GB/T 3524-2015

碳素结构钢和低合金结构钢热轧钢带

Hot-rolled carbon and low alloy structural steel strips

适用范围：本标准规定了碳素结构钢和低合金结构钢热轧钢带的分类和代号、订货内容、尺寸、外形、重量及允许偏差、技术要求、试验方法、验收规则、包装、标志和质量证明书等规定。 本标准适用于厚度不大于12.00 mm、宽度不大于600 mm的碳素结...

发布日期：2015-09-11  实施日期：2016-06-01

BS 4486-1980

混凝土预加应力用热轧和热轧并处理的高抗拉强度的合金钢筋规范

Specification for hot rolled and hot rolled and processed high tensile alloy steel bars for the prestressing of concrete

适用范围：Requirements for preferred sizes for smooth or ribbed alloy steel bars in straight lengths supplied in either hot rolled or hot rolled and processed conditions. Two nominal strength levels, 835 N/mm<UP...

DIN EN 13480-8-2007

Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping

实施日期：2007-06-01

CNS 567-1956

热作铆钉

Hot headed rivet

CNS 8532-1999

耐热压烫染色坚牢度试验法

Method of test for colour fastness to hot pressing

发布日期：1982-02-19  实施日期：1999-10-29

DIN EN 10221-1996

热轧棒材的表面质量等级.交货技术条件

Surface quality classes for hot-rolled round bars and rods - Technical delivery conditions; German version EN 10221:1995

适用范围：The document specifies the requirements for the surface quality of hot rolled round bars and wire rod with nominal diameters of 5 mm <kleiner => d<(Index)N> <kleiner => 120 mm.

GB/T 701-2008

低碳钢热轧圆盘条

Hot rolled low carbon steel wire rods

适用范围：本标准规定了低碳钢热轧圆盘条的订货内容、尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则和包装、标志及质量证明书。　　本标准适用于供拉丝等深加工及其他一般用途的低碳钢热轧圆盘条。　　本标准不适用于以下产品:　...

发布日期：2008-08-05  实施日期：2009-04-01

NF A45-255-1983

热轧材 UaP 型钢（平行宽缘的）

Iron and steel. Parallel flange channel sections (UAP-sections).

实施日期：1983-11-01

GB/T 9788-1988

热轧不等边角钢 尺寸、外形、重量及允许偏差

Hot-rolled unequal-leg angle steel--Dimensions,shape,weight and tolerances

实施日期：1989-06-30

NF E88-051-2010

Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals.

GB/T 21471-2008

锤上钢质自由锻件机械加工余量与公差 轴类

Machining allowances and tolerances for steel open die forgings on hammer - Shafts

适用范围：本标准规定了光轴、台阶轴和单拐曲轴类自由锻件的机械加工余量与公差，以及黑皮锻件的允许极限偏差。　　本标准适用于含碳量不超过0.9%和其他合金成分总含量不超过4%的碳素钢和合金钢的自由锻件。　　凡超越本标准规定范围的自...

发布日期：2008-02-28  实施日期：2008-08-01

EN 746-4-2000

工业加热设备.第4部分:热镀锌用加热设备的特殊要求

Industrial Thermoprocessing Equipment. Part 4:Particular Safety Requirements for Hot Dip Galvanizing Thermoprocessing Equipment

实施日期：2000-01-01

GB/T 1239.4-1989

热卷圆柱螺旋弹簧技术条件

Hot coiled helical springs--Technical specifications

发布日期：1989-03-02  实施日期：1990-01-01

GB 5681-1985

压力容器用热轧钢带

Hot-rolled steel strips for pressure vessels

GB 3193-1982

铝及铝合金热轧板

实施日期：1983-06-01

GB/T 233-1982

金属顶锻试验方法

Method for forging test of metals

DIN EN 10163-3-2005

热轧钢材表面特性的交货条件(钢板、宽扁钢和型钢) 第3部分:型材

Technical delivery conditions for the surface condition of hot rolled steel plate, wide flats and sections; part 3: sections

适用范围：This part 3 in addition to part 1 of this European Standard specifies the delivery requirements for surface condition of sections and applies to all surfaces excluding edges.

DIN EN 13906-2-2002

圆线材和棒制圆柱形螺旋弹簧.计算和设计.第2部分:拉伸弹簧

Cylindrical helical springs made from round wire and bar - Calculation and design - Part 2: Extension springs; German version EN 13906-2:2001

适用范围：The document applies to the calculation and design of cold and hot coiled helical cylindrical extension springs made from round wire and bar loaded in the direction of the spring axis and operating at ...

BS EN 13906-1-2002

圆形金属丝和棒材制柱形螺旋弹簧 计算和设计 第1部分:压缩弹簧

Zylindrische Schraubenfedern aus runden Draehten und Staeben. Berechnung und Konstruktion. Druckfedern Cylindrical Helical Springs Made from Round Wire and Bar-Calculation and Design-Part 1:Compression...

适用范围：This standard specifies the calculation and design of cylindrical helical compression springs with a linear characteristic, made from round wire and bar of constant diameter with values according to Ta...

实施日期：2002-04-18

NF A49-502-2-2006

Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2 : tolerances, dimensions and sectional properties.