BS EN 3083-2001

钛合金管连接件8°30' 修理用闷头长焊接端头活接头

Luft-und Raumfahrt. Rohrverschraubung 8 0' aus Titanlegierung. Gerade Schottverschraubungen,lang mit Anschweissende,fuer Reparatur Pipe Coupling 8 Degrees 30' in Titanium Alloy-Unions,Bulkhead,Long Wel...

适用范围：This standard specifies the characteristics of unions, bulkhead, long, welded end for pipe couplings 8°30', in titanium alloy, for aerospace applications to be used as repair couplings to replace EN 36...

实施日期：2001-11-20

ISO 13797-2012

船舶与航海技术 船舶系泊和拖曳配件 十字形系缆柱

Ships and marine technology -- Ship''s mooring and towing fittings -- Cruciform bollards

发布日期：2012-07-01  实施日期：2012-07-01

DIN EN 14208-2004

移动气瓶 气体运输用容积1000 L以下焊接压力桶规范 设计和结构

Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction

适用范围：This European Standard specifies the minimum requirements for the material, design, construction and workmanship, inspection and testing at manufacture of refillable welded steel gas drums of volumes 1...

实施日期：2004-05-01

NF A81-365-6-1997

Soft soldering fluxes. Test methods. Part 6 : determination and detection of halide (excluding fluoride) content.

EN 10219-1-2006

Cold formed welded structural hollow sections of non-alloy and fine grain steels. Part 1:Technical delivery conditions

实施日期：2006-04-01

DIN 28190-2009

Floating head heat exchanger with welded floating head - Examples of design

实施日期：2009-09-01

BS EN 14638-3-2010

Ortsbewegliche Gasflaschen. Wiederbefüllbare geschwei?te Gef??e mit einem Fassungsraum von nicht mehr als 150 Liter. Flaschen aus geschwei?tem Kohlenstoffstahl,ausgelegt nach experimentellen Verfahren Transportable gas cylinders. Refillable welded receptacles of a capacity not exceeding 150 litres Part 3:Welded carbon steel cylinders made to a design justified by experimental methods Bouteilles. gaz transportables. Récipients soudés rechargeables d'une capacit inférieure ou égale. 150 litres. Bo

实施日期：2010-12-31

NF E29-736-2/A1-2006

Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 2 : stainless steel.

NF M88-745/A1-2006

LPG equipment and accessories - Equipping of LPG tanks overground and underground.

IEC 60807-6-1988

频率低于3MHz的矩形连接器 第6部分:具有定位导向件的20号(7.5A)圆形接触件的矩形连接器系列的详细规范 固定钎焊型

Rectangular connectors for frequencies below 3 MHz - Part 6: Detail specification for a range of rectangular connectors with size 20 (7.5 A) round contacts having polarized guides - Fixed solder contac...

适用范围：Covers a range of rectangular, rack and panel, multipole connectors with round contacts having a maximum rated current of 7.5 A per contact. The contacts have solder terminations and the connector is p...

发布日期：1988-05-14  实施日期：1988-05-14

BS EN 1439-2008

Flüssiggas-Ger?te und Ausrüstungsteile. Kontrollverfahren für ortsbewegliche,wiederbefüllbare Flaschen für Flüssiggas (LPG) vor,w?hrend und nach dem Füllen LPG equipment and accessories. Procedure for checking LPG cylinders before,during and after filling Equipements pour GPL et leurs accessoires. Procédure de vérification des bouteilles transportables et rechargeables pour GPL avant,pendant et après le remplissage

实施日期：2008-03-31

ASTM B608-2007

铜合金焊接管规格

Standard Specification for Welded Copper-Alloy Pipe

适用范围：<p>1.1 This specification establishes the requirements for arc-welded pipe for use in brackish water or seawater piping systems.</p><p>1.2 Units - The values stated in inch-pound units are regarded as ...

实施日期：2007-10-01

ASTM B363-2014

无缝和焊接的非合金钛与钛合金焊接配件规格

Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings

适用范围：This specification covers fittings intended for general corrosion-resisting and elevated-temperature services, factory made from unalloyed titanium and titanium alloys. The titanium for welding fitting...

发布日期：2014-05-01  实施日期：2014-05-01

DIN EN 10217-7-2005

压力焊接钢管 交货技术条件 第7部分:不锈钢管

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes

DIN EN ISO 10893-4-2011

Non-destructive testing of steel tubes. Part 4:Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections (ISO 10893-4:2011); German version EN ISO 10893-4:2011

NF A49-201-4/A1-2005

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4 : electric welded non-alloy steel tubes with specified low temperature properties.

NF A35-010-2005

Steel for the reinforcement of concrete - Weldable reinforcing steel - General.

BS EN 10025-3-2004

非合金结构钢热轧制品.长形产品的交货技术条件

Warmgewalzte Erzeugnisse aus Baustaehlen. Technische Lieferbedingungen fuer normalgegluehte/normalisierend gewalzte schweissgeeignete Feinkornbaustaehle Hot rolled products of structural steels Part 3:...

适用范围：Part 3 of this document, in addition to part 1, specifies requirements for flat and long products of hot rolled weldable fine grain structural steels in the normalized/normalized rolled delivery condit...

实施日期：2004-11-17

ASTM B944-2006(2011)

Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)

DIN EN 10217-3-2005

压力焊接钢管 交货技术条件 第3部分:合金细晶粒钢管

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes

适用范围：Modify the clause 9 Inspection and the Annex ZA in order to make them in line with the provision of Directive 97/23/EC (PED).

实施日期：2005-04-01