Test methods for the characteristics of getter-mercury dispenser--Test method for mercury content of getter-mercury dispenser
适用范围:本标准适用于释汞吸气剂含汞量的测试,测试条件应符合SJ 2156-82《吸气剂性能测试方法通则》中的有关规定。
发布日期:1986-07-25 实施日期:1987-06-30
Test methods for the characteristics of getter-mercury dispenser--Test methods for mercury yield characteristic of getter mercury dispenser
适用范围:本标准适用于释汞吸气剂的总释汞量、标准释汞量、释汞特性曲线及热稳定性的测试。测试条件应符合SJ 2156-82《吸气剂性能测试方法通则》中的有关规定。
发布日期:1986-07-25 实施日期:1987-06-30
Test method for nitrogen-released and gas-absorbed dynamic curve of nitrogen-doped getter
适用范围:本标准规定了掺氮吸气剂释氮吸气动态曲线的测试方法,适用于掺氮吸气剂蒸散工艺过程中的释氮吸气动态曲线的测试。测试方法应符合GB 9506.1《吸气剂性能测试方法通则》中的有关规定。
发布日期:1988-06-24 实施日期:1988-12-01
Dimensions of Electronic Tubes and Valves Part 2:Dimensions of United Kingdom Electronic Tubes
适用范围:Data sheets give drawings and dimensions of bases, caps and associated gauges and pin straightening tools for those electronic tubes registered in the United Kingdom.
实施日期:1981-01-01
Test method for weld strength of getter support
适用范围:本标准规定了吸气剂支架焊接强度的测试方法,适用于用点焊方法焊接的吸气剂支架焊接牢固度的测试。测试条件应符合GB 9506.1《吸气剂性能测试方法通则》中的有关规定。
发布日期:1988-06-24 实施日期:1988-12-01
Test methods for nitrogen content of nitrogen-doped getter
适用范围:本标准适用于掺氮吸气剂载料中含氮量的测试。测试条件应符合SJ 2155-82《吸气剂性能测试方法通则》中的有关规定。
发布日期:1986-07-24 实施日期:1987-06-30
Measurements of the electrical properties of transmitting tubes--Methods of measurements of static characteristic curve for common grid circuit
适用范围:本标准规定了发射管共栅电路静态特性曲线的测试方法。 本标准适用于电视发射设备用发射管。
发布日期:1991-08-14 实施日期:1992-04-01
Generic rules for test method of getter properties
适用范围:本标准规定了吸气剂性能测试中必须共同遵守的测试条件、辅助工艺规程以及对主要测试设备的要求,适用于吸气剂产品性能的测试。
发布日期:1988-06-24 实施日期:1988-12-01
Mercury releasing combined strips for getter
适用范围:本标准适用于锋带或覆镍铁带与钕永合金粉和锆铝合金粉轧制成的复合带材,供荧光灯、闸流管等作释汞吸气元件用。
发布日期:1986-06-06 实施日期:1987-04-01
Measurements of theelectrical properties of transmitting tubes--Measuring methods of current of anode and grid
适用范围:本标准规定了发射管阳极电流和栅极电流的测试方法。 本标准适用于阳极耗散功率25W以上的空间电荷控制的振荡、调制、调整和功率放大管阳极电流和栅极电流的测试。
发布日期:1991-08-14 实施日期:1992-04-01
Measurements of the electrical properties of transmitting tubes--Measuring methods of grid thermo-emission current
适用范围:本标准规定了发射管栅极热放射电流的测试方法。 本标准适用于阳极耗散功率25W以上的空间电荷控制的振荡、调制、调整和功率放大管第一栅极、第二栅极热放射电流的测试。
发布日期:1991-08-14 实施日期:1992-04-01
Measurements of the electrical properties of low-power electronic tubes--Methods of measurement of anode current and currents of grids having positive potential
Dimensions of Electronic Tubes and Valves Part 1:IEC Dimensions
适用范围:Provides general information, base drawings, outline drawings and conversion data for a large range of internationally used electronic tubes and valves.
实施日期:1981-01-01
Test methods for the characteristics of getter-mercury dispenser--Test method for gas emission of getter mercury dispenser
适用范围:本标准适用于释汞吸气剂放气量的测试。测试条件应符合SJ 2156-82《吸气剂性能测试方法通则》中的有关规定。
发布日期:1986-07-25 实施日期:1987-06-30
Measurements of the electrical properties of transmitting tubes--Measuring methods of grid No.3 control ability
适用范围:本标准规定了发射管第三栅极控制能力的测试方法。本标准适用于阳极耗散功率25W以上的空间电荷控制的振荡、调制、调整和功率放大管第三栅极控制能力的测试。
发布日期:1991-08-14 实施日期:1992-04-01
Test method for gettering properties of barium flash getter
适用范围:本标准规定了蒸散型钡吸气剂吸气性能的测试方法,适用于蒸散型钡吸气剂吸气性能的测试。测试条件应符合GB 9506.1《吸气剂性能测试方法通则》中的有关规定。
发布日期:1988-06-24 实施日期:1988-12-01
Measurements of the electrical properties of transmitting tubes--Measuring methods of grid No.3 cut-off voltage
适用范围:本标准规定了发射管第三栅极截止电压的测试方法。本标准适用于阳极耗散功率25W以上的空间电荷控制的振荡、调制、调整和功率放大管第三栅极截止电压的测试。
发布日期:1991-08-14 实施日期:1992-04-01
Getter terms
适用范围:本标准规定了吸气剂一般术语、分类术语及特性术语。 本标准适用于真空器件用吸气剂。
发布日期:2000-01-03 实施日期:2000-08-01
请选择需要导出的字段:
请选择需要导出的字段:
知识产权声明 | 服务承诺 | 联系我们 | 客户服务 | 关于我们
互联网出版许可证:新出网证(京)字042号 互联网药品信息服务资格证书号:(京)-经营性-2011-0017 信息网络传播视听节目许可证 许可证号:0108284
万方数据标准管理系统V1.0 证书号:软著登字第4252816号
京ICP证:010071 京公网安备11010802020237号 京ICP备08100800号-1
客服电话:4000115888 客服邮箱:service@wanfangdata.com.cn 违法和不良信息举报电话:4000115888 举报邮箱:problem@wanfangdata.com.cn 举报专区:https://www.12377.cn
万方数据知识服务平台--国家科技支撑计划资助项目(编号:2006BAH03B01)©北京万方数据股份有限公司 万方数据电子出版社