NF M88-716/IN1-2012

LPG equipment and accessories - Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers design and manufacture.

NF A89-572-2006

Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross tension testing.

EN 287-6-2010

焊接工的资质考核测试 - 融合焊接 第6部分: 铸铁

Qualification test of welders. Fusion welding. Part 6:Cast iron

实施日期：2010-01-01

EN ISO 10675-1-2013

Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys (ISO 10675-1:2008)

发布日期：2013-08-14  实施日期：2013-08-14

EN ISO 9606-2-2004

Qualification test of welders. Fusion welding. Part 2:Aluminium and aluminium alloys ISO 9606-2:2004;Supersedes EN 287-2:1992

实施日期：2004-12-01

DIN EN 15085-1-2013

铁路设施.铁路车辆和部件的焊接法.第1部分:总则

Railway applications – Welding of railway vehicles and components – Part 1: General

发布日期：2013-11-01  实施日期：2013-11-01

BS EN ISO 23277-2009

Non-destructive testing of welds. Penetrant testing of welds. Acceptance levels

实施日期：2010-01-31

ISO 10675-1-2008

焊接的无损检测 射线探伤 的验收标准 第1部分:钢、镍、钛及其合金

Non-destructive testing of welds -- Acceptance levels for radiographic testing -- Part 1: Steel, nickel, titanium and their alloys

适用范围：ISO 10675-1:2008 specifies acceptance levels for indications from imperfections in butt welds of steel, nickel, titanium and their alloys detected by radiographic testing. If agreed, the acceptance lev...

发布日期：2008-03-01  实施日期：2008-03-01

ISO 9692-4-2003

焊接和相关工艺 接头制备建议 第4部分:复合钢

Welding and allied processes -- Recommendations for joint preparation -- Part 4: Clad steels

适用范围：ISO 9692-4:2003 gives recommendations for types of joint preparation for clad steels.

发布日期：2003-08-01  实施日期：2003-08-01

GB/T 26953-2011

焊缝无损检测 焊缝渗透检测 验收等级

Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels

适用范围：本标准规定了金属焊缝中表面开口缺欠的渗透检测显示的验收等级。 本标准主要用于制造检验，若认为适合，也可用于在役检验。

发布日期：2011-09-29  实施日期：2012-03-01

EN ISO 17657-2-2007

Resistance welding. Welding current measurement for resistance welding. Part 2:Welding current meter with current sensing coil

实施日期：2007-06-01

NF A88-110-2-2005

Qualification test of welders - Fusion welding - Part 2 : aluminium and aluminium alloys.

NF M88-742-2005

Inspection and testing of LPG road tankers.

SY/T 0059-1999

控制钢制设备焊缝硬度防止硫化物应力开裂技术规范

Technical specification of controlling weld hardness of steel equipment to prevent sulfide stress cracking

适用范围：本标准仅对暴露于湿含硫化氢酸性油气环境中的压力容器、储罐、配管等焊缝硬度提出了控制要求。 本标准主要适用于符合《天然气地面设施抗硫化物应力开裂金属材料要求》SY/I 0599 规定的优质低碳钢和屈服强度低于360MPa的低合...

实施日期：1999-12-01

DIN EN ISO 17636-1-2013

Non-destructive testing of welds – Radiographic testing – Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013)

发布日期：2013-05-01  实施日期：2013-05-01

BS EN 424-2002

弹性地板覆盖物.家具腿模拟移动效应的测定

Elastische Bodenbelaege. Bestimmung des Verhaltens bei einer nachgeahmten Verschiebung eines Moebelfusses Resilient Floor Coverings-Determination of the Effect of the Simulated Movement of a Furniture ...

适用范围：This European Standard specifies a method for determining the resistance of an installed resilient floor covering tothe mechanical stress resulting from the simulated movement of a furniture leg.

实施日期：2002-02-26

BS EN ISO 10893-7-2011

Non-destructive testing of steel tubes Part 7:Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections

实施日期：2011-04-30

NF E86-200-4/AC4-2013

Corrigendum 4 to standard NF EN 13445-4 V4:2009

NF E29-725-2004

Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction.

DIN EN ISO 9692-4-2003

焊接和相关工艺 接头制备建议 第4部分:复合钢

Welding and allied processes - Recommendations for joint preparation - Part 4: Clad steels (ISO 9692-4:2003)

适用范围：This part of EN ISO 9692 gives recommendations for types of joint preparation for clad steels.