ISO 14327-2004

电阻焊 测量电阻点焊、凸焊和滚道焊的可焊性图

Resistance welding -- Procedures for determining the weldability lobe for resistance spot, projection and seam welding

适用范围：ISO 14327:2004 specifies procedures for determining the weldability lobe for producing quality welds. The tests are used in particular to determine the weldability lobe for coated/uncoated steels, stai...

发布日期：2004-04-01  实施日期：2004-04-01

EN ISO 14554-1-2000

Quality Requirements for Welding. Resistance Welding of Metallic Materials. Part 1:Comprehensive Quality Requirements ISO 14554-1:2000

实施日期：2000-04-01

BS EN ISO 5828-2001

电阻焊设备.连接水冷耳的接线柱用的辅助电缆.尺寸和特征

Widerstandsschweisseinrichtungen. SekundaerAnschlussleitungen mit wassergekuehlten Kabelschuhen. Masse und Kennwerte Resistance Welding Equipment-Secondary Connecting Cables with Terminals Connected to...

适用范围：This International Standard specifies dimensions and characteristics of secondary connecting cables which are air-cooled over their length and with terminals connected to water-cooled lugs. The seconda...

实施日期：2001-05-15

NF A89-579-2-2007

Resistance welding - Welding current measurement for resistance welding - Part 2 : welding current meter with current sensing coil.

BS EN 25184-1995

直线电阻点焊电极

Straight resistance spot welding electrodes

适用范围：Dimensions and tolerances.

ISO 6210-1-1991

机器人电阻焊枪气瓶 第1部分:一般要求

Cylinders for robot resistance welding guns -- Part 1: General requirements

适用范围：Specifies requirements for geometrical and mechanical characteristics of cylinders and their manufacturing, delivery and test specifications. Gives nominal forces at the piston rod, nominal strokes, an...

发布日期：1991-06-30  实施日期：1991-06-30

DIN EN 62135-1-2009

电阻焊设备 第1部分:设计、制造和安装的安全要求

Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation

实施日期：2009-07-01

ISO 10447-2006

电阻焊 电阻点焊与凸焊的剥离和凿削试验

Resistance welding -- Peel and chisel testing of resistance spot and projection welds

适用范围：ISO 10447:2006 specifies the procedure and recommended tooling to be used for testing resistance spot and projection welds by means of peel and chisel tests. ISO 10447:2006 applies to welds made in two...

发布日期：2006-07-01  实施日期：2006-07-01

NF A87-002-2007

Resistance welding - Spot welding of aluminium and aluminium alloys - Weldability, welding and testing.

NF A89-577-2007

Resistance welding - Procedure for seam welding of uncoated and coated low carbon steels.

EN ISO 14270-2001

Specimen Dimensions and Procedure for Mechanized Peel Testing Resistance Spot,Seam and Embossed Projection Welds ISO 14270:2000

实施日期：2001-10-01

NF F50-587-3-2012

Railway applications - Track - Flash butt welding of rails - Part 3 : welding in association with crossing construction.

NF A82-198-1992

Resistance spot welding equipment. Cooling tubes.

DIN EN ISO 5182-2009

电阻焊 电极和辅助设备用材料

Resistance welding - Materials for electrodes and ancillary equipment

适用范围：This International Standard specifies the characteristics of materials for resistance welding electrodes andancillary equipment which are used for carrying current and transmitting force to the work.

实施日期：2009-08-01

ISO 8430-1-1988

电阻点焊－电极夹具－第１部分:装配锥度1:１０

Resistance spot welding -- Electrode holders -- Part 1: Taper fixing 1:10

适用范围：Specifies the dimensions and tolerances of resistance spot welding electrode holders (type A) without offset and with the facility for cable clamping, and where a male taper 1:10 is used to fix the hol...

发布日期：1988-12-01  实施日期：1988-12-01

NF A87-082-1992

Projections for resistance welding.

ISO 17677-1-2009

电阻焊 词汇 第1部分:点焊、凸焊和缝焊

Resistance welding -- Vocabulary -- Part 1: Spot, projection and seam welding

适用范围：ISO 17677-1:2009 establishes a vocabulary of terms and definitions for resistance spot welding, projection welding and seam welding.

发布日期：2009-07-01  实施日期：2009-07-01

ISO 14323-2006

电阻点焊和凸焊 焊接头破坏性试验 试样尺寸和冲击剪切试验与十字拉力试验程序

Resistance spot welding and projection welds -- Destructive testing of welds -- Specimen dimensions and procedure for impact shear test and cross-tension testing

适用范围：ISO 14323:2006 covers destructive testing of welds. ISO 14323:2006 specifies specimen dimensions and testing procedures for impact shear and cross-tension testing of spot and embossed projection welds ...

发布日期：2006-05-01  实施日期：2006-05-01

EN ISO 18592-2009

Resistance welding. Destructive testing of welds. Method for the fatigue testing of multi-spot-welded specimens

实施日期：2009-12-01

DIN ISO 857-2-2007

Welding and allied processes - Vocabulary - Part 2: Soldering and brazing processes and related terms (ISO 857-2:2005)

实施日期：2007-03-01