BS 969-2008

Spezifikation für Grenzen und Toleranzen von Grenzlehren Specification for limits and tolerances on plain limit gauges Ajustements et tolérances pour calibres lisses. limites. Spécification CORR:August 2009

实施日期：2008-11-30

ISO 11363-2-2010

气瓶 气瓶与阀门连接用17E和25E锥螺纹 第2部分:检验量规

Gas cylinder. 17E and 25E taper threads for connection of valves to gas cylinders. Part 2:Inspection gauges

发布日期：2010-05-06  实施日期：2010-05-15

JB/T 11233-2012

校准环规

Calibration ring gauge

适用范围：本标准规定了校准环规的术语和定义、型式与尺寸、要求、检验条件、检验方法、标志和包装等。本标准适用于4mm≤d≤300mm，准确度等级为1级、2级、3级、4级和5级的校准环规。

发布日期：2012-05-24  实施日期：2012-11-01

NF E29-671-1981

气瓶 阀门装配锥体 综合

Gas cylinders. Taper screw thread for value stem and cylinder neck assembly. General.

实施日期：1981-09-01

ASME B47.1-2007

量规半成品

Gage Blanks

适用范围：Gage Blanks / Note: revision of ANSI/ASME B47.1-1988 (R2004) * Approved 2007-01-29.

实施日期：2007-01-01

NF E11-029-1991

钢量规.螺纹环.最大至300mm的直径

Steel gauges. Screw ring gauges. Diameter to 300 mm.

ISO 228-2-1987

非螺纹密封连接的管螺纹. 极限量规检验

Pipe threads where pressure-tight joints are not made on the threads -- Part 2: Verification by means of limit gauges

适用范围：This second edition cancals and replaces the first edition (1980). Specifies the verification of cylindrical threads, the dimensions and tolerances of which are given in ISO 228-1. Since this 55o profi...

发布日期：1987-07-31  实施日期：1987-07-31

HB 4009-1987

气瓶专用锥螺纹中径螺纹环规的校对塞规

发布日期：1987-06-26  实施日期：1988-01-01

BS 1104-1957

一般用梯形螺纹规范

Universaltrapezgewinde. Spezifikation GENERAL PURPOSE ACME SCREW THREADS Filetages Acme universels. Specification PD 5555:July 1965;PD 5707:December 1965;PD 5795:March 15,1966

适用范围：Defines Acme thread; tables of basic sizes, limits and tolerances for standard series of single start threads $9D in to 5 in diameter. Agrees with ASA B1.5:1952 except for pitches associated with diame...

实施日期：1957-06-05

BS 1657-1950

锯齿形螺纹规范

Specification for buttress threads

适用范围：Included angle between pressure and trailing flanks of 52<deg>; standard form of thread has a pressure flank angle of 7<deg>; 'special' form has pressure flank normal to axis of screw. No rigid pitch/d...

实施日期：1950-08-17

BS 572-1985

Specification for interchangeable conical ground glass joints

实施日期：1985-02-28

NF E02-319-1981

钢制规 ７／２４锥度环规

Steel gauges. 7/24 taper ring gauges.

HB 7020-1994

矩形花键综合环规 ｄ＝１１～１１２

发布日期：1994-10-31  实施日期：1995-01-01

HB 3893-1986

普通螺纹环规 ｄ＝２～１００ｍｍ Ｐ＝０．４～２ｍｍ

发布日期：1986-12-30 

HB 3894-1986

普通螺纹环规 ｄ＝Ｍ１０５×１．５～Ｍ１５０×２

发布日期：1986-12-30 

HB 7012-1994

45°渐开线花键综合通端环规

发布日期：1994-10-31  实施日期：1995-01-01

QJ 1160.1-1987

光滑极限量规型式尺寸 圆环规(D>1～100)

发布日期：1987-03-31  实施日期：1989-01-01

HB 4005-1987

气瓶专用切制锥螺纹前光滑环规

发布日期：1987-06-26  实施日期：1988-01-01

BS 31-1940

电气布线用钢导线管和管接头

Stahlleitungen und Verbindungsstuecke fuer elektrische Netze. Spezifikation Specification for Steel conduit and fittings. For electrical wiring Specification. Conduit et raccords en acier pour cablage ...

适用范围：Class A plain conduit; Class B, screwed conduit. Corresponding fittings; couplers, boxes, elbows, etc. Dimensions, test methods, details of gauges. See also BS 4568.

实施日期：1940-07-21

BS 919-2-2007

螺纹规极限和公差规范.第2部分:惠氏螺纹量规及英制螺纹量规

Grenzwerte und Toleranzen von Gewindelehren. Spezifikation Lehren fuer Schraubgewinde nach Whitworth und BA Screw gauge limits and tolerances. Part 2:Specification for gauges for screw threads of Whitw...

适用范围：This Part of BS 919 specifies requirements for the following gaugesintended for checking screw threads in the regular series, suchas BS Whit., BS Fine, B.A., BSC and BS Conduit.a) Screw gauges for gene...

实施日期：2007-11-30