DIN CEN/TS 14807-2005

塑料管道系统 不饱和聚酯树脂(UP)基玻璃纤维增强热固塑料(GRP) 地下铺设GRP-UP管线的静态计算导则

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried GRP-UP pipelines

ISO 15306-2003

玻璃增强热固塑料(GRP)管 耐环状内压性能的测定

Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the resistance to cyclic internal pressure

发布日期：2003-12-01  实施日期：2003-12-01

EN 1119-2009

Plastics piping systems. Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods for leaktightness and resistance to damage of non-thrust resistant flexible joints with elastomeric sealing elements

实施日期：2009-03-01

EN 14364-2013

地下压力或无压排水和排污水塑料管道系统 基于未饱和聚酯树脂(UP) 的玻璃纤维增强热固性塑料(GRP) 管,管件和接头规范

Plastics piping systems for drainage and sewerage with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Specifications for pipes,fittings an...

实施日期：2013-02-01

NF C93-764-1996

Base materials for printed circuits. Part 2 : specifications. Specification number 14 : phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test), economic quality.

NF C93-752/A1-2001

Base materials for printed circuits - Part 2 : specification - Specification n o 2 : phenolic cellulose paper copper-clad laminated sheet, economic quality.

NF C93-749-1996

Base materials for printed circuits. Part 2 : specifications. Specification number 1 : phenolic cellulose paper copper-clad laminated sheet, high electrical quality.

IEC 60317-50-2012

特种绕组线规范 第50部分:温度指数200、玻璃丝绕包树脂或漆浸渍裸或漆包圆铜线

Specifications for particular types of winding wires - Part 50: Glass-fibre wound silicone resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200

发布日期：2012-07-09  实施日期：2012-07-09

DIN 53769-1-1988

用玻璃纤维加强的塑料管道的检验; 相当于B 型管道的管道部件的附着抗剪强度的测定

Testing of glass fibre reinforced plastics pipes; determination of the longitudinal shear strength of type B pipe fittings

BS EN 1228-1997

塑料管道系统.玻璃纤维增强热固塑料(GFK).特殊初始环状刚性的测算

Kunststoff-Rohrleitungssysteme. Rohre aus glasfaserverstaerkten duroplastischen Kunststoffen (GFK). Ermittlung der spezifischen Anfangs-Ringsteifigkeit Plastics Piping Systems-Glass-Reinforced Thermose...

实施日期：1997-04-15

BS EN 1796-2013

塑料管供水系统(有压或无压) 以不饱和聚脂树脂为基础的热固性树脂玻璃增强塑料

Plastics piping systems for water supply with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)

发布日期：2013-03-31  实施日期：2013-03-31

DIN EN 13677-1-2003

增强热塑模制材料 GMT规范 第1部分:标记

Reinforced thermoplastic moulding compounds - Specification for GMT - Part 1: Designation

DIN EN 60317-50-2000

绕组线特殊型式的规范;第50部分:玻璃纤维绕树脂或清漆浸渍、光或涂釉的圆铜线;温度指数200

Specifications for particular types of winding wires - Part 50: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 (IEC 60317-50:1999); Germa...

实施日期：2000-09-01

EN 1013-2-1998

单层房顶用透光成形塑料板.第2部分:玻璃纤维增强聚脂(GRP)板的特殊要求和试验方法

Light Transmitting Profiled Plastic Sheeting for Single Skin Roofing. Part 2:Specific Requirements and Test Methods for Sheets of Glass Fibre Reinforced Polyester Resin (GRP) Ratified European Text

实施日期：1998-11-01

DIN 16869-2-1995

离心浇注的玻璃纤维增强聚酯树脂管.第2部分:一般质量要求、检验

Centrifugally cast filled glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 2: General quality requirements, testing

NF C93-757-1996

Base materials for printed circuits. Part 2 : specifications. Specification no 7 : phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test).

BS EN 1393-1997

塑料管道系统.玻璃增强热固性塑料(GRP)管.初始径向拉伸特性的测定

Kunststoff-Rohrleitungssysteme. Rohre aus glasfaserverstaerkten duroplastischen kunststoffen (GFK). Bestimmung der Anfangs-Zugeigenschaften in Laengsrichtung Plastics Piping Systems-Glass-Reinforced Th...

实施日期：1997-04-15

EN 60317-50-2000

Specifications for Particular Types of Windind Wires - Part 50: Glass-Fibre Wound Resin or Varnish Impregnated, Bare or Enamelled Round Copper Wire, Temperature Index 200 IEC 60317-50:1999

EN 13677-1-2003

Reinforced thermoplastic moulding compounds. Specification for GMT. Part 1:Designation

实施日期：2003-02-21

NF P38-301-2013

Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods.