ISO 8302-1991

绝热 稳态热阻及有关特性的测定 防护热板法

Thermal insulation -- Determination of steady-state thermal resistance and related properties -- Guarded hot plate apparatus

适用范围：Defines the use of the guarded hot plate method to measure the steady-state heat transfer through flat slab specimens and the calculation of its heat transfer properties. Annex A forms an integral part...

发布日期：1991-07-31  实施日期：1991-07-31

GB 4412-1984

机械化水泥立窑热工测量方法

Methods for heat-measuring of mechanical cement shaft kilns

ISO 8301-1991

绝热 稳态热阻剂有关特性的测定 热流计法

Thermal insulation -- Determination of steady-state thermal resistance and related properties -- Heat flow meter apparatus

适用范围：Defines the use of the heat flow meter method to measure the steady-state heat transfer through flat slab specimens and the calculation of its heat transfer properties. Annex A forms an integral part o...

发布日期：1991-07-31  实施日期：1991-07-31

EN 1434-5-2007

Heat meters. Part 5:Initial verification tests

实施日期：2007-02-01

BS EN 27841-1991

自动汽水分离器蒸汽损失的测定方法

Kondensatableiter. Bestimmung des Dampfverlustes. Pruefverfahren Methods for Determination of Steam Loss of Automatic Steam Traps (ISO 7841:1988) Purgeurs automatiques de vapeur d'eau. Determination de...

适用范围：This International Standard specifies two test methods to determine the steam loss of automatic steam traps to ISO 6552. The object of these tests is to determine the amount of live steam, if any, that...

实施日期：1991-01-01

BS 791-1990

固体杆式量热用温度计规范

Kalorimeter-Thermometer in Stabform Solid-stem calorimeter thermometers Thermomètres sur tige pour calorimètres. Specifications

适用范围：Requirements for a series of short-range thermometers for bomb calorimetry and for where an accurate measurement of temperature changes is needed.

实施日期：1990-04-29

EN 60034-29-2008

Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise [Superseded: CENELEC EN 61986]

DIN EN 12664-2001

建材及其制品的热性能.通过护热板和热流计测定方法确定耐热性能.中等和低耐热的干和湿的制品

Building materials - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products with medium and low thermal resistance

GB/T 21162-2007

顺流粮食干燥机单位耗热量与处理量折算规则

Conversion rule for specific heat consumption and throughput of concurrent - Flow grain dryer

适用范围：本标准规定了用于顺流粮食干燥机的单位耗热量与处理量的术语和符号、标准条件、现场试验条件、折算系数表和折算方法。　　本标准规定的系数适用于3级以上连续式顺流粮食干燥机在不同条件下干燥玉米、水稻和小麦过程中的单位耗...

发布日期：2007-11-01  实施日期：2008-01-01

ASTM E1125-2010

用光谱图表校准初级非聚光式陆地光伏参考电池的试验方法

Standard Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum

实施日期：2010-06-01

BS EN 60034-2-1999

旋转电机.往复式内燃机(RIC)引擎驱动发电装置交流发电机

Drehende elektrische Maschinen. Verfahren zur Bestimmung der Verluste und des Wirkungsgrades von drehenden elektrischen Maschinen aus Pruefungen (ausgenommen Maschinen fuer Schienen-und Strassenfahrzeu...

适用范围：This Recommendation applies to d.c. machines and to a.c. synchronous and induction machines of all sizes within the scope of IEC Publication 34-1. The principles can, however, be applied to other types...

实施日期：1999-10-15

CNS 2632-1966

煤气发热量测定法

Method of Test for Calorific Value of Coal Gas

发布日期：1966-09-17  实施日期：1966-09-17

GB/T 22232-2008

化学物质的热稳定性测定 差示扫描量热法

Test method for the thermal stability of chemicals by differential scanning calorimetry

适用范围：本标准适用于用最小数量的材料测定一个试样的焓变化，估计发生焓变化的温度，并通过差示扫描量热或压力差示扫描量热方法确定它们的焓(热)。　　本测试方法可对固体、液体或泥浆样品进行测定。　　本测试方法可在绝对压力范围10...

发布日期：2008-06-19  实施日期：2009-02-01

BS EN 12664-2001

建筑材料和产品的热性能 通过保护热板和热流计的方法测定热阻 中和低热阻的干和湿产品

Waermetechnisches Verhalten von Baustoffen und Bauprodukten. Bestimmung des Waermedurchlasswiderstandes nach dem Verfahren mit dem Plattengeraet und dem Waermestrommessplatten-Geraet. Trockene und feuc...

适用范围：This European Standard defines minimum structural requirements for railway vehicle bodies. This European Standard specifies the loads vehicle bodies shall be capable of sustaining, identifies how mater...

实施日期：2001-03-15

DIN EN 60034-2-2-2010

旋转电机 第2-2部分:从试验测定大型机器分离损耗的特殊方法 IEC 60034-2-1的补充

Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1 (IEC 60034-2-2:2010); German version EN 60034-2-2:20...

实施日期：2010-10-01

NF E17-401-3-2009

Heat meters - Part 3 : data exchange and interfaces.

ISO 22768-2006

生橡胶 用差示扫描量热法确定玻璃态转变温度

Rubber, raw -- Determination of the glass transition temperature by differential scanning calorimetry (DSC)

适用范围：ISO 22768:2006 specifies a method using a differential scanning calorimeter to determine the glass transition temperature of raw rubber.

发布日期：2006-07-01  实施日期：2006-07-01

DIN EN 60034-29-2009

旋转电机 第29部分:等效负载和叠加技术 测定温升的间接试验

Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise

实施日期：2009-01-01

EN ISO 11357-3-2013

塑料 差示扫描量热法(DSC) 第3部分:熔融和结晶温度及热焓的测定

Plastics. Differential scanning calorimetry (DSC). Part 3:Determination of temperature and enthalpy of melting and crystallization

实施日期：2013-01-01

EN 1934-1998

Thermal Performance of Buildings. Determination of Thermal Resistance by Hot Box Method Using Heat Flow Meter. Masonry

实施日期：1998-03-01