EN 60885-3-2003

Electrical test methods for electric cables Part 3: Test methods for partial discharge measurements on lengths of extruded power cables IEC 60885-3:1988

IEC/PAS 62326-20-2011

印制电路板 第20部分:高亮度发光二极管用电子线路板

Printed boards. Part 20:Electronic circuit board for high-brightness LEDs

适用范围：This PAS specifies the properties of the electronic circuit board for high-brightness LEDs(hereafter described as “ECB”).

发布日期：2011-01-26  实施日期：2011-01-26

NF C90-201-1-2002

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1 : general requirements, frequency bands and electromagnetic disturbances.

IEC 60749-12 CORR 1-2003

半导体器件 机械和气候试验方法 第12部分:振动、可变频率 勘误表1

SEMICONDUCTOR DEVICES. MECHANICAL AND CLIMATIC TEST METHODS. Part 12:Vibration,variable frequency CORRIGENDUM 1

适用范围：This is Technical Corrigendum 1 to IEC 60749-12-2002 (Semiconductor devices -Mechanical and climatic test methods -Part 12:Vibration, variable frequency)

实施日期：2003-08-01

JB/T 5452.2-1991

仪器仪表用电子元器件产品规范 步进电机专用控制电路SJ0303CP(SJ0303CD)

实施日期：1992-07-01

CNS 10850-2000

印刷电路板通则

General Rules for Printed Wiring Boards

发布日期：1984-04-17  实施日期：2000-10-24

IEC 62591-2010

工业通信网络 无线通信网络和通信协议 WirelessHART

Industrial communication networks. Wireless communication network and communication profiles. WirelessHART Edition 1.0

适用范围：This International Standard specifies an additional Type 20 communication network toIEC 61158-5-20, IEC 61158-6-20 and a Communication Profile CP 9/2 in addition toIEC 61784-1 CPF 9.This standard speci...

发布日期：2010-04-27  实施日期：2010-04-01

JIS X6332-1999

光学存储卡－线性记录法－信息交换用数据格式

Identification cards -- Optical memory cards -- Linear recording method -- Data format for information interchange

适用范围：この規格は，ISO/IEC 11694-1，ISO/IEC 11694-2, ISO/IEC 11694-3及びISO/IEC 11694-4で規定される光メモリカード(以下，カードという。)の直線記録方式で情報を記録する際の情報交換用データ様式について規定する。

QJ 2707-1995

印制电路板计算机辅助设计光绘照相原版技术条件

发布日期：1995-04-26  实施日期：1995-10-26

DIN EN 61076-4-108-2002

电子设备用连接器 第4-108部分:有质量评定的印制电路板接插件 模数节距25mm、具有IEC 60917-1规定2.5 mm基本网格、可用于15 mm侧向填充密度的集成屏蔽功能的电缆与板连接件的详细规范

Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality; Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shield...

实施日期：2002-12-01

ISO/IEC 8473-3-1995

信息技术 提供无连接方式网络服务的协议:由X.25子网提供低层服务

Information technology -- Protocol for providing the connectionless-mode network service: Provision of the underlying service by an X.25 subnetwork

适用范围：Specifies the way in which the underlying service assumed by the protocol defined by ITU-T Rec. X.233 ISO/IEC 8473-1 is provided by a subnetwork that conforms to ITU-T Recommendation X.25 through the o...

发布日期：1995-03-01  实施日期：1995-03-01

IEEE 802.15.4E-2012

Local and metropolitan area networks. Part 15.4:Low-Rate Wireless Personal Area Networks (LR-WPANs) Amendment 1:MAC sublayer IEEE Computer Society

实施日期：2012-02-06

DIN EN 13321-2-2007

Open data communication in building automation, controls and building management - Home and building electronic systems - Part 2: KNXnet/IP Communication

实施日期：2007-01-01

IEC 60603-11-1992

印制板用频率低于3MHz的连接器 第11部分:同轴连接器详细规范(活动式连接器和固定式连接器尺寸)

Connectors for frequencies below 3 MHz for use with printed boards - Part 11: Detail specification for concentric connectors (dimensions for free connectors and fixed connectors)

适用范围：Covers concentric connectors for use in LF (low-frequency) audio applications such as the interconnection of headphones and microphones in sound system components. Specifies the dimensions, general req...

发布日期：1992-03-15  实施日期：1992-03-15

ISO 17356-2-2005

道路车辆 汽车内置应用的开放式接口 第2部分:绑定OS、COM和NM的OSEK、VDX规范

Road vehicles open interface for embedded automotive applications. Part 2:Osek/vdx specifications for binding os,com and nm first edition

适用范围：This part of ISO 17356 gives the OSEK/VDX specifications for binding the OS (operating system), COM (communications) and NM (network management) of the open interface for embedded automotive applicatio...

实施日期：2005-05-01

BS EN 50288-8-2012

Multi-element metallic cables used in analogue and digital communication and control. Specification for type 1 cables characterised up to 2 MHz

发布日期：2012-03-31 

BS EN 60603-13-1998

印制电路板用频率低于3MHz的连接器.不易卸绝缘可置换终端用带独立连接器的2.54mm(0.1in)基本网格印制板用经质量评定的两对端连接器详细规范

Steckverbinder fuer gedruckte Schaltungen fuer Frequenzen unter 3 MHz. Bauartspezifikation fuer guetebestaetigte indirekte Steckverbinder fuer gedruckte Schaltungen mit Raster 2,54 mm (0,1 in),mit frei...

适用范围：This part of IEC 603 covers a range of two-part connectors with contact arrangements having spacings of 2,54 mm (0,1 in) in both directions. The two-part connector range comprises a fixed (board-mounte...

实施日期：1998-05-15

DIN ETS 300213-1993

网络形状(NA);大城市区域网络(MAN)

Network Aspects (NA); Metropolitan Area Network (MAN); physical layer convergence procedure for 2,048 Mbit/s; English version ETS 300213:1992

适用范围：The document deals with the physical layer convergence procedure at 2,048 Mbit/s for use in the context of a subnetwork of a metropolitan area network.#,,#

ANSI T1.105.07-1996

See ATIS T1.105.07

DIN EN 60870-6-701-1999

遥控设备和系统.第6-701部分:遥控协议兼容ISO标准和ITU-T建议.功能结构为提供TASE.1应用于终端系统服务

Telecontrol equipment and system - Part 6-701: Telecontrol protocols compatible with ISO standards and ITU-T recommendations; functional profile for providing the TASE.1 application service in end syst...

实施日期：1999-12-01