BS 2HR 51-2010

Specification for high expansion heat-resisting steel billets,bars,forgings and parts (Ni 25.5,Cr 15,Ti 2,Mn 1.5,Mo 1.25,Si 0.7,V 0.3) (Solution treated at 980 Degree C)

实施日期：2010-01-31

DIN EN 10083-3-2007

Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels

实施日期：2009-01-01

DIN EN ISO 2320-2009

有效力矩型钢螺母 机械和工作性能

Prevailing torque type steel nuts - Mechanical and performance properties

适用范围：This International Standard specifies the mechanical and performance properties for prevailing torque typesteel nuts when tested at an ambient temperature range of +10 ~C to +35 ~C. It includes a singl...

实施日期：2009-03-01

DIN EN 10132-1-2000

热处理用冷轧窄钢带.交货技术条件.第1部分:通则

Cold-rolled narrow steel strip for heat-treatment - Technical delivery conditions - Part 1: General; German version EN 10132-1:2000

适用范围：The document contains technical delivery conditions f?cold-rolled narrow steel strip for heat.

HB/Z 327-1998

磁滞合金热处理工艺说明书

适用范围：本标准规定了磁滞合金热处理设备、工艺和质量控制的要求。 　　本标准适用于铁钴钒系和铁钼系合金及其制件的热处理。

发布日期：1999-01-06  实施日期：1999-03-01

GB/T 17358-1998

热处理生产电耗定额及其计算和测定方法

Power consumption quota and its counting and testing method in heat treating production

实施日期：1998-12-01

BS T 72-T 73-1977

Specifications for 18/10 chromium-nickel corrosion-resisting steel tube for hydraulic purposes (niobium/titanium stabilized: 550 MPa)

BS 1900-1976

二次基准温度计规范

Sekundaerbezugsthermometer Specification for Secondary reference thermometers Thermomètres-etalons secondaires AMD 4883:September,1985

适用范围：Series of 29 total immersion thermometers for checking the accuracy of other thermometers in the range -80<deg>C to 505<deg>C. Materials, essential dimensions, graduation and figuring. Appendices: ther...

实施日期：1976-12-31

DIN EN 3474-2006

航空和航天 铝合金AL-P2024-T81 铝板和铝带 0.25 mm ≤ a ≤ 6 mm

Aerospace series - Aluminium alloy AL- P2024-T81 - Sheet and strip - 0.25 mm <= a <= 6 mm

适用范围：This standard specifies the requirements relating to: Aluminium alloy AL-P2024-T81 - Sheet and strip - 0,25 mm <kleiner => a <kleiner => 6 mm for aerospace applications.#,,#

实施日期：2006-06-01

GB/T 225-2006

钢 淬透性的末端淬火试验方法（Jominy 试验）

Steel - Hardenability test by end quenching（Jominy test）

适用范围：本标准规定了用末端淬火试验方法（Jominy 试验）测定钢的淬透性，试验时采用直径为25mm，长为100mm的试样。注:通过协商，对某一规定的应用范围，可采用已认可的数学模型(见附录C)进行Jominy曲线计算来替代本标准中所叙述的末...

发布日期：2006-11-01  实施日期：2007-02-01

BS 2L 77-1971

Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)

EN 10052-1993

Vocabulary of Heat Treatment Terms for Ferrous Products

实施日期：1993-01-01

JB/T 7161-2011

凿岩机械与气动工具 热处理件通用技术条件

General specification of heat-treatment for rock drilling machines and pneumatic tools

适用范围：本标准规定了凿岩机械与气动工具热处理件的技术要求、检验规则和检验方法。本标准适用于凿岩机械与气动工具热处理零件(不包括有色金属及粉未治金热处理零件)。在产品图样或技术文件无特殊要求时，应按本标准执行。

发布日期：2011-05-18  实施日期：2011-08-01

DIN EN 10087-1999

自由切削钢.半成品和热轧杆棒的交货技术条件

Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods; German version EN 10087:1998

EN 746-5-2000

工业热处理设备.第5部分:盐浴热处理设备的特殊安全要求

Industrial Thermoprocessing Equipment. Part 5:Particular Safety Requirements for Salt Bath Thermoprocessing Equipment

实施日期：2000-09-01

BS 2HR 205-2009

Gegluehtes Band und Blech aus Nickel-Kupfer-Legierung auf Nickelbasis (Cu 31) Specification for nickel-copper alloy sheet and strip:annealed (Nickel base,Cu 31) T?les et feuillards en alliages nickel-cuivre. l'état recuit (base de nickel,Cu 31). Spécifications

实施日期：2009-11-30

DIN EN 2511-2006

航空和航天 铝合金AL-P7075-T7351 铝板 6 mm < a ≤ 100 mm

Aerospace series - Aluminium alloy AL-P7075-T7351 - Plate - 6 mm < a <= 100 mm

适用范围：This standard specifies the requirements relating to: Aluminium alloy AL-P7075-T7351 - Plate - 6 mm <kleiner> a <kleiner => 100 mm for aerospace applications.

实施日期：2006-06-01

BS 876-1995

手锤规范

Hand Hammers AMD 9199;December 1996;

适用范围：Specifies the quality and dimensions of hammers of the following types, together with the dimensions of the handles where appropriate. Joiners' (or Warrington) hammers, engineers' ball pein hammers, en...

实施日期：1995-01-01

DIN 53436-5-2003

气流和毒性试验中材料热分解产物的产生 第5部分:毒性计算测定方法

Producing thermal decomposition products from materials in an air stream and their toxicological testing - Part 5: Method to calculate the toxicity

适用范围：In this standard mathematical models are been described, which allow an approximation of the acute inhalation toxicity of smoke gas products on the basis of analytically determined equilibrium concentr...

HB 7750-2004

钛合金零件真空热处理

Vacuum heat treatment of titanium alloy parts

适用范围：本标准规定了钛合金零（组）件真空热处理的设备及工艺材料、热处理工艺、工艺要求、质量控制与检验和技术安全等内容。 本标准适用于钛合金零（组）件的真空热处理，包括退火、去应力退火、除氢退火、固溶处理和时效等。钛合金半成品...

发布日期：2004-09-01  实施日期：2004-12-01