NF C32-011-401-2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 401 : miscellaneous tests - Thermal ageing methods - Ageing in an air oven.

JIS K7224-1996

高吸水性树脂的吸水速度试验方法

Testing method for water absorption rate of super absorbent polymers

ISO 2505-2005

热塑性塑料管 纵向回缩 试验方法和参数

Thermoplastics pipes -- Longitudinal reversion -- Test method and parameters

发布日期：2005-05-01  实施日期：2005-05-01

BS EN 13575-2012

Static thermoplastic tanks for the above ground storage of chemicals. Blow moulded or rotationally moulded polyethylene tanks. Requirements and test methods

发布日期：2012-05-31 

DIN EN 438-2-2005

贴面板 热固性树脂板 第2部分:性能测定

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties

BS ISO 13775-2-2000

汽车用热塑管和软管.非燃料应用.石油基质燃料应用

Kunststoffschlaeuche mit und ohne Einlage fuer die Verwendung an Kraftfahrzeugen. Anwendungen fuer Kraftstoffe auf der Basis von Erdoel Thermoplastic Tubing and Hoses for Automotive Use-Part 2:Petroleu...

实施日期：2000-04-15

DIN EN ISO 11357-3-2013

Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2011); German version EN ISO 11357-3:2013

实施日期：2013-04-01

DIN EN 13677-1-2003

增强热塑模制材料 GMT规范 第1部分:标记

Reinforced thermoplastic moulding compounds - Specification for GMT - Part 1: Designation

DIN EN ISO 2114-2002

塑料(聚酯树脂)和油漆及清漆(粘接剂).部分酸值和总酸值的测定

Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value

发布日期：2006-11-01  实施日期：2006-11-01

GB/T 532-2008

硫化橡胶或热塑性橡胶与织物粘合强度的测定

Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabric

发布日期：2008-06-04  实施日期：2008-12-01

EN ISO 899-1-2003

Plastics. Determination of creep behaviour. Part 1:Tensile creep ISO 899-1:2003

实施日期：2003-06-01

EN 13100-1-1999

Non Destructive Testing of Welded Joints of Thermoplastics Semi-Finished Products. Part 1:Visual Examination

实施日期：1999-11-01

GB/T 9870.2-2008

硫化橡胶或热塑性橡胶动态性能的测定 第2部分：低频扭摆法

Rubber,vulcanized or thermoplastic—Determination of dynamic properties—Part 2:Torsion pendulum methods at low frequencies

发布日期：2008-06-04  实施日期：2008-12-01

DIN EN 714-1994

塑料管道系统.压力管与模塑配件的合成橡胶密封环型接合;在无轴向推力时内部流体静力压;力下密封试验

Thermoplastics piping systems - Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings - Test method for leaktightness under internal hydrostatic pressure...

DIN EN ISO 6603-2-2002

塑料.刚性塑料刺穿冲击性能的测定.第2部分:仪器法

Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test

DIN 16869-2-1995

离心浇注的玻璃纤维增强聚酯树脂管.第2部分:一般质量要求、检验

Centrifugally cast filled glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 2: General quality requirements, testing

EN ISO 16135-2006

Industrial Valves. Ball Valves of Thermoplastic Materials ISO 16135:2006

实施日期：2006-03-01

DIN EN 1847-2010

Flexible sheets for waterproofing - Plastics and rubber sheets for roof waterproofing - Methods for exposure to liquid chemicals, including water

实施日期：2010-04-01

DIN EN ISO 3167-2003

塑料 多用途试验试样

Plastics - Multipurpose-test specimens

BS EN 12877-2-2000

塑料中的染色材料.塑料中染色材料在处理过程中颜色的热稳定性测定.喷射模塑测定法

Farbmittel in Kunststoffen. Bestimmung der Bestaendigkeit der Farbe gegen Hitze beim Verarbeiten von Farbmitteln in Kunststoffen. Bestimmung durch Spritzgiessen Colouring Materials in Plastics-Determin...

实施日期：2000-01-15