GB/T 12467.2-1998

焊接质量要求 金属材料的熔化焊 第２部分：完整质量要求

Quality requirements for welding--Fusion welding of metallic materials--Part 2:Comprehensive quality requirements

实施日期：1999-07-01

ISO 6520-1-2007

焊接及相关工艺 金属材料几何缺欠的分类 第1部分:熔化焊

Welding and allied processes -- Classification of geometric imperfections in metallic materials -- Part 1: Fusion welding

适用范围：ISO 6520-1:2007 serves as the basis for a precise classification and description of weld imperfections. In order to avoid any confusion, the types of imperfection are defined with explanations and illu...

发布日期：2007-07-01  实施日期：2007-07-01

ISO 3834-4-2005

金属材料熔化焊质量要求 第4部分:基本质量要求

Quality requirements for fusion welding of metallic materials -- Part 4: Elementary quality requirements

适用范围：ISO 3834-4:2005 defines elementary quality requirements for fusion welding of metallic materials both in workshops and at field installation sites.

发布日期：2005-12-01  实施日期：2005-12-01

ISO 15614-10-2005

金属材料焊接工艺规程及评定 焊接工艺评定试验 第10部分:高压干焊

Specification and qualification of welding procedures for metallic materials -- Welding procedure test -- Part 10: Hyperbaric dry welding

适用范围：ISO 15614-10:2005 specifies how to qualify welding procedure specifications for welding in hyperbaric dry environments. It also specifies the minimum testing requirements necessary for qualification of...

发布日期：2005-02-01  实施日期：2005-02-01

NF A81-331-2004

铝和铝合金. 焊接. 硬钎焊和焊接--钎焊--法汉冶金词典. 焊条. 符号. 规范

Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification.

ISO 15613-2004

金属材料焊接程序的规范和鉴定 预生产焊接试验的鉴定

Specification and qualification of welding procedures for metallic materials -- Qualification based on pre-production welding test

适用范围：ISO 15613:2004 specifies how a preliminary welding procedure specification is qualified based on pre-production welding tests. It is applicable to arc welding, gas welding, beam welding, resistance wel...

发布日期：2004-06-01  实施日期：2004-06-01

GB 5292.5-1985

熔炼焊剂化学分析方法 磺基水杨酸光度法测定氧化铁量

实施日期：1986-05-01

EN 1011-4-2000

焊接.金属材料焊接的推荐.第4部分:铝和铝合金的弧焊

Welding. Recommendations for Welding of Metallic Materials. Part 4:Arc Welding of Aluminium and Aluminium Alloys Includes Amendment A1:2003

实施日期：2000-09-01

NF A89-250-2-2006

Quality requirements for fusion welding of metallic materials - Part 2 : comprehensive quality requirements.

BS EN 13067-2012

塑料焊接人员 焊工的资格检验 热塑焊接组件

Plastics welding personnel. Qualification testing of welders. Thermoplastics welded assemblies

发布日期：2012-11-30  实施日期：2012-11-30

NF A89-510-1997

Non-destructive examination of welds. Radiographic examination of welded joints.

EN ISO 3834-1-2005

Quality requirements for fusion welding of metallic materials. Part 1:Criteria for the selection of the appropriate level of quality requirements ISO 3834-1:2005;Supersedes EN 729-1:1994

实施日期：2005-12-01

NF A88-950-2-2002

Qualification testing of welders for under-waster welding - Part 2 : diver-welders and welding operators for hyperbaric dry welding.

EN ISO 15614-5-2004

Specification and qualification of welding procedures for metallic materials. Welding procedure test. Part 5:Arc welding of titanium,zirconium and their alloys ISO 15614-5:2004

实施日期：2004-03-01

NF A89-052-6-2013

Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 6 : laser-arc hybrid welding

ISO 9017-2001

金属材料焊接的破坏性测试 断裂试验

Destructive tests on welds in metallic materials -- Fracture test

发布日期：2001-04-01  实施日期：2001-04-01

BS EN ISO 15610-2003

金属材料焊接程序的规范和认可.基于试验消耗品的认可

Anforderung und Qualifizierung von Schweissverfahren fuer metallische Werkstoffe. Qualifizierung aufgrund des Einsatzes von geprueften Schweisszusaetzen Specification and qualification of welding proce...

适用范围：ISO 15610:2003 gives the necessary information to explain the requirements referenced in ISO 15607 concerning the qualification of welding procedures based on tested consumables. In addition, it gives ...

实施日期：2003-12-02

BS EN ISO 9606-4-1999

焊工的认可试验.熔焊.镍及镍合金

Pruefung von Schweissern. Schmeizschweissen. Nickel und Nickellegierungen Approval Testing of Welders-Fusion Welding-Part 4:Nickel and Nickel Alloys Epreuve de qualification des soudeurs. Soudage par f...

适用范围：This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of welder performance for the welding of nickel. ...

实施日期：1999-05-15

BS EN 1011-7-2004

焊接.金属材料焊接的推荐规范.电子束焊

Welding. Recommendations for welding of metallic materials. Electron beam welding

适用范围：This document may be used for the electron beam welding (process no. 51 according to EN ISO 4063) of weldable metallic materials according to CR ISO 15608. It does not contain data on permissible stres...

NF A89-053-2004

Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables.