EN ISO 10545-8-1996

Ceramic Tiles. Part 8:Determination of Linear Thermal Expansion Supersedes EN 103:1991;ISO 10545-8:1994

实施日期：1996-08-01

ASTM D1405/D1405M-2008(2013)

Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

实施日期：2008-12-01

BS EN ISO 11403-3-2001

塑料 可比较多点数据的采集和表述 第3部分:环境对特性的影响

Plastics-Acquisition and Presentation of Comparable Multipoint Data-Part 3:Environmental Influence on Properties

适用范围：This part of ISO 11403 specifies test procedures for the acquisition and presentation of multipoint data which demonstrate the behaviour of plastics under the following environments: — prolonged expos...

实施日期：2001-01-01

FZ/T 01082-1999

服装面料和热熔粘合衬干热尺寸变化的测定

Determination of heat dimensional change for textile and fusible interlinings ...

实施日期：1999-02-01

BS 5131-1.7-1991

Pruefung von Schuhwerk und Schuhwerkstoffen. Klebstoffe. Herstellung von Probekoerpern zur Pruefung der Waermebestaendigkeit und des Schaelwiderstandes von Schmelzklebstoffen Methods of Test for Footwear and Footwear Materials-Part 1:Adhesives-Section 1.7:Preparation of Test Assemblies Using Hot Melt Adhesives for Heat Resistance (Creep) and Peel Tests Methodes d'essais des chaussures et materiaux pour chaussures. Colles. Preparation des assemblages d'essai. l'aide de colles thermofusibles autoa

实施日期：1991-07-30

GB/T 4893.3-1985

家具表面漆膜耐干热测定法

实施日期：1985-04-01

IEC 60317-57-2010

特种绕组线规范 第57部分:220级聚酰胺-酰亚胺漆包圆铜线

Specifications for particular types of winding wires - Part 57: Polyamide-imide enameled round copper wire, class 220

适用范围：IEC 60317-57:2010 specifies the requirements of an enamelled round copper winding wire of class 220 with a sole coating based on polyamide-imide resin, which may be modified providing it retains the ch...

发布日期：2010-08-06  实施日期：2010-08-06

BS EN 60068-2-44-1995

环境试验.第2部分:试验方法.第44节:试验T指南:锡焊

Umweltpruefungen. Pruefungen. Leitfaden fuer die Pruefungen T:Loeten Environmental Testing Part 2:Tests Guidance on Test T. Soldering (IEC 68-2-44:1995) (G) Essais d'environment. Essais. Guide pour l'e...

适用范围：Provides background information and recommendations for writers of specifications containing references to standards relating to soldering and solderability.

实施日期：1995-01-01

NF C20-401-1999

Environment testing. Part 3 : background information. Section 1 : cold and dry heat tests.

BS EN 45502-1-1998

活性可植入医疗装置.制造商提供的安全,标记和信息的一般要求

Aktive implantierbare medizinische Geraete. Allgemeine Festlegungen fuer die Sicherheit,Aufschriften und vom Hersteller zur Verfuegung zu stellende Informationen Active Implantable Medical Devices Part...

适用范围：This Part 1 of EN 45502 specifies requirements that are generally applicable to ACTIVE IMPLANTABLE MEDICAL DEVICES. For particular types of ACTIVE IMPLANTABLE MEDICAL DEVICES, these essential requireme...

实施日期：1998-02-15

GB/T 2423.50-2012

环境试验 第2部分：试验方法 试验Cy: 恒定湿热 主要用于元件的加速试验

Environmental testing - Part 2: Test methods - Test Cy: Damp heat，steady state，accelerated test primarily intended for components

适用范围：本试验不适用于评价诸如腐蚀和变形等外部效应。

发布日期：2012-11-05  实施日期：2013-02-01

EN 60068-2-39-1999

环境试验.第2部分:试验.试验Z/修改件:混合连续冷却,低气压和湿热试验

Environmental Testing - Part 2: Tests - Test Z/AMD: Combined Sequential Cold, Low Air Pressure and Damp Heat Test [Superseded: CENELEC HD 323.2.39 S1]

发布日期：1999-04-01  实施日期：1999-04-01

DIN 53436-5-2003

气流和毒性试验中材料热分解产物的产生 第5部分:毒性计算测定方法

Producing thermal decomposition products from materials in an air stream and their toxicological testing - Part 5: Method to calculate the toxicity

适用范围：In this standard mathematical models are been described, which allow an approximation of the acute inhalation toxicity of smoke gas products on the basis of analytically determined equilibrium concentr...

BS EN 60512-11-12-2002

电子设备连接器 试验和测量 第11-12部分:气候试验 试验11m:湿热,循环

Steckverbinder fuer elektronische Einrichtungen. Mess-und Pruefverfahren. Klimatische Pruefungen. Pruefung 11m. Feuchte Waerme,zyklisch Connectors for Electronic Equipment-Tests and Measurements-Part 1...

适用范围：This part of IEC 60512, when required by the detail specification, is used for testing electromechanical components within the scope of IEC technical committee 48. This test may also be used for simila...

实施日期：2002-05-29

BS 4618-3.2-1973

Empfehlungen fuer die Darstellung von Kunststoffkonstruktionsdaten. Thermische Eigenschaften. Enthalpie Recommendations for the Presentation of Plastics Design Data-Part 3:Thermal Properties-Section 3.2:Heat Content Recommandations pour la presentation des donnees de conception des plastiques. Proprietes thermiques. Enthalpie

实施日期：1973-10-15

BS 5733-2010

Allgemeine Anforderungen fuer Elektrozubehoer General requirements for electrical accessories. Specification Specification des prescriptions generales des accessoires electriques.

实施日期：2010-07-31

NF E31-356/IN1-2008

Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 oC.

DIN ISO 7991-1998

玻璃.热平均线膨胀系数的测定

Glass - Determination of coefficient of mean linear thermal expansion (ISO 7991:1987)

适用范围：The document specifies a method for determination the coeffecient of mean linear thermal expansion of glass in the elastic, solid-like state well below the transformation temperatur (see DIN ISO 7884-8...

IEC/TS 60034-18-41-2006

Rotating electrical machines. Part 18-41:Qualification and type tests for Type I electrical insulation systems used in rotating electrical machines fed from voltage converters Machines électriques tournantes. Partie 18-41:Qualification et essais de type des systèmes d’isolation de type I utilisés dans des machines alimentées par convertisseurs de tension Edition 1

实施日期：2006-10-01

EN ISO 19712-2-2013

实心表面处理用装饰材料 第2部分:薄板材性能的测定

Plastics. Decorative solid surfacing materials. Part 2:Determination of properties. Sheet goods

实施日期：2013-01-01