ASME RT-1-2009

轻轨车辆车身结构要求的安全性标准

Safety Standard for Structural Requirements for Light Rail Vehicles

适用范围：This Standard applies to car bodies for newly constructed light-rail vehicles for transit passenger service in North America. The Standard defines requirements for the incorporation of passive safety d...

发布日期：2009-09-18  实施日期：2009-09-18

ISO 14200-2012

Space environment (natural and artificial) -- Guide to process-based implementation of meteoroid and debris environmental models (orbital altitudes below GEO + 2 000 km)

发布日期：2012-11-01  实施日期：2012-11-01

ISO 15623-2013

智能运输系统 正向车辆碰撞报警系统 性能要求和试验规程

Intelligent transport systems -- Forward vehicle collision warning systems -- Performance requirements and test procedures

适用范围：ISO 15623:2013 specifies performance requirements and test procedures for systems capable of warning the driver of a potential rear-end collision with other vehicles ahead of the subject vehicle while ...

发布日期：2013-07-01  实施日期：2013-07-01

JB/T 8313-1996

碰撞摩擦火花安全性能试验方法导则

适用范围： 本标准规定了爆炸性气体环境用防爆电气设备零件因相互之间或与外界物体可能发生碰撞摩擦而产生的火花点燃爆炸性气体混合物的试验方法和合格判据。 本标准适用于评价制造防爆电气设备有关零件的各种固体材料的碰...

实施日期：1996-10-01

DIN EN 15227-2008

Railway applications - Crashworthiness requirements for railway vehicle bodies

实施日期：2008-07-01

GB/T 2423.44-1995

电工电子产品环境试验 第2部分:试验方法 试验Eg:撞击 弹簧锤

实施日期：1996-08-01

DIN EN 13546-2007

Protective clothing - Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players - Requirements and test methods

实施日期：2007-09-01

NF S74-557-2004

Stone shields for off-road motorcycling suited to protect riders against stones and debris - Requirements and test methods.

IEC 60052-2002

用标准气隙法测量电压

Voltage measurement by means of standard air gaps

适用范围：Applies to the construction and use of sphere-gaps for measuring the peak value of alternating, direct and both full standard and longer tail impulse voltages. Peak values of the disruptive voltages in...

发布日期：2002-10-15  实施日期：2002-10-15

GB 20071-2006

汽车侧面碰撞的乘员保护

The protection of the occupants in the event of a lateral collision

适用范围：本标准规定了汽车进行侧面碰撞的要求和试验程序，还对车辆型式的变更、三维H点装置、移动变形壁障及侧碰撞假人进行了规定。 　　本标准适用于其质量为基准质量时，最低座椅的R点与地面的距离不超过700mm的M(1)和N(1)类车辆。

发布日期：2006-01-18  实施日期：2006-07-01

BS ISO 15830-1-2013

道路车辆 WorldSID第50百分位男性侧面碰撞假人的设计和性能规范 术语和原理

Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummy. Terminology and rationale

发布日期：2013-05-31  实施日期：2013-05-31

ISO 22839-2013

Intelligent transport systems -- Forward vehicle collision mitigation systems -- Operation, performance, and verification requirements

发布日期：2013-06-01  实施日期：2013-06-01

NF P98-481-1-2011

Road traffic noise reducing devices - Non-acoustic performance - Part 1 : mechanical performance and stability requirements.

BS ISO 13232-2-2005

Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Definition of impact conditions in relation to accident data

实施日期：2006-01-26

DIN 5560-2002

轨道车辆.轻轨交通车辆主体纵向强度

Rail vehicles - Longitudinal strength of bodies of light rail vehicles

BS EN 13330-2013

百叶窗 通道的硬体冲击和预防 试验方法

Shutters. Hard body impact and prevention of access. Test methods

发布日期：2013-06-30  实施日期：2013-06-30

BS ISO 3560-2013

道路车辆 正面固定障碍或柱子碰撞测试规程

Road vehicles. Frontal fixed barrier or pole impact test procedure

发布日期：2013-07-31  实施日期：2013-07-31

ISO 15830-1-2013

Road vehicles -- Design and performance specifications for the WorldSID 50th percentile male side-impact dummy -- Part 1: Terminology and rationale

发布日期：2013-05-01  实施日期：2013-05-01

NF S94-350-2009

可植入的假乳房

Non-active surgical implants - Mammary implants - Particular requirements.

NF C93-400-10-4-2004

Connectors for electronic equipment - Tests and measurements - Part 10-4 : impact tests (free components), static load tests (fixed components), endurance tests and overload tests - Test 10d : electrical overload (connectors).