederkehrende Pruefung und Instandhaltung von Gasflaschen fuer geloestes Acetylen Transportable gas cylinders Periodic inspection and maintenance of dissolved acetylene cyl...

适用范围：This European Standard specifies seamless and welded steel or seamless aluminium alloy cylinders intended for the transport of acetylene in cylinders of water capacity up to 150 l and specifies the req...

实施日期：2002-08-09

YSJ 212-1992

灌柱桩基础技术规程 (附条文说明31页）

适用范围：本规程适用于冶金工业建设工业与民用建筑物及构筑物的灌注桩基础工程勘察、设计与施工。

发布日期：1906-06-08  实施日期：1906-06-08

EN 13776-2002

Filling and Discharge Procedures for LPG Road Tankers

实施日期：2002-06-01