NF C71-235/A2-2001

D.C. supplied electronic ballast for tubular fluorescent lamps. Performance requirements.

BS EN 61000-4-21-2003

Electromagnetic compatibility (EMC). Testing and measurement techniques. Reverberation chamber test methods

实施日期：2004-01-20

GB/T 7723-1987

固定式电子衡

Stationary electronic scale

NF U05-004-7-2013

Radiofrequency identification of animals - Part 7 : synchronization of ISO 11785 identification systems.

BS ISO 14229-2006

Road vehicles. Unified diagnostic services (UDS). Specification and requirements

实施日期：2007-01-31

IEC 61375-3-2-2012

铁路电子设备 列车通信网络(TCN) 第3-2部分:多功能车辆总线的一致性测试

Electronic railway equipment - Train communication network (TCN) - Part 3-2: MVB (Multifunction Vehicle Bus) conformance testing

适用范围：IEC 61375-3-2:2012 applies to all equipment and devices implemented according to IEC 61375-3-1, i.e. it covers the procedures to be applied to such equipment and devices when the conformance should be ...

发布日期：2012-06-21  实施日期：2012-06-21

ISO 10681-1-2010

道路车辆 FlexRay通信 第1部分:一般信息和使用实例定义

Road vehicles. Communication on flexray. Part 1:General information and use case definition first edition

适用范围：This part of ISO 10681 defines common requirements for vehicle systems implemented on a FlexRay communication link, as specified in the FlexRay Communications Systems Protocol Specification. It also de...

发布日期：2010-06-16  实施日期：2010-06-15

DIN EN 50121-1-2007

Railway applications - Electromagnetic compatibility - Part 1: General

实施日期：2007-07-01

DIN EN 50125-3-2003

铁路应用 电器环境条件 第3部分:信号和通信设备的环境条件

Railway applications - Environmental conditions for equipment - Part 3: Equipment for signalling and telecommunications

实施日期：2010-09-01

NF C93-464-3-101-2005

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-101 : subracks and associated plug-in units.

GB/T 20919-2007

电子数显外径千分尺

External micrometer with electronic digital display

适用范围：本标准规定了电子数显外径千分尺上的术语和定义、型式与基本参数、要求、试验方法、检验方法、标志与包装等。 　　本标准适用于分辨力高于或等于0.001mm，量程小于或等于30mm，测量范围上限至500mm的电子数显外径千分尺（以下简称...

发布日期：2007-04-30  实施日期：2007-10-01

GB/T 15183-1994

按能力批准评定质量的电子设备用电源变压器分规范

Sectional specificationfor power transformers for use in electronic equipment for capability approval

适用范围：本规范规定了按GB/T 14860规定的能力批准程序放行的电源变压器详细规范编制方法。本规范包括空白详细规范（BDS）。空白详细规范规定了格式并指出了适合于这种型式元件的试验；而最终选择列入检验一览表中的试验是由该规范的...

发布日期：1994-08-02  实施日期：1995-03-01

CNS 4854-1985

电子机器用圆形连接器

Cylindrical Connectors for Electronic Equipment

发布日期：1979-05-28  实施日期：1985-06-27

IEC 61375-3-3-2012

铁路电子设备 列车通信网络(TCN) 第3-3部分:CANopen构成网络(CCN)

Electronic railway equipment - Train communication network (TCN) - Part 3-3: CANopen Consist Network (CCN)

适用范围：IEC 61375-3-3:2012 specifies the data communication bus inside consists that are based on CANopen. CANopen was developed for use in, but is not limited to, industrial automation applications. These app...

发布日期：2012-06-21  实施日期：2012-06-21

DIN EN 50261-1999

铁路应用.电子设备的安装

Railway applications - Mounting of electronic equipment; German version EN 50261:1999

适用范围：The document deals with mounting of electronic equipment in railway applications.

实施日期：1999-08-01

ISO 15764-2004

道路车辆 扩展数据联接安全

Road vehicles -- Extended data link security

适用范围：ISO 15764:2004 describes an extension of data link protocols for enhancing the security of data transfers between electronic control units (ECUs) connected by a communication network used in road vehic...

发布日期：2004-08-01  实施日期：2004-08-01

GB/T 18735-2014

微束分析 分析电镜（ＡＥＭ／ＥＤＳ）纳米薄标样通用规范

Microbeam analysis—General guide for the specification of nanometer thin reference materials for analytical transmission electron microscope (AEM/EDS)

适用范围：本标准规定了分析电镜（ AEM / EDS）即透射电子显微镜或装有扫描附件的透射电镜配备 X 射线能谱仪（ EDS ) ，测量比例因子 KA-B 所用纳米薄标样的技术要求、检测条件和检测方法。

发布日期：2014-07-24  实施日期：2015-03-01

BS EN 61000-6-2-2005

Elektromagnetische Vertraeglichkeit (EMV). Fachgrundnormen Stoerfestigkeit fuer Industriebereiche Electromagnetic compatibility (EMC) Part 6-2:Generic standards Immunity for industrial environments Compatibilite electromagnetique (CEM). Normes generiques. Immunite pour les environnements industriels

实施日期：2005-12-23

GB/T 19520.7-2004

电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第5-102部分：插箱及其插件 电磁屏蔽结构

Mechanical structures for electronic equipment--Dimensions of mechanical structures of the 482.6mm(19in)series--Part 5-102:Subracks and associated plug-in units--Electromagnetic shielding provision

实施日期：2005-02-01

BS ISO 14229-3-2012

Road vehicles - Unified diagnostic services (UDS) Part 3: Unified diagnostic services on CAN implementation (UDSonCAN) - CORR: September 30, 2015

发布日期：2012-12-31  实施日期：2012-12-31