EN ISO 3262-15-2000

Extenders for Paints. Specifications and Methods of Test. Part 15:Vitreous Silica ISO 3262-15:2000

实施日期：2000-05-01

ISO 14922-4-1999

热喷涂 热喷涂结构的质量要求 第4部分:基本质量要求

Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 4: Elementary quality requirements

发布日期：1999-07-01  实施日期：1999-07-01

GB 11399-1989

热熔粘合衬热熔胶涂布量和涂布均匀性的测定

实施日期：1990-04-01

NF L10-534-2008

Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D < or = 150 mm - Rm > or = 1300 MPa.

DIN EN ISO 14920-1999

热喷镀.自精炼合金的热喷镀和熔融

Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:1999); German version EN ISO 14920:1999

GB/T 3682-2000

热塑性塑料熔体质量流动速率和熔体体积流动速率的测定

Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics

适用范围：本标准规定了在规定的温度和负荷条件下测定热塑性塑料熔体质量流动速率（MFR）和熔体体积流动速率（MVR）的方法。通常，测定熔体流动速率的试验条件由本标准引用的材料标准规定。热塑性塑料的一般试验条件列于附录A和附录B中...

发布日期：2000-10-27  实施日期：2001-05-01

EN ISO 11357-7-2013

Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics (ISO 11357-7:2002)

发布日期：2013-01-16  实施日期：2013-01-16

GB/T 1020-1989

电渣重熔炉试验方法

Test methods for electro-slag remelting furnaces

实施日期：1990-01-01

DIN EN 3476-2007

Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Softened - Forging stock - a or D≤300 mm; German and English version EN 3476:2006

实施日期：2007-04-01

GB/T 7920.15-1987

沥青贮存、熔化和加热装置术语

Asphalt storage melting and heating units--Terminology

ISO 11126-4-1993

涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第4部分:煤炉渣

Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 4: Coal furnace slag

适用范围：Specifies requirements for coal furnace slag abrasives: designation, sampling, identification and marking, information to be supplied by the manufacturer or supplier, ranges of particle sizes and value...

发布日期：1993-12-01  实施日期：1993-12-01

EN 13920-12-2003

Aluminium and aluminium alloys. Scrap. Part 12:Turnings consisting of one single alloy

实施日期：2003-04-01

NF A46-402-2006

冷成型用冷轧无涂层低碳高屈服强度钢制扁平轧材--尺寸和形状公差

Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape.

DIN EN 4314-2008

Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Non heat treated, forging stock a or D≤250 mm

实施日期：2008-03-01

BS 1446-1973

道路与人行道用地沥青砂胶(天然岩石地沥青细集料)规范

Specification for mastic asphalt (natural rock asphalt fine aggregate) for roads and footways

适用范围：Recommendations for laying, information for enquiries and/or orders appended.

实施日期：1973-01-01

FZ/T 01076-1999

服装用热熔粘合衬组合试样制作方法

Making method of composite specimen of fusible interlinings for garments ...

实施日期：1999-02-01

NF A91-223-3-1999

Thermal spraying. Quality requirements of thermally sprayed structures. Part 3 : standard quality requirements.

EN 1328-1996

Cement Bonded Particleboards. Determination of Frost Resistance

实施日期：1996-08-01

NF L10-510-2007

Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Plate - 6 mm < a < or = 40 mm - 1 750 MPa < or = Rm < or = 2000 MPa.

BS T 79-1997

Spezifikation fuer 21/2% Nickel-Chrom-Molybdenium Stahlrohre (1160Mpa) 2 1/2 % Nickel-Chromium-Molybdenum Steel Tubes (1160 MPa) Specification des tubes en acier de 21/2% de nickel-chrome-molybdene (1160 Mpa)

实施日期：1997-05-15