GB 5292.6-1985

熔炼焊剂化学分析方法 热解法测定氟化钙量

实施日期：1986-05-01

NF A89-057-10-2005

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 10 : hyperbaric dry welding.

BS 2790-1992

焊接结构的壳式锅炉的设计和制造规范

Design and Manufacture of Shell Boilers of Welded Construction AMD 9346 December 15,1996;

适用范围：Materials, determination of design temperature of components, calculation of scantlings, compensation of openings, design of supports, manufacturing procedures, tolerances, welding, inspection, non-des...

实施日期：1992-01-01

NF A81-332-2011

Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification.

QJ 1842A-2011

结构钢、不锈钢熔焊技术要求

Technical requirements of structural steel and stainless steel fusion welding

适用范围：本标准规定了结构钢、不锈钢熔焊 〔 包括手工焊、埋弧焊、氧乙炔焊、细丝二氧化碳保护焊、钨极氢弧焊、熔化极氢弧焊、等离子焊接和混合气体保护焊）的一般要求、接头质量等级、接头质量要求、缺陷的修整、返修焊及接头检验要求。

发布日期：2011-07-19  实施日期：2011-10-01

NF A89-057-1/A2-2012

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1 : arc and gas welding of steels and arc welding of nickel and nickel alloys - Amendment 2.

BS EN ISO 14744-5-2001

焊接 电子束焊接机械的验收检验 第5部分:偏转精度的测量

Schweissen. Abnahmepruefung von ElektronenstrahlSchweissmaschinen. Messen der Fuehrungsgenauigkeit Welding-Acceptance Inspection of Electron Beam Welding Machines-Part 5:Measurement of Run-Out Accuracy...

适用范围：This standard is intended for use when the run-out accuracy of the moving parts of electron beam welding machines complying with EN ISO 14744-1 is to be measured in connection with an acceptance inspec...

实施日期：2001-04-15

EN ISO 15614-3-2008

Specification and qualification of welding procedures for metallic materials. Welding procedure test. Part 3:Fusion welding of non-alloyed and low-alloyed cast irons

实施日期：2008-03-01

DIN EN ISO 4063-2011

Welding and allied processes. Nomenclature of processes and reference numbers (ISO 4063:2009,Corrected version 2010-03-01); Trilingual version EN ISO 4063:2010

ISO 14732-1998

焊接人员 金属材料的完全机械化焊接和自动焊接的熔化焊及电阻焊操作人员的资格审查

Welding personnel -- Approval testing of welding operators for fusion welding and of resistance weld setters for fully mechanized and automatic welding of metallic materials

发布日期：1998-07-01  实施日期：1998-07-01

ISO 17653-2012

电阻焊 金属材料焊接的破坏性试验 电阻点焊的扭转试验

Resistance welding -- Destructive tests on welds in metallic materials -- Torsion test of resistance spot welds

发布日期：2012-05-01  实施日期：2012-05-01

NF A89-101-4/A1-2004

Welding - Recommendations for welding of metallic materials - Part 4 : arc welding of aluminium and aluminium alloys.

BS EN 1011-8-2004

焊接.金属材料焊接的推荐规范.铸铁的焊接

Schweissen. Empfehlungen zum Schweissen metallischer Werkstoffe. Schweissen von Gusseisen Welding. Recommendations for welding of metallic materials. Part 8:Welding of cast irons Soudage. Recommandatio...

发布日期：2004-11-17  实施日期：2004-11-17

GB/T 12605-1990

钢管环缝熔化焊对接接头射线透照工艺和质量分级

Methods of radiographic inspection and quality classification of circumferential fusion welded butt joints in steel pipes and tubes

实施日期：1991-12-01

CNS 12895-1991

熔接与截割器(切断器)用橡皮软管接头

Rubber Hose Connections for Welding and Cutting Equipment

发布日期：1991-08-18  实施日期：1991-08-18

DIN EN ISO 15614-4-2005

金属材料的焊接规范和资格鉴定 焊接程序试验 第4部分:铝铸件的加工焊接

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings

适用范围：This standard specifies how a welding procedure specification for finishing welding of aluminium castings will be qualified by welding procedure tests. This standard does not refer to any repair weldin...

实施日期：2008-01-01

DIN EN ISO 17636-1-2013

Non-destructive testing of welds – Radiographic testing – Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013)

发布日期：2013-05-01  实施日期：2013-05-01

BS EN ISO 15614-10-2005

金属材料焊接程序的规范和鉴定.焊接程序试验.高压干焊

Specification and qualification of welding procedures for metallic materials. Welding procedure test. Hyperbaric dry welding

适用范围：ISO 15614-10:2005 specifies how to qualify welding procedure specifications for welding in hyperbaric dry environments.It also specifies the minimum testing requirements necessary for qualification of ...

GB 5292.7-1985

熔炼焊剂化学分析方法 氟氯化铅-EDTA容量法测定氟化钙量

实施日期：1986-05-01

DIN 85004-9-2008

铜镍合金管.第9部分:射线照相检验的一般原则

Pipelines of copper-nickel-alloys - Part 9: General principles for the radiographic examination

发布日期：2008-12-01  实施日期：2008-12-01