NF A89-572-2006

Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross tension testing.

ISO 9313-1989

接触点焊设备 冷却管

Resistance spot welding equipment -- Cooling tubes

适用范围：Specifies diameters and cut-off angles of cooling tubes. Establishes also designation, materials and marking.

发布日期：1989-04-01  实施日期：1989-04-01

ISO 8430-2-1988

电阻点焊—电极夹具—第2部分:莫氏装配锥度

Resistance spot welding -- Electrode holders -- Part 2: Morse taper fixing

适用范围：Specifies the dimensions and tolerances of resistance spot welding electrode holders (type B) without offset and with a facility for cable clamping, and where a male Morse taper is used to fix the hold...

发布日期：1988-12-01  实施日期：1988-12-01

ISO 16432-2006

电阻焊 采用浮凸焊接法对无镀层和有镀层低碳钢的凸焊程序

Resistance welding -- Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s)

适用范围：ISO 16432:2006 specifies requirements for embossed-resistance-projection welding in the fabrication of assemblies of uncoated and metallic coated low carbon steel comprising two thicknesses of metal, w...

发布日期：2006-02-01  实施日期：2006-02-01

BS EN 29313-1992

点焊设备.冷却管

Specification for resistance spot welding equipment. Cooling tubes

适用范围：Dimensions and tolerances for cooling tubes.

BS EN ISO 14273-2001

电阻点焊,电阻缝焊和绸纹多点凸焊的的抗剪试验用试样尺寸和程序 ISO 14273:2000

Probenmasse und Durchfuehrung fuer die Scherzugpruefung an Widerstandspunkt,Naht und Buckelschweissungen mit gepraegten Buckeln Specimen Dimensions and Procedure for Shear Testing Resistance Spot,Seam ...

适用范围：This International Standard specifies specimen dimensions and a testing procedure for shear testing of spot, seam and embossed projection welds, in overlapping sheets, in any metallic material of thick...

实施日期：2001-11-08

BS EN 28430-3-1992

点焊.电极夹具.第3部分:端推力直柄接头

Specification for resistance spot welding. Electrode holders. Parallel shank fixing for end thrust

适用范围：Dimensions and tolerances of resistance spot welding electrode holders (type C) without offset and with a facility for cable clamping.

EN 28430-2-1992

Resistance spot welding - Electrode holders - Part 2: Morse taper fixing (ISO 8430-2:1988)

发布日期：1992-05-27  实施日期：1992-05-27

DIN EN ISO 17677-1-2010

电阻焊 词汇 第1部分:点焊、凸焊和缝焊

Resistance welding - Vocabulary - Part 1: Spot, projection and seam welding

适用范围：This International Standard specifies terms and definitions for resistance spot, projection and seam welding. Additionally, all times which can be set with a controller will be dealt with as such.

实施日期：2010-01-01

SJ/T 31220-1994

TY型、PC型点焊机完好要求和检查评定方法

EN ISO 14329-2003

Resistance welding Destructive tests of welds Failure types and geometric measurements for resistance spot,seam and projection welds ISO 14329:2003

实施日期：2003-07-17

JB/T 10256.2-2001

电阻点焊——电极握杆 第2部分：莫氏锥度配合

Resistance spot welding-Electrode holders Part 2:Morse taper fixing

适用范围：　　本标准规定了同轴且具有电缆夹紧结构的电阻点焊电极握杆(B型)的尺寸和容差。利用其莫氏锥柄直接把握杆固定在多点焊设备焊接工作缸上。

实施日期：2001-10-01

EN ISO 18278-1-2004

Resistance welding. Weldability. Part 1:Assessment of weldability for resistance spot,seam and projection welding of metallic materials ISO 18278-1:2004

实施日期：2004-11-01

BS 1140-1993

有镀层和无镀层低碳钢电阻点焊规范

Specification for resistance spot welding of uncoated and coated low carbon steel

适用范围：Specifies procedures in the fabrication of assemblies of uncoated and coated low carbon steel comprising two or three thicknesses of metal where the single sheet thickness is within certain given limit...

实施日期：1993-05-15

JB/T 10256.1-2001

电阻点焊——电极握杆第1部分：配合锥度1：10

Resistance spot welding-Electrode holders Part1:Taper fixing 1:10

适用范围：　　本标准规定了同轴且具有电缆夹紧结构的电阻点焊电极握杆(A型)的尺寸和容差。利用其1:10锥度的圆锥柄直接把握杆固定在多点焊设备焊接工作缸上。

实施日期：2001-10-01

EN ISO 14323-2006

Resistance spot welding and projection welds. Destructive testing of welds. Specimen dimensions and procedure for impact shear test and cross-tension testing ISO 14323:2006

实施日期：2006-05-01

DIN EN ISO 8166-2003

电阻焊 以恒定机器设置对点焊条寿命的评估程序

Resistance welding - Procedure for the evaluation of the life of spot welding electrodes using constant machine settings

适用范围：This standard specifies a procedure to be used for the evaluation of the life of spot welding electrodes when welding uncoated and coated steels, stainless steels, aluminium and aluminium alloys using ...

EN ISO 5183-2-2001

Resistance Spot Welding. Electrode Adaptors,Male Taper 1:10. Part 2:Parallel Shank Fixing for End-Thrust Electrodes ISO 5183-2:2000;Supersedes EN 25183-2:1991

实施日期：2001-10-01

DIN EN 25822-1992

点焊设备.圆锥塞规和环规

Spot welding equipment; taper plug gauges and taper ring gauges (ISO 5822:1988); german version EN 25822:1991

JIS Z3140-1989

点焊区的检查方法

Method of inspection for spot weld