DIN EN 3723-1996

航空和航天.耐热钢FE-PA92HT,MOS2镀层自锁六角螺母.等级:1100MPa(大气温度)/425℃

Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 <Grad>C; German version EN 3723:...

BS EN 60068-2-44-1995

环境试验.第2部分:试验方法.第44节:试验T指南:锡焊

Umweltpruefungen. Pruefungen. Leitfaden fuer die Pruefungen T:Loeten Environmental Testing Part 2:Tests Guidance on Test T. Soldering (IEC 68-2-44:1995) (G) Essais d'environment. Essais. Guide pour l'e...

适用范围：Provides background information and recommendations for writers of specifications containing references to standards relating to soldering and solderability.

实施日期：1995-01-01

BS EN 343-2003+A1-2007

Protective clothing. Protection against rain

实施日期：2003-09-04

EN 14320-1-2013

建筑设备与工业装置用隔热产品 就地形成喷涂硬质聚氨酯(PUR)和聚异氰脲酯(PIR)泡沫产品 第1部分:安装前的硬质泡沫喷射系统的规范

Thermal insulating products for building equipment and industrial installations. In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products. Part 1:Specification for the r...

实施日期：2013-01-01

EN 15599-2-2010

Thermal insulation products for building equipment and industrial installations. In-situ thermal insulation formed from expanded perlite (EP) products. Part 2:Specification for the installed products

实施日期：2010-07-01

GB/T 10294-1988

绝热材料稳态热阻及有关特性的测定 防护热板法

Thermal insulation--Determination of steady-state thermal resistance and related properties--Guarded hot plate apparatus

适用范围：本标准规定了使用防护热板装置测定板状试件稳态热性质的方法和对装置的要求。本方法只适用于测定干燥试件，试件的热阻应大于O.1m².K/W，试件的热阻可以低到0.02 m²K/W，但不能在全部范围内得到前述...

发布日期：1988-12-30  实施日期：1989-10-01

ASTM C1114-2006

使用薄加热器设备的稳态热传输性能的试验方法

Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus

实施日期：2006-11-01

IEC 61196-1-318-2008

同轴通信电缆 第1-318部分:机械试验方法 热性能试验

Coaxial communication cables - Part 1-318: Mechanical test methods - Heat performance tests

适用范围：Applies to coaxial communication cables. It specifies several test methods for determining: - heat flow resistance of dielectric (the resistance of the dielectric to the mechanical distortion induced b...

发布日期：2008-02-12  实施日期：2008-02-12

NF P92-130-6-2005

Fire resistance tests for service installations - Part 6 : raised access and hollow core floors.

EN ISO 14438-2002

Glass in Building. Determination of Energy Balance Value. Calculation Method ISO 14438:2002

实施日期：2002-06-24

NF P51-002-3-2007

Chimneys - Thermal and fluid dynamic calculation methods - Part 3 : methods for the development of diagrams and tables for chimneys serving one heating appliance.

NF P75-442-1-2005

Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: specification for bonded and loose-fill products before installation.

BS 1153-1992

明胶合银型缩微胶片的冲洗和贮存的推荐方法

Verarbeitung und Lagerung von Mikrofilm von Silber-Gelatine-Typ Processing and Storage of Silver-Gelatin-Type Microfilm Recommandation pour le traitement et la conservation des microfilms de type gelat...

适用范围：This British Standard gives recommendations for the processing and commercial or archival storage of microfilm that is in roll, sheet, strip or card form, mounted or unmounted. It applies to microfilm ...

实施日期：1992-05-01

BS 3522-1962

外科用皮下注射针头(流尔式针座)

Chirurgische Injektionsnadeln (Lueer-Spritze). Spezifikation Specification for Hypodermic surgical mounted needles (Luer fitting) Aiguilles hypodermiques chirurgicales montees (montage Luer). Specifica...

适用范围：Stainless steel hypodermic needles 26 gauge (0.018 in, 0.45 mm) to 17 gauge (0.056 in, 1.40 mm), with Luer conical socket (6 per cent taper); method of size designation. Regular points with a bevel of ...

实施日期：1962-07-02

BS IEC 61010-3-010-1999

测量、控制和实验室用电气设备的安全要求.IEC 61010-2-010的合格鉴定报告.材料加热用实验室设备的特殊要求

Safety Requirements for Electrical Equipment for Measurement,Control,and Laboratory Use-Part 3-010:Conformity Verification Report for the IEC 61010-2-010,Particular Requirements for Laboratory Equipmen...

适用范围：Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 3-010: Conformity verification report for IEC 61010-2-010, Particular requirements for laboratory equipm...

实施日期：1999-10-15

BS 5131-1.1-1991

Schuhe und Schuhwerkstoffe. Klebstoffe. Waermebestaendigkeit von Klebverbindungen Methods of Test for Footwear and Footwear Materials-Part 1:Adhesives-Section 1.1:Resistance of Adhesive Joints to Heat (Creep Test) Chaussures et materiaux pour chaussures. Colles. Resistance. la chaleur des assemblages colles (essai de fluage)

实施日期：1991-02-28

EN 1366-2-1999

Fire Resistance Tests for Service Installations. Part 2:Fire Dampers

实施日期：1999-08-01

NF P50-744-1996

Thermal insulation. Determination of steady-state thermal transmission properties of thermal insulation for circular pipes.

BS 1251-1987

明壁炉部件规范

Open-Fireplace Components

适用范围：Firebacks; prefabricated fireplace surrounds and hearths; throat-forming lintels. Applies to 350 mm, 400 mm, 450 mm and 500 mm open fires.

实施日期：1987-01-01

ASTM C1199-2012

用热箱法测量门窗系统稳态热传递系数的试验方法

Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods