NF A89-572-2006

Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross tension testing.

EN 1592-2-1997

Aluminium and Aluminium Alloys. HF Seam Welded Tubes. Part 2:Mechanical Properties

实施日期：1997-10-01

IEC 60050-851-2008

国际电工词汇 第851章:电焊

International Electrotechnical Vocabulary - Part 851: Electric welding

适用范围：IEC 60050-851:2008, which is a part of the IEV, defines terms specifically relevant to electric welding. This second edition cancels and replaces the first edition published in 1991. This edition const...

发布日期：2008-06-11  实施日期：2008-06-11

BS EN ISO 14171-2010

Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels. Classification

实施日期：2010-10-31

EN ISO 14343-2009

Welding consumables. Wire electrodes,strip electrodes,wires and rods for arc welding of stainless and heat resisting steels. Classification

实施日期：2009-11-01

GB 15579.1-2013

弧焊设备 第1部分：焊接电源

Arc welding equipment - Part 1: Welding power sources

适用范围：GB 15579的本部分规定了弧焊电源以及等离子切割系统的安全要求和性能要求。本部分适用于为工业和专业用途而设计的由不超过IEC 60038中表1规定的电压供电或由机械设备驱动的弧焊和类似工艺所用的电源。本部分不适用于主要...

发布日期：2013-11-12  实施日期：2014-08-07

EN ISO 17657-2-2007

Resistance welding. Welding current measurement for resistance welding. Part 2:Welding current meter with current sensing coil

实施日期：2007-06-01

ISO 12153-2011

焊接耗材 镍和镍合金的气保护与非气保护金属电弧焊用管状芯焊条 分类

Welding consumables -- Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys -- Classification

适用范围：ISO 12153:2011 specifies requirements for the classification of tubular cored electrodes for metal arc welding with or without a gas shield of nickel and nickel alloys. It includes those compositions i...

发布日期：2011-04-01  实施日期：2011-04-01

BS EN 28430-3-1992

点焊.电极夹具.第3部分:端推力直柄接头

Specification for resistance spot welding. Electrode holders. Parallel shank fixing for end thrust

适用范围：Dimensions and tolerances of resistance spot welding electrode holders (type C) without offset and with a facility for cable clamping.

GB 15579.5-2013

弧焊设备 第5部分：送丝装置

Arc welding equipment - Part 5: Wire feeders

适用范围：GB 15579的本部分规定了弧焊和类似工艺所用送丝装置的安全要求和性能要求。送丝装置与焊接电源之间可以是分体式的,也可以是一体式的。送丝装置可与手工焊炬或机械导向的焊炬配套使用。本部分不适用于IEC 60974-7中带焊丝...

发布日期：2013-11-12  实施日期：2014-08-07

DIN ISO 693-1985

缝焊轮坯尺寸

Dimensions of seam welding wheel blanks; identical with ISO 693, edition 1982

适用范围：This standard specifies the outside diameter and thickness of blanks for seam welding wheels.

DIN 17565-2004

铬铁、铬铁硅和铬 交货技术条件

Ferro-chromium, Ferro-chromium-silicon and Chromium - Technical Conditions of Delivery

DIN EN ISO 6847-2013

焊接消耗品.化学分析用焊接金属块的沉积

Welding consumables – Deposition of a weld metal pad for chemical analysis (ISO 6847:2013)

发布日期：2013-11-01  实施日期：2013-11-01

NF A85-009-12-1997

Arc welding equipment. Part 12 : coupling devices for welding cables.

EN ISO 14329-2003

Resistance welding Destructive tests of welds Failure types and geometric measurements for resistance spot,seam and projection welds ISO 14329:2003

实施日期：2003-07-17

BS EN ISO 14744-5-2001

焊接 电子束焊接机械的验收检验 第5部分:偏转精度的测量

Schweissen. Abnahmepruefung von ElektronenstrahlSchweissmaschinen. Messen der Fuehrungsgenauigkeit Welding-Acceptance Inspection of Electron Beam Welding Machines-Part 5:Measurement of Run-Out Accuracy...

适用范围：This standard is intended for use when the run-out accuracy of the moving parts of electron beam welding machines complying with EN ISO 14744-1 is to be measured in connection with an acceptance inspec...

实施日期：2001-04-15

ISO 17657-2-2005

电阻焊 电阻焊的焊接电流测量 第2部分:电流感应线圈式焊接电流计

Resistance welding -- Welding current measurement for resistance welding -- Part 2: Welding current meter with current sensing coil

适用范围：ISO 17657-2:2005 specifies a welding current meter with a current sensing coil to measure the weld time and the r.m.s. value of the welding current during a certain interval using single phase alternat...

发布日期：2005-09-01  实施日期：2005-09-01

ISO 17846-2004

焊接和相关工艺 卫生和安全 电弧焊和切割用设备与熔化电极的图示标签

Welding and allied processes -- Health and safety -- Wordless precautionary labels for equipment and consumables used in arc welding and cutting

适用范围：ISO 17846:2004 specifies the format and symbols for wordless precautionary labels placed by manufacturers on their equipment and consumables used in arc welding, plasma arc cutting, and thermal/flame c...

发布日期：2004-05-01  实施日期：2004-05-01

GB/T 8110-2008

气体保护电弧焊用碳钢、低合金钢焊丝

Welding electrodes and rods for gas shielding arc welding of carbon and low alloy steel

适用范围：本标准规定了气体保护电弧焊用碳钢、低合金钢实心焊丝和填充丝的分类和型号、技术要求、试验方法、检验规则、包装、标志及品质证明书。　　本标准适用于熔化极气体保护电弧焊、钨极气体保护电弧焊及等离子弧焊等焊接用碳钢、低合...

发布日期：2008-06-26  实施日期：2009-01-01

EN ISO 5182-2009

Resistance welding. Materials for electrodes and ancillary equipment

实施日期：2009-04-01