DIN 53766-1-1991

玻璃纤维增强塑料制仪器和容器的检验.粘接强度的测定

Testing of glass fibre reinforced plastics apparatus and containers; determination of adhesive strength

适用范围：This standard contains a test method, including the preparation of specimens, for the determination of the adhesive strength between the laminate and liner.

EN 13923-2005

Filament-wound FRP pressure vessels. Materials,design,manufacturing and testing

实施日期：2005-11-01

EN 13121-4-2005

GRP tanks and vessels for use above ground. Part 4:Delivery,installation and maintenance Incorporating corrigendum February 2007

实施日期：2005-01-01

DIN SPEC 19674-2-2011

Plastics piping systems made from glass fibre reinforced polyethylene (PE-GF) for water supply and for drainage and sewerage under pressure. Part 2:Pipes

DIN EN 705-1994

塑料管系统--玻璃纤维增强热固性塑料管和配件;回归分析及其使用方法

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analyses and their use; German version EN 705:1994

适用范围：This document specifies procedures suitable for the analysis of data which, when converted into logarithms of the values, have either a normal or a skewed distribution. It is intended for use with the ...

JT/T 800-2011

公路用钢网复合型玻璃纤维增强塑料管箱

Glassfiber reinforced plastic steel mesh trunk for highway

适用范围：本标准规定了公路用钢网复合型玻璃纤维增强塑料管箱（以下简称钢网玻璃钢管箱）的产品分类、结构尺寸及偏差、技术要求、试验方法、检验规则、标志、包装、运输和储存等内容。本标准适用于公路用钢网玻璃钢管箱。

发布日期：2011-06-13  实施日期：2011-09-01

ISO 1268-5-2001

增强纤维塑料-试验金属板的生产方法-第五部分:细丝线圈

Fibre-reinforced plastics -- Methods of producing test plates -- Part 5: Filament winding

发布日期：2001-06-01  实施日期：2001-06-01

NF C93-780-2-4-2002

Materials for printed boards and other interconnecting structures - Part 2-4 : reinforced base materials clad and unclad - Polyester non-woven/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad.

ISO 14692-1-2002

石油和天然气工业 玻璃增强塑料(GRP)管 第1部分:术语、符合、应用和材料

Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 1: Vocabulary, symbols, applications and materials

适用范围：ISO 14692-1:2002 gives terms and definitions, describes the philosophy and provides guidance on the range of suitable applications, and defines limitations to the materials of construction for the spec...

发布日期：2002-12-01  实施日期：2002-12-01

ASTM D3753-2005e1

玻璃纤维增强聚酯人孔和湿井规格

Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells

适用范围：<p>1.1 This specification covers glass fiber-reinforced polyester manholes and wetwells for use primarily in sanitary and storm sewer applications. </p><p>1.2 The values given in inch-pound units are t...

ISO 7509-2000

塑料管道系统 玻璃纤维增强热固性塑料（GRP）管材 持续内压力下破坏时间的测定

Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of time to failure under sustained internal pressure

发布日期：2000-06-01  实施日期：2000-06-01

BS EN 1447-2009+A1-2010

Kunststoff-Rohrleitungssysteme. Rohre aus glasfaserverstrkten duroplastischen Kunststoffen (GFK). Bestimmung der Langzeit-Widerstandsfhigkeit gegen Innendruck Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of long-term resistance to internal pressure Systèmes de canalisations en plastiques. Tubes en plastiques thermodurcissables renforcés de verre (PRV). Détermination de la résistance. long terme. la pression interne AMD:January 31,2011

实施日期：2009-04-30

EN 637-1994

塑料管系统.玻璃纤维增强塑料元件;用重力法测定成份及其含量

Plastics Piping Systems. Glass-Reinforced Plastics Components. Determination of the Amounts of Constituents Using the Gravimetric Method

实施日期：1994-01-01

ASTM D3754-2006

玻璃纤维增强热固性树脂（玻璃纤维）污水管及工业耐压管规格

Standard Specification forFiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe"

适用范围：<p>1.1 This specification covers machine-made fiberglass pipe, 8 in. (200 mm) through 156 in. (4000 mm), for use in pressure systems for conveying sanitary sewage, storm water, and many industrial wast...

实施日期：2006-11-01

ISO 1268-1-2001

强化塑料--生产测试盘的方法--第1部分:一般条件

Fibre-reinforced plastics. Methods of producing test plates. Part 1:General conditions first edition

适用范围：The various parts of ISO 1268 (see the foreword) describe methods used to prepare reinforced-plastics plates from which test specimens can be cut. This allows the properties of a composite, or the cons...

实施日期：2001-12-01

EN 976-2-1997

玻璃纤维增强(GPR)塑料制地下油罐.非压力储存液化石油基燃油用卧式圆柱形油罐.第2部分:运输、装卸、储存和安装

Underground Tanks of Glass-Reinforced Plastics (GRP). Horizontal Cylindrical Tanks for the Non-Pressure Storage of Liquid Petroleum Based Fuels. Part 2:Transport,Handling,Storage and Installation of Si...

实施日期：1997-07-01

DIN EN 977-1997

玻璃纤维增强(GRP)制地下油罐.耐化学腐蚀性测定

Underground tanks of glass-reinforced plastics (GRP) - Method for one side exposure to fluids; German version EN 977:1997

适用范围：The document specifies a method for the determination of the chemical resistance of tanks of glass reinforced thermosetting resins for the underground storage of liquids by measuring the change in char...

ISO 10466-1997

塑料管道系统 玻璃纤维增强热固性塑料(GRP)管材 耐初始环状变形可能性试验方法

Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test method to prove the resistance to initial ring deflection

发布日期：1997-11-01  实施日期：1997-11-01

EN 1393-1996

Plastics Piping Systems. Glass-Reinforced Thermosetting Plastics (GRP) Pipes. Determination of Initial Longitudinal Tensile Properties Incorporates Corrigendum November 1997

实施日期：1996-09-01

JT/T 599.1-2004

公路用玻璃纤维增强塑料产品 第1部分：通则

The glass-fiber-reinforced thermosetting-resin product for highway Part 1:General rule ...

实施日期：2005-02-01