DIN 41677-1987

仪表用煤断器 不可置换G 型熔断体用带螺丝密封６·３Ａ２５０V 的G 型熔断器底座 固定螺纹Ｍ１６×１和Pg１１

Miniature fuses; screw-in type 6,3 A/250 V fuse bases not affording protection against contact with live parts for non interchangeable fuse-links

DIN 49518-1979

D型保险丝座同心度检验规C17

Gauges C17, for concentricity of fuse-bases

DIN 49300-1979

D 熔断器 一览表

D-type fuses; synopsis

UL 4248-12-2007

UL Standard for Safety Fuseholders ?Part 12: Class R First Edition; Reprint with revisions through and including January 31, 2008

UL 4248-5-2007

UL Standard for Safety Fuseholders ?Part 5: Class G First Edition; Reprint with revisions through and including January 31, 2008

UL 4248-6-2007

UL Standard for Safety Fuseholders ?Part 6: Class H First Edition; Reprint with revisions through and including January 31, 2008

BS 2692-2-1956

1000V以上交流电熔断器.第2部分:冲出式熔丝

Fuses for voltages exceeding 1000 V a.c. Expulsion fuses

UL 372-2007

燃气和燃油设备的主要控制

UL Standard for Safety Automatic Electrical Controls for Household and Similar Use. Part 2:Particular Requirements for Burner Ignition Systems and Components Sixth Edition

实施日期：2007-07-31

DIN 41671-1987

仪表用熔断器 可置换的G 型熔丝用的6.3A,250V 带螺线密封的G 型熔断体座,固定螺纹Ｍ１４×１

Miniature fuses; fuse base 6,3 A/250 V, not affording protection against contact with live parts; screw-in type, fastening thread M 14 <x> 1 for interchangeable fuse-links

DIN 49339-1985

D 型环形接触螺钉,背面接线带凸缘的D 型熔断器底座 D Ⅲ６３A ,６６０V 以下

D-type fuse-bases D III 63 A up to 660 V, for back connection, with flange, for gauge rings

DIN 41664-1974

仪表用熔断器 可置换的G 型熔管熔断体用的６·３Ａ２５０V 带螺丝封口的安全接触式 G 型熔断体座 G 型螺帽

Miniature fuses; screw-type fuse holders, 6,3 A, 250 V, affording protection against contact with live parts, for interchangeable cartridge fuse-links, fuse-base, fuse-carrier

DIN 49325-1980

D 型环形接触螺钉E １６,２５A ,５００V 内装式带盖正面接线的D 型熔断器底座

D-type fuse-bases E 16, 25 A, 500 V, for front connection, with cover, for flush mounting, for gauge rings

DIN 49500-1980

线路保护开关 交流415V和直流250V,6至25A ,可旋入D11 型熔断器底座

Miniature circuit breakers, 6 to 25 A, 415 V a.c. and 250 V d.c., screw-in in D-type fuse-bases DII

DIN 49335-1985

D 型旋紧接触螺钉,前面接线的D 型熔断器底座 D Ⅲ６３A ,７５０V

D-type fuse-bases for front connection, for screw in gauge rings, D III 63 A 750 V

BS 7656-1993

电杆上的低压熔断器规范.315A额定电流

Specification for low-voltage pole-mounting fuses (cut-outs). 315 A rating

IEC 60127-1-2006

微型熔断器 第1部分:微型熔断器的定义和微型熔断体的一般要求

Miniature fuses. Part 1:Definitions for miniature fuses and general requirements for miniature fuse-links

发布日期：2006-06-13  实施日期：2006-06-13

BS HD 60269-2-2010

Niederspannungssicherungen. Zus?tzliche Anforderungen an Sicherungen zum Gebrauch durch Elektrofachkr?fte bzw. elektrotechnisch unterwiesene Personen (Sicherungen überwiegend für den industriellen Gebrauch). Beispiele für genormte Sicherungssysteme A bis J Low-voltage fuses Part 2:Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to J Fusibles basse tension. Exigences supplémentaires pour les

实施日期：2010-11-30

UL 4248-11-2007

UL Standard for Safety Fuseholders ?Part 11: Type C (Edison Base) and Type S Plug Fuse First Edition; Reprint with revisions through and including January 31, 2008

NF C60-436-1994

Miniature fuses - Part 6 : fuse-holders for miniature cartridge fuse-links.

DIN 43853-1988

计数器盘 主要尺寸,连接尺寸

Meter boards; main dimensions and termination dimension