EN 438-1-2005

贴面板 热固性树脂板 第1部分: 导言和一般信息

High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (Usually called Laminates). Part 1:Introduction and general information

实施日期：2005-01-01

EN ISO 11357-1-2009

Plastics. Differential scanning calorimetry (DSC). Part 1:General principles

实施日期：2009-10-01

NF T54-301-4-2005

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually caused laminates) - Part 4 : classification and specifications for compact laminates of thickness 2 mm and greater.

NF C26-182-1994

Specification for industrial rigide laminated sheets based on thermosetting resins for electrical purposes - Part 2 : methods of test.

BS EN 438-5-2005

装饰用高压层压板材(HPL).基于热固性树脂的薄板材(通常称为层压板材).用于粘结支撑基质的厚度不足2毫米的楼板级层压板材的分类和规范

Dekorative Hochdruck-Schichtpressstoffplatten (HPL). Platten auf Basis haertbarer Harze (Schichtpressstoffe). Klassifizierung und Spezifikationen fuer Schichtpressstoffe fuer Fussboeden mit einer Dicke...

适用范围：This Part of EN 438 applies to five classes of flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates, to produce HPL flooring elements. For laminate floor covering...

实施日期：2005-07-26

ISO 11357-7-2002

塑料 差示扫描量热法(DSC) 第7部分:结晶动力学的测定

Plastics -- Differential scanning calorimetry (DSC) -- Part 7: Determination of crystallization kinetics

适用范围：Scope This part of ISO 11357 specifies two methods, isothermal and non-isothermal, for studying the crystallization kinetics of partially crystalline polymers using differential scanning calorimetry (D...

发布日期：2002-05-01  实施日期：2002-05-01

DIN EN 1842-1997

塑料.热固模塑料(SMC-BMC).压铸模收缩率的测定

Plastics - Thermoset moulding compounds (SMC - BMC) - Determination of compression moulding shrinkage; German version EN 1842:1997

适用范围：The document specifies a method to determine the moulding shrinkage of compression moulded test specimens of thermosetting materials. It applies only to materials which exhibit no post-shrinkage after ...

BS EN 60454-3-4-2007

电气用途的压力敏感胶粘带规范.单独材料规范.纤维素纸,皱纹.橡胶,热固胶粘带

Selbstklebende B?nder für elektrotechnische Anwendungen. Bestimmungen für einzelne Materialien. B?nder aus gekrepptem und nicht gekrepptem Zellulosepapier mit warmh?rtendem Kautschuk-Klebstoff Pressure...

适用范围：This sheet of IEC 60454-3 contains the requirements for pressure-sensitive adhesive tapesmade with cellulose paper, creped and non-creped, with rubber thermosetting adhesive.Materials, which conform to...

实施日期：2007-08-31

EN 438-9-2010

High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (Usually called Laminates). Part 9:Classification and specifications for alternative core laminates

实施日期：2010-06-01

DIN EN ISO 11357-1-2010

塑料 差示扫描量热法(DSC) 第1部分:通则

Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles

适用范围：This part of the standard specifies several differential scanning calorimetry (DSC) methods for the thermal analysis of polymers and polymer blends, such as - thermoplastics (polymers, moulding compoun...

实施日期：2010-03-01

NF C26-148-8-2006

Pressure-sensitive adhesive tapes for electrical purposes - Part 3 : specifications for individual materials - Sheet 8 : woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre.

ISO 11357-2-2013

塑料 差示扫描量热法(DSC) 第2部分:玻璃化转变温度的测定

Plastics -- Differential scanning calorimetry (DSC) -- Part 2: Determination of glass transition temperature and glass transition step height

适用范围：ISO 11357-2:2013 specifies methods for the determination of the glass transition temperature and the step height related to the glass transition of amorphous and partially crystalline plastics.

发布日期：2013-05-01  实施日期：2013-05-01

ISO 4586-1-2004

装饰用高压层压板 热固性树脂薄板 第1部分:分类和规范

High-pressure decorative laminates -- Sheets made from thermosetting resins -- Part 1: Classification and specifications

适用范围：ISO 4586-1:2004 establishes a classification system for high-pressure decorative laminated sheets according to their performance and main recommended fields of application, including materials with spe...

发布日期：2004-11-01  实施日期：2004-11-01

IEC 60893-2-2003

电工用热固性树脂工业硬质层压板 第2部分:试验方法

Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test

适用范围：Describes methods of test for the materials defined in IEC 60893-1 (referred to also as Part 1).

发布日期：2003-06-24  实施日期：2003-06-24

BS EN 60893-2-2004

电工用热固性树脂基工业刚性层压板规范.试验方法

Isolierstoffe. Tafeln aus technischen Schichtpressstoffen auf der Basis warmehaertender Harze fuer elektrotechnische Zwecke. Pruefverfahren Insulating materials Industrial rigid laminated sheets based ...

适用范围：This part of IEC 60893 describes methods of test for the materials defined in IEC 60893-1 (referred to also as Part 1).

实施日期：2004-08-11

BS EN 60893-3-1-2004

电工用热固性树脂基工业刚性层压板规范.第3部分:专用材料规范.第1活页:工业刚性层压板

Isolierstoffe. Tafeln aus technischen Schichtpressstoffen auf der Basis warmhaertender Harze fuer elektrotechnische Zwecke. Bestimmungen fuer einzelne Werkstoffe. Anforderungen fuer Typen von Tafeln au...

适用范围：This part of IEC 60893 is intended as a guide giving the requirements for various materials. Their properties are given in subsequent Part 3 specification sheets. Materials which conform to this specif...

实施日期：2004-02-26

IEC 60454-3-4-2007

电工用压敏粘带 第3部分:单项材料规范 活页4:涂橡胶热固性粘合剂的纤维素皱纹纸

Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Cellulose paper, creped and non-creped, with rubber thermosetting adhesive

适用范围：IEC 60454-3-4:2007 contains the requirements for pressure-sensitive adhesive tapes made with cellulose paper, creped and non-creped, with rubber thermosetting adhesive. Materials, which conform to this...

发布日期：2007-06-05  实施日期：2007-06-05

UL 2515-2009

UL Standard for Safety Aboveground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings First Edition

实施日期：2009-07-31

NF T30-499-6-2011

Coating powders - Part 6 : determination of gel time of thermosetting coating powders at a given temperature.

ISO/TR 10465-2-2007

挠性玻璃增强的不饱和聚酯树脂管(GRP-UP)的地下安装 第2部分:静态计算方法的比较

Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) -- Part 2: Comparison of static calculation methods

适用范围：ISO/TR 10465-2:2007 presents a comparison of the ATV and AWWA methods for static calculations on underground GRP pipe installations. It is intended that this comparison will encourage the use of both p...

发布日期：2007-09-01  实施日期：2007-09-01