BS 90-1975

直接作用的电记录仪表及其附件规范

Direkt wirkende elektrische Aufnahmegeraete und Zubehoer. Spezifikation Specification for Direct-acting electrical recording instruments and their accessories Instruments d'enregistrement electriques a...

适用范围：Defines and classifies accuracy classes, methods of determining intrinsic error and variations for measured quantity and time-keeping, lists influence quantities, electrical and mechanical requirements...

实施日期：1975-02-28

ZB T68003-1990

拖拉机,内燃机用电磁式电流表

实施日期：1991-01-01

DIN EN 62056-21-2003

电表 读数,电费和负荷控制的数据交换 第21部分:直接本地数据交换

Electricity metering - Data exchange for meter reading, tariff and load control - Part 21: Direct local data exchange

适用范围：This standard describes hardware and protocol specifiations for local meter data exchange. In such systems, a hand-held unit (HHU) or a unit with equivalent functions is connected to a tariff device or...

实施日期：2003-01-01

IEC 61000-4-11-2004

电磁兼容(EMC) 第4-11部分:试验和测量技术 电压暂降、短时中断和电压变化的抗扰度试验

Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests

适用范围：This part of IEC 61000 defines the immunity test methods and range of preferred test levels for electrical and electronic equipment connected to low-voltage power supply networks for voltage dips, shor...

发布日期：2004-03-24  实施日期：2004-03-24

NF C42-145-1994

Electrical measuring instruments. X-T recorders. Part 1 : definitions and requirements.

CNS 5796-1987

汽车用电流表

Ammeters for Automobiles

发布日期：1980-07-09  实施日期：1987-08-18

EN 62052-21-2004

Electricity metering equipment (a.c.) - General requirements, tests and test conditions Part 21: Tariff and load control equipment (IEC 62052-21):2004; Partially supersedes EN 61037:1992 + A1:1996 + A2:1998& EN 61038:1992 + A1:1996 + A2:1998

IEC 62058-11-2008

电能测量设备(交流) 验收检查 第11部分:一般验收检查方法

Electricity metering equipment (AC) - Acceptance inspection - Part 11: General acceptance inspection methods

适用范围：IEC 62058-11:2008 specifies the general acceptance inspection methods which apply to newly manufactured electricity meters produced and supplied in lots of 50 and above. This publication is of high rel...

发布日期：2008-09-18  实施日期：2008-09-18

GB 3048.6-1983

电线电缆 绝缘电阻试验方法 电压-电流法

Electric wires and cables--Test methods for determining insulation resistance--Voltmeter-ammeter method

JJG (航空) 045-1989

钳形表检定规程

IEC 62059-31-1 CORR 1-2008

勘误表1 电计量设备 可靠性 第31-1部分:增加可靠性测试 提高温度和湿度

CORRIGENDUM 1 Electricity metering equipment. Dependability. Part 31-1:Accelerated reliability testing. Elevated temperature and humidity

实施日期：2008-12-01

DIN 18013-2010

Recesses for meter boards (electric meters)

实施日期：2010-11-01

GB 4793.2-2001

测量、控制及实验室用电气设备的安全 电工测量和试验用手持电流钳的特殊要求

Safety requirements for electrical equipment for measurement,control and laboratory use-Particular requirements for hand-hekd current clamp for electrical measurement and test

实施日期：2002-06-01

ANSI/ISA 61010-031-2007

Safety Requirements for Electrical Equipment for Measurement, Control, & Laboratory Use (IEC 61010-2-031)

发布日期：2007-03-28 

EN ISO 17657-3-2007

Resistance welding. Welding current measurement for resistance welding. Part 3:Current sensing coil

实施日期：2007-06-01

NF C44-059-41-2006

Electricity metering equipment - Dependability - Part 41 : reliability prediction.

NF C42-725/A1-2008

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031 : safety requirements for hand-held probe assemblies for electrical measurement and test.

IEC 61010-2-032-2012

测量、控制和实验室使用电子设备安全要求 第2-032部分:手工电流传感器试验和测量特殊要求

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and...

适用范围：IEC 61010-2-032:2012 specifies safety requirements for HAND-HELD and hand-manipulated current sensors described below. These current sensors are for measuring, detecting or injecting current, or indica...

发布日期：2012-09-26  实施日期：2012-09-26

IEC 61000-4-28-1999

电磁兼容性(EMC) 第4-28部分:试验和测量技术 电力频率变化,抗绕度试验

Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test

适用范围：Establishes a reference for evaluating the immunity of electric and electronic equipment when subjected to variations of the power frequency. Only conducted phenomena are considered, including immunity...

发布日期：1999-11-25  实施日期：1999-11-25

EN 60051-2-1989

Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 2: Special Requirements for Ammeters and Voltmeters [Superseded: CENELEC HD 233]