NF A89-057-4-2007

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4 : finishing welding of aluminium castings.

EN ISO 1071-2003

Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification (ISO 1071:2003)

发布日期：2003-07-01  实施日期：2003-07-01

GB/T 12467.5-2009

金属材料熔焊质量要求 第5部分：满足质量要求应依据的标准文件

Quality requirements for fusion welding of metallic materials - Part 5: Standard documents need to conform to claim conformity to the quality requirements

适用范围：GB/T 12467的本部分规定了符合GB/T 12467.2、GB/T 12467.3、GB/T 12467.4质量要求应依据的标准指南。本部分适用于制造商焊接能力的评估认证，本部分应与GB/T 12467.2、GB/T 12467.3、GB/T 12467.4配套使用。

发布日期：2009-10-30  实施日期：2010-04-01

EN 1011-7-2004

焊接 金属材料焊接的推荐 第7部分:电子束焊接

Welding. Recommendations for welding of metallic materials. Part 7:Electron beam welding

实施日期：2004-07-01

QJ 3115A-2011

导管熔焊接头角焊缝X射线照相检验方法

X-ray radiographic testing method for fillet weld of fusion-welded joints for pipe

适用范围：本标准适用于壁厚为住0.3mm~6.0mm，直径不大于 102mm，材料为钢、高温合金、铝合金、钦刀钦合金等，接头形式为对接接头、管-管 T 形接头、管-板 T 形接头、角接接头、套管接头的导管熔焊接头角焊缝 X 射线照相检验。

发布日期：2011-07-19  实施日期：2011-10-01

BS EN ISO 24034-2010

Welding consumables. Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys. Classification

实施日期：2010-10-31

QJ 1843A-1996

结构钢、不锈钢熔焊工艺规范

发布日期：1996-03-20  实施日期：1996-10-01

DIN EN ISO 15614-2-2005

金属材料的焊接规范和资格鉴定 焊接程序试验 第2部分:铝和铝合金的弧焊

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys

适用范围：This standard specifies how a preliminary welding procedure specification is qualified by welding procedure tests. This standard defines the conditions for the execution of welding procedure tests and ...

实施日期：2005-07-01

DIN ISO 857-2-2007

Welding and allied processes - Vocabulary - Part 2: Soldering and brazing processes and related terms (ISO 857-2:2005)

实施日期：2007-03-01

ISO 13953-2001

聚乙烯导管及其配件 抗张强度的测定以及粗保险丝接点的测试片的不合格品测定

Polyethylene (PE) pipes and fittings -- Determination of the tensile strength and failure mode of test pieces from a butt-fused joint

发布日期：2001-09-01  实施日期：2001-09-01

EN 1011-3-2000

焊接.金属材料焊接的推荐.第3部分:不锈钢的弧焊

Welding. Recommendations for Welding of Metallic Materials. Part 3:Arc Welding of Stainless Steels Includes Amendment A1:2003

实施日期：2000-09-01

EN 1011-2-2001

焊接.金属材料焊接的推荐.第2部分:铁素体钢的弧焊

Welding Recommendations for welding of metallic materials Part 2:Arc welding of ferritic steels Includes Amendment A1:2003

实施日期：2001-01-01

GB/T 6417-1986

金属熔化焊焊缝缺陷分类及说明

实施日期：1987-04-30

EN ISO 13916-1996

Welding. Guidance on the Measurement of Preheating Temperature,Interpass Temperature and Preheat Maintenance Temperature ISO 13916:1996

实施日期：1996-08-01

EN ISO 14744-3-2000

Welding. Acceptance Inspection of Electron Beam Welding Machines. Part 3:Measurement of Beam Current Characteristics ISO 14744-3:2000

实施日期：2000-04-01

ISO 1071-2003

焊接消耗品 铸铁的手工电弧焊接的涂敷电焊条 符号化

Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification

适用范围：ISO 1071:2003 specifies requirements for classification of covered electrodes for manual metal arc welding, wire electrodes for metal arc welding, tubular cored electrodes for metal arc welding with an...

发布日期：2003-07-01  实施日期：2003-07-01

ISO 17636-2-2013

Non-destructive testing of welds -- Radiographic testing -- Part 2: X- and gamma-ray techniques with digital detectors

发布日期：2013-01-01  实施日期：2013-01-01

ISO 24373-2008

焊接耗材 铜和铜合金的熔焊用实心焊丝和棒材 分类

Welding consumables -- Solid wires and rods for fusion welding of copper and copper alloys -- Classification

适用范围：ISO 24373:2008 specifies requirements for classification of solid wires and rods for fusion welding of copper and copper alloys. The classification of the solid wires and rods is based on their chemica...

发布日期：2008-03-01  实施日期：2008-03-01

BS EN ISO 15612-2004

金属材料焊接程序的规范和合格鉴定.标准焊接程序采用的合格鉴定

Specification and qualification of welding procedures for metallic materials. Qualification by adoption of a standard welding procedure

适用范围：ISO 15612:2004 gives the information necessary to explain the requirements referenced in ISO 15607 about qualification by adoption of a standard welding procedure, and establishes the conditions, limit...

EN ISO 14744-5-2000

Welding. Acceptance Inspection of Electron Beam Welding Machines. Part 5:Measurement of Run-Out Accuracy ISO 14744-5:2000

实施日期：2000-04-01