NF E22-131-1986

内径定心平行边圆柱形花键 尺寸,公差和检验

Straight-sided splines for cylindrical shafts with internal centering. Dimensions, tolerance and verification.

实施日期：1986-04-01

BS 2059/2-1957

Summary sheet: straight sided splines. Bottom fitting. Deep

BS 2059/3-1957

Summary sheet: straight sided serrations. Internal and external

ISO 14-1982

圆柱轴用小径定心矩形花键. 尺寸, 公差和检验

Straight-sided splines for cylindrical shafts with internal centering -- Dimensions, tolerances and verification

适用范围：Contains table indicating tolerances on holes and shafts as well as on symmetry, gives directions for gauging such as gauging conditions and gauging control, and specifies control methods and correspon...

发布日期：1982-10-01  实施日期：1982-10-01

DIN ISO 14-1986

内定心式柱形轴的直边花键. 尺寸, 公差和检验

Straigth-sided splines for cylindrical shafts with internal centering; dimensions, tolerances and verification; identical with ISO 14, edition 1982

适用范围：This standard lays down dimensions, in millimetres, of straigth-sided splines for cylindrical shafts with internal centering, light series and medium series. It also specifies control methods and corre...

BS 2059-1953

直边花键与锯齿形花键规范

Geradwandige Keile und Keilverzahnungen. Spezifikation Straight-sided splines and serrations Cannelures et stries a cotes droits. Specification AMD 1843:April 1954;Supersedes BS 46:Part 2:1929,BS 5015:...

适用范围：Dimensions of internal and external splines and of Full Form $7Igo$7R gauges and $7Inot go$7R feature gauges. Dimensions for straight-sided 90<deg> serrations, line size $9H in to 6 in, serration $9D i...

实施日期：1953-12-31

NF E22-151-1967

直齿花键 圆柱轴和轴套

Cylindrical straight-sided serrations.

实施日期：1967-01-01

BS 2059/1-1957

Summary sheet: straight sided splines. Bottom fitting. Shallow

BS 8420-2003

用直尺和楔测量公路,人行道和其他铺路表面不规则程度的方法

Methods of measuring irregularities on surfaces of roads, footways and other paved areas using straightedges and wedges

适用范围：This British Standard describes methods of measuring irregularities on surfaces of roads, footways and other paved and trafficked areas using straightedges and wedges other than those described in BS E...

BS 5686-1986

圆柱轴的直边花键规范:米制公称尺寸、公差和测量要求

Keilwellen-Verbindungen mit parallelen Flanken;Nennmasse,Toleranzen und Messinstrumente Straight-sided splines for cylindrical shafts:metric nominal dimensions,tolerances and gauging requirements Canne...

适用范围：Straight-sided splines for cylindrical shafts with internal centering, light and medium series.

实施日期：1986-08-28

JIS B1601-1996

矩形花键－小口径配合－尺寸、公差及检验方法

Straight-sided splines for cylindrical shafts with internal centering -- Dimensions, tolerances and verification

GB/T 10952-2005

矩形花键滚刀

Hobs for parallel side splines

适用范围：本标准规定了A级和B级矩形花键滚刀的型式尺寸、技术要求、标志、包装的基本要求。　 本标准规定了A级滚刀适用于加工符合GB/T 1144-2001、键宽公差带为d10、f9、h10，定心直径留有磨量的外花键。　 本标准规定的B级滚刀适用于加工...

发布日期：2005-05-18  实施日期：2005-12-01

GB/T 1144-2001

矩形花键尺寸、公差和检验

Straight-sided spline--Dimensions，tolerances and verification

适用范围：本标准规定了圆柱直齿小径定心矩形花键的基本尺寸、公差与配合、检验规则和标记方法及其量规的尺寸公差和数值表。　本标准适用于矩形花键及其量规的设计、制造与检验。

发布日期：2001-12-17  实施日期：2002-06-01

GB/T 10952-1989

矩形花键滚刀

Hobs for parallel side splines

实施日期：1990-01-01

GB/T 1144-1987

矩形花键尺寸、公差和检验

Straight-sided spline--Dimensions, tolerances and verification

GB/T 10081-2005

矩形内花键长度系列

Straight-sided internal splines Length series

适用范围：本标准规定了矩形内花键的长度系列。 　　本标准适用于符合GB/T 1144规定的内花键。

发布日期：2005-05-16  实施日期：2005-12-01

DIN 5466-1-2000

花键连接.负荷计算.第1部分:通用基础

Splined joints, calculation of load capacity - Part 1: General basis

GB/T 10081-1988

矩形内花键 长度系列

Straight-sided internal spline--Length series

适用范围：本标准规定了矩形内花键的长度系列。 本标准适用于符合GB 1144规定的内花键。

发布日期：1988-12-10  实施日期：1989-10-01