NF S98-101-1-2007

Sterilization of health care products - Ethylene oxide - Part 1 : requirements for development, validation and routine control of a sterilization process for medical devices.

ISO 9241-400-2007

人机交互的人类工效学 第400部分:物理输入设备的原理和要求

Ergonomics of human--system interaction -- Part 400: Principles and requirements for physical input devices

适用范围：ISO 9241-400:2006 gives guidelines for physical input devices for interactive systems. It provides guidance based on ergonomic factors for the following input devices: keyboards, mice, pucks, joysticks...

发布日期：2007-02-01  实施日期：2007-02-01

ASTM D2992-2012

玻璃增强热固树脂(玻璃纤维)管及配件用液压或压力设计基础的获得规程

Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass(Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings

适用范围：<p>This practice is useful for establishing the hoop stress or internal pressure versus time-to-failure relationships, under selected internal and external environments which simulate actual anticipate...

实施日期：2012-04-01

EJ/T 1118-2000

核电厂控制室设计验证和确认

Main control room-Verification and validation of design MOD

实施日期：2001-08-01

NF X35-122-143-2012

Ergonomics of human-system interaction - Part 143 : forms.

BS EN ISO 11137-1-2006

Sterilisation von Produkten fuer die Gesundheitsfuersorge. Strahlen. Anforderungen an die Entwicklung,Validierung und Lenkung der Anwendung eines Sterilisationsverfahrens fuer Medizinprodukte Sterilization of health care products Radiation Part 1:Requirements for development,validation and routine control of a sterilization process for medical devices Sterilisation des produits de sante. Irradiation. Exigences relatives a la mise au point,a la validation et au controle de routine d'un procede de

实施日期：2006-08-31

BS EN ISO 10360-6-2001

几何产品规范(GPS) 坐标测量机(CMM)的验收和复检试验 第6部分:计算高斯相关特征的误差估算

Geometrische Produktspezifikation (GPS). Annahmepruefung und Bestaetigungspruefung fuer Koordinatenmessgeraete (KMG). Abweichungsabschaetzung beim Berechnen zugeordneter Geometrieelemente nach Gauss Ge...

适用范围：Coordinate measuring machines, Linear measuring instruments, Coordinates (mathematics), Analytical geometry, Product specification, Acceptance (approval), Approval testing, Verification, Error analysis...

实施日期：2001-10-15

EJ/T 617-1991

核工业科学和工程计算机程序验证和确认指南

发布日期：1991-10-11  实施日期：1992-03-01

SN/T 3062.1-2011

进口医疗器械灭菌包装 第1部分：成形、密封和装配过程的确认要求

Packing materials for terminally sterilized medical devices for import-Part 1:Validation requirements for forming,sealing and assembly processes

适用范围：本部分不包括无菌制造医疗器械的包装要求。

发布日期：2011-09-09  实施日期：2012-04-01

ISO/IEC 29794-1-2009

信息技术 生物测定样品质量 第1部分:框架

Information technology -- Biometric sample quality -- Part 1: Framework

适用范围：ISO/IEC 29794-1:2009 specifies the derivation, expression and interpretation of biometric sample quality scores and data, and interchange of these scores and data via the multipart ISO/IEC 19794, Infor...

发布日期：2009-08-01  实施日期：2009-08-01

ISO/IEC 19794-1-2006

信息技术 生物测量数据交换格式 第1部分:框架

Information technology -- Biometric data interchange formats -- Part 1: Framework

适用范围：Standardized biometric data interchange formats are crucial to the interoperability of biometric components. ISO/IEC 19794-1:2006 describes general aspects of biometric data interchange formats and spe...

发布日期：2006-04-01  实施日期：2006-04-01

BS EN 442-2-1997

散热器和对流式暖房器规范.试验方法和级别

Radiatoren und Konvektoren. Pruefverfahren und Leistungsangabe Radiators and Convectors-Part 2:Test Methods and Rating Radiateurs et convecteurs. Methodes d'essai et d'evaluation AMD 14742;November 19,...

适用范围：This European Standard defines procedures for determining the standard thermal output of heating appliances fed with water or steam at temperatures below 120 ℃, supplied by a remote heat source. This E...

实施日期：1997-01-15

EN ISO 9241-400-2007

Ergonomics of human-system interaction. Part 400:Principles and requirements for physical input devices

实施日期：2007-02-01

EN 13286-47-2012

Unbound and hydraulically bound mixtures. Part 47:Test method for the determination of California bearing ratio,immediate bearing index and linear swelling

实施日期：2012-04-01

DIN EN ISO 10360-5-2011

产品几何量技术规范(GPS) 坐标测量机(CMM)的验收检测和复检检测 第5部分:使用单探针和多探针接触探测系统的坐标测量机

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using single and multiple stylus contacting probing systems (ISO 10...

实施日期：2011-01-01

DIN 19700-11-2004

蓄水设备 第11部分:蓄水坝

Dam plants - Part 11: dams

适用范围：This standard is applicable together with DIN 19700-10 Planning, construction, operation and maintenance for new and existing dams. Further regulations of DIN 19700-12 have to be observed in case of st...

BS EN ISO 10360-5-2010

几何产品规范(GPS) 坐标测量机(CMM)的验收和复检试验 第5部分:使用多触针探测系统的CMM

Geometrische Produktspezifikation (GPS). Annahmeprüfung und Best?tigungsprüfung für Koordinatenmessger?te (KMG). Prüfung der Antastabweichungen von KMG mit berührendem Messkopfsystem Geometrical produc...

适用范围：This part of ISO 10360 specifies acceptance and periodic reverification tests of CMM performance withcontacting probing systems and is only applicable to CMMs using⎯ any type of contacting probing syst...

实施日期：2010-11-30

DIN EN ISO 9241-400-2007

人机交互的人类工效学 第400部分:物理输入设备的原理和要求

Ergonomics of human-system interaction - Part 400: Principles and requirements for physical input devices (ISO 9241-400:2007)

适用范围：This part of ISO 9241 gives guidelines for physical input devices for interactive systems. It provides guidance based on ergonomic factors for the following input devices: keyboards, mice, pucks, joyst...

实施日期：2007-05-01

ISO 11135-1-2007

医疗保健产品灭菌 环氧乙烷 第1部分:医疗器械灭菌工艺的设定、确认和常规控制的要求

Sterilization of health care products. Ethylene oxide. Part 1:Requirements for development,validation and routine control of a sterilization process for medical devices first edition [superseded:Iso 11...

适用范围：This part of ISO 11135 specifies requirements for the development, validation and routine control of anethylene oxide sterilization process for medical devices.NOTE 1 Although the scope of this part of...

发布日期：2007-04-27  实施日期：2007-05-01

BS EN ISO 11135-1-2007

Sterilisation von Produkten für die Gesundheitsfürsorge. Ethylenoxid. Anforderungen an die Entwicklung,Validierung und Lenkung der Anwendung eines Sterilisationsverfahrens für Medizinprodukte Sterilization of health care products. Ethylene oxide. Part 1:Requirements for development,validation and routine control of a sterilization process for medical devices Stérilisation des produits de sant Oxyde d'éthylène. Exigences de développement,de validation et de contr?le de routine d'un processus de s

实施日期：2007-06-29