JB/T 10401.1-2004

离网型风力发电机组制动系统 第1部分：技术条件（2010确认）

发布日期：2004-02-10  实施日期：2004-06-01

NF C73-857-1993

Safety of household and similar electrical appliances. Part 2 : particular requirements for ice-cream appliances with incorporated motor-compressors.

IEC 60560-1977

电机用刷握的定义和术语

Definitions and terminology of brush-holders for electrical machines

适用范围：Establishes a common vocabulary for terms and definitions for determining the functions and characteristics of brush-holders. Covers arrangements of brushes and boxes, pressure systems and characterist...

发布日期：1977-01-01  实施日期：1977-01-01

EN 60034-30-2009

Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code)

SJ 20344/1-2002

J230LWX01型无刷直流力矩电动机详细规范

Torque motor, brushless direct current, type J230LWX01, detail specification for

发布日期：2002-10-30  实施日期：2003-03-01

IEC 61810-1-2008

基础机电继电器 第1部分:一般要求

Electromechanical elementary relays. Part 1:General requirements Edition 3.0

适用范围：This part of IEC 61810 applies to electromechanical elementary relays (non-specified time allor-nothing relays) for incorporation into equipment. It defines the basic functionalrequirements and safety-...

实施日期：2008-02-01

GB/T 4772.2-1999

旋转电机尺寸和输出功率等级 第2部分:机座号355～1000和凸缘号1180～2360

Dimensions and output series for rotating electrical machines--Part 2:Frame numbers 355 to 1000 and flange numbers 1180 to 2360

适用范围：本标准适用于以下三种专门型式之一的各类卧式旋转电机——底脚向下电机、底脚向上电机和带整块底板的电机，以及具有安装凸缘，且中心高转换为底脚向下型式为355～1000mm和固定凸缘基圆直径为1180～2360mm的电机。

发布日期：1999-02-26  实施日期：1999-09-01

DIN 42021-2-1976

步进电机；概念、符号、单位和特性曲线

Step motors; definitions, symbols, units and characteristics

适用范围：Step motors; definitions, symbols, units and characteristicsDiese Norm entspricht einer Vereinbarung des Comité de coordination des Constructeurs de Machines Tournantes Electriques du Marché Commun (CO...

GB/T 11706-1989

船舶机舱辅机振动烈度测量方法

Measurement method of vibration for marine engine room auxiliaries

适用范围：本标准规定了柴油发电机、汽轮发电机、空压机、制冷机、泵、通风机和分油机等船舶机舱辅机的振动测量方法。本标准适用于机舱辅机正常工作状态下的振动测量。本标准不适用于寻找振源，诊断故障，研究局部振动或其他研究目的。

发布日期：1989-10-14  实施日期：1990-04-30

DL/T 591-1996

火力发电厂汽轮发电机的热工检测控制技术导则

Directives of thermal instrumentation and control for turbo-generator in power plant

发布日期：1996-03-04  实施日期：1996-06-01

CNS 2322-1964

电机用刷之尺度

Dimensions of Brushes for Electric Machines

发布日期：1964-07-07  实施日期：1964-07-07

GB/T 10069.2-1988

旋转电机噪声测定方法及限值 噪声简易测定方法

Measurement of dirborne noise emitted by rotating electrical machinery and the noise limits--Survey method for the measurement of airborne noise

实施日期：1989-06-30

DIN V 42962-1-2010

Arrangement of terminals for rotating electrical machines - Part 1: Rated voltage 6, 6 kV

实施日期：2010-05-01

IEC 61241-0-2004

可燃性粉尘环境用电气设备 第0部分:一般要求

Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements

适用范围：Specifies general requirements for the design, construction, testing and marking of electrical apparatus protected by any recognized safeguard technique for use in areas where combustible dust may be p...

发布日期：2004-07-07  实施日期：2004-07-07

IEC 60034-18-21-1992

旋转电机 第18部分:绝缘结构功能性评定 第21节:散绕组试验规程 热评定和分级

Rotating Electrical Machines Part 18:Functional Evaluation of Insulation Systems Section 21:Test Procedures for Wire-Wound Windings. Thermal Evaluation and Classification Machines electriques tournante...

实施日期：1992-07-01

IEC/TS 60034-18-41-2006

Rotating electrical machines. Part 18-41:Qualification and type tests for Type I electrical insulation systems used in rotating electrical machines fed from voltage converters Machines électriques tournantes. Partie 18-41:Qualification et essais de type des systèmes d’isolation de type I utilisés dans des machines alimentées par convertisseurs de tension Edition 1

实施日期：2006-10-01

JY 115-1982

感应起电机（试行）

适用范围：本标准适用于J2310型感应起电机。

GB/T 4772.2-1984

电机尺寸及公差 机座号355-1000的电机

Dimensions and tolerances for rotating electrical machines--Machines with frame numbers 355 to 1000

ASTM A469/A469M-2007(2012)

发电机转子用经真空处理钢锻件的规格

Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors

适用范围：<p id="s00002">1.1 This specification covers vacuum-treated basic electric steel forgings for generator rotors. </p> <p id="s00003">1.2 Supplementary requirements are provided, both in this standard an...

实施日期：2007-03-01

BS EN 50308-2004

风轮机.防护措施.设计、运行和维护要求

Windenergieanlagen. Schutzmassnahmen. Anforderungen fuer Konstruktion,Betrieb und Wartung Wind turbines Protective measures Requirements for design,operation and maintenance Aerogenerateurs. Mesures de...

适用范围：This European Standard specifies requirements for protective measures relating to the health and safety of personnel, relevant to commissioning, operation and maintenance of wind turbines. It does not ...

实施日期：2004-09-22