ASTM D2924-2012

玻璃纤维增强热固树脂管(玻璃纤维)抗外部压力性能的测试方法

Standard Test Method for External Pressure Resistance of “Fiberglass(Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

实施日期：2012-10-01

NF P18-341-2/IN1-2012

Admixtures for concrete, mortar and grout - Part 2 : concrete admixtures - Definitions, requirements, conformity, marking and labelling.

SY/T 0321-2000

钢质管道水泥砂浆衬里技术标准

Technical standard of cement mortar lining of steel pipeline

适用范围：本标准适用于油田外径不小于60.3mm的钢质输水管道衬里的设计、施工及验收。所输送水的pH值不得低于5，且温度不宜高于60℃。

实施日期：2000-10-01

ASTM C1063-2012c

内外侧置放硅酸盐水泥基灰泥的板条和衬条的安装规范

Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster

实施日期：2012-08-15

TB/T 2922.3-1998

铁路浑凝土用骨料碱活性试验方法 砂浆棒法

实施日期：1998-11-01

EN 480-10-2009

混凝土、灰浆和灌浆混合物.试验方法.水溶解氯化物的含量测定

Admixtures for concrete,mortar and grout. Test methods. Part 10:Determination of water soluble chloride content

实施日期：2009-07-01

JG/T 336-2011

混凝土结构修复用聚合物水泥砂浆

Polymer modified cement mortars for concrete structures repair

适用范围：本标准规定了混凝土结构修复用聚合物水泥砂浆（代号 PCMR ）的术语和定义、分类和标记、原材料、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于混凝土结构修复用聚合物水泥砂浆。

发布日期：2011-11-25  实施日期：2012-05-01

DG/TJ 08-2021-2007

商品砌筑砂浆现场检测技术规程(附条文说明)

The specification code for site testing of manufactured masonry mortar

实施日期：2007-09-01

JGJ/T 220-2010

抹灰砂浆技术规程（附条文说明）

Technical specification for plasting mortar

发布日期：2010-07-23  实施日期：2011-03-01

NF P12-319-1999

Methods of test for mortar for masonry. Part 19 : determination for water vapour permeability of hardened rendering and plastering mortars.

NF P72-400-2-2005

Gypsum binders and gypsum plasters - Part 2 : test methods.

BS EN 1344-2013

Clay Pavers - Requirements and Test Methods - CORR: September 30, 2015

发布日期：2013-11-30  实施日期：2013-11-30

ISO 13007-4-2010

瓷砖 灰浆和胶粘剂 第4部分:灰浆试验方法

Ceramic tiles -- Grouts and adhesives -- Part 4: Test methods for grouts

适用范围：ISO 13007-4:2010 describes methods for determining characteristics of grouts used in the installation of ceramic tiles. The test methods described are determination of flexural and compressive strength...

发布日期：2010-09-01  实施日期：2010-09-01

ASTM D2992-2012

玻璃增强热固树脂(玻璃纤维)管及配件用液压或压力设计基础的获得规程

Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass(Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings

适用范围：<p>This practice is useful for establishing the hoop stress or internal pressure versus time-to-failure relationships, under selected internal and external environments which simulate actual anticipate...

实施日期：2012-04-01

SY/T 4074-1995

钢质管道水泥砂浆衬里涂敷机涂敷工艺

Process of cement mortar ining with coating machine on the inside surface of steel pipes

适用范围：本标准适用于公称直径为400mm以上的钢质管道水泥砂浆衬里涂敷机涂敷的施工。

实施日期：1995-09-01

NF P41-034-3-2008

Influence of cementitious products on water intended for human consumption - Test methods - Part 3 : migration of substances from factory-made cementitious products.

CECS 10-1989

埋地给水钢管道水泥砂桨衬里技术标准

CEMENT MORTAR LINING FOR BURIED STEEL WATER PIPELINE TECHNICAL STANDARD

实施日期：1989-11-27

JGJ 253-2011

无机轻集料砂浆保温系统技术规程(附条文说明)

Technical specification for thermal insulating systems of inorganic lightweight aggregate mortar

适用范围：为规范无机轻集料砂浆保温系统墙体保温工程技术要求，保证工程质量，做到技术先进、安全可靠、经济合理，制定本规程。 本规程适用于以混凝土和砌体为基层墙体的民用建筑工程中，采用无机轻集料砂浆保温系统的墙体保温工程的...

发布日期：2011-11-22  实施日期：2012-06-01

NF P72-410-1-2005

Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 1 : definitions and requirements.

ASTM C905-2001(2012)

Standard Test Methods for Apparent Density of Chemical-Resistant Mortars,Grouts,Monolithic Surfacings,and Polymer Concretes

实施日期：2001-02-10