EN 61120-5-1995

Digital Audio Tape Recorder Reel-to-Reel System, Using 6,3 mm Magnetic Tape, for Professional Use Part 5: Reels (IEC 1120-5 : 1995)

NF C97-250-2-1998

Consummer audio/video equipment. Digital interface. Part 2 : SD-DVCR data transmission.

BS EN 61120-1-1993

使用6.3mm磁带的专业用数字音频磁带录音机带盘系统.一般要求

Digitales Tonbandgeraet Spulensystem mit Magnetband 6,3 mm fuer Studioanwendungen. Allgemeines Digital Audio Tape Recorder Reel to Reel System,Using 6.3 mm Magnetic Tape,for Professional Use Part 1:Gen...

适用范围：Defines the mechanical and electrical characteristics for stereophonic recorders with stationary heads to ensure the interchangeability of programme recorded signals.

实施日期：1993-01-01

DIN EN 61120-1-1994

数字录音磁带

Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional use; part 1: general requirements (IEC 61120-1:1991); German version EN 61120-1:1993

适用范围：The document defines the mechanical and electrical characteristics necesary to ensure the interchangeability of programme recorded digital audio signal on magnetic tape.

UL 6500-1999

UL Standard for Safety Audio/Video and Musical Instrument Apparatus for Household, Commercial, and Similar General Use Second Edition; Reprint with Revisions Through and Including November 09, 2012

发布日期：1999-09-30  实施日期：1999-09-30

GB 8494.4-1987

盒式磁带录音机磁头测量方法

Methods of measurement for magnetic head of cassette tape recorder

EN 61120-1-1993

Digital Audio Tape Recorder Reel to Reel System, Using 6,3 mm Magnetic Tape, for Professional Use Part 1: General Requirements (IEC 1120-1 : 1991)

DIN EN 61883-4-2006

消费音频/视频设备 数字式接口 第4部分:MPEG2-TS数据传输

Consumer audio/video equipment - Digital interface - Part 4: MPEG2-TS data transmission (IEC 61883-4:2004)

适用范围：This part of IEC 61883 describes the packetization and the transmission timing for MPEG2 transport streams for the IEEE 1394 digital interface. It describes the specifications for the IEEE 1394 packet,...

实施日期：2006-03-01

GB/T 12840-1996

盒式磁带录音机运带机构可靠性要求和试验方法

Reliability requirements and testing methods for tape transport mechanism of cassette tape recorders

适用范围：本标准规定了带宽为3.81mm的模拟盒式磁带录音机运带机构(以下简称机芯)的可靠性要求和试验方法。　　本标准适用于盒式录音机、汽车放音机和微盒式录音机机芯的可靠性鉴定试验和验收试验。　　本标准假定机芯在使用寿命阶段的...

发布日期：1996-12-20  实施日期：1997-08-01

GB/T 9384-2011

广播收音机、广播电视接收机、磁带录音机、声频功率放大器(扩音机)的环境试验要求和试验方法

Environmental testing requirements and methods for broadcasting receivers,broadcasting television receivers,tape recorders and audio amplifiers

适用范围：本标准规定了广播收音机、广播电视接收机（包括 CRT 接收机、 LCD 接收机、 PDP 接收机等）、磁带录音机等音视频录放产品、声频功率放大器（扩音机）的环境试验要求及试验方法。本标准适用于广播收音机、广播电视接收机（包括 CRT...

发布日期：2011-12-30  实施日期：2012-05-01

EN 61120-4-1992

Digital Audio Tape Recorder Reel-to-Reel System, Using 6,3 mm Magnetic Tape, for Professional Use Part 4: Magnetic Tape Properties: Definitions and Methods of Measurement (IEC 1120-4 : 1992)

DIN EN 61119-2-1994

数字盒式录音带系统(DAT).第2部分:DAT校准带

Digital audio tape cassette system (DAT) - Part 2: DAT-calibration tape (IEC 61119-2:1991); German version EN 61119-2:1994

适用范围：This document applies to calibration tapes for assessing/correcting the technical performance of equipment for the Digital Audio Tape (DAT) cassette system.

IEC 61883-2-2004

用户音频/视频设备 数字接口 第2部分:SD-DVCR数据传输

Consumer audio/video equipment - Digital interface - Part 2: SD-DVCR data transmission

适用范围：IEC 61883-2:2004 specifies the packet format and the transmission timing for SD-DVCR data. It describes the specifications for the IEEE 1394 packet, the CIP header for 525-60 and 625-50 television syst...

发布日期：2004-08-27  实施日期：2004-08-27

NF C97-145-1-1997

Multichannel digital audio tape recorder (DATR), reel-to-reel system, for professional use. Part 1 : format A.

IEC 60094-10-1988

磁带录音和重放系统 第10部分:时间码和地址码

Magnetic tape sound recording and reproducing systems. Part 10: Time and address codes

适用范围：Applies to a time code according to IEC 60461, located on a track between two audio tracks of a 6.3 mm wide professional twin track magnetic tape. Describes an address code in the form of intentional p...

发布日期：1988-04-26  实施日期：1988-04-26

GB/T 8494-1996

盒式磁带录音机磁头总技术条件

General specification for magnetic heads for cassette tape recorders

适用范围：本标准规定了盒式磁带录音机磁头的尺寸、技术要求、试验方法、检验规则和标志、标签、包装。　　本标准适用于带宽为3.81mm、带速为4.76cm/s的盒式磁带录音机的录音头、放音头、录放头和消音头。作为产品设计、生产、检验及制定产品标...

发布日期：1996-07-09  实施日期：1997-01-01

DIN EN 61119-1-1994

数字盒式录音带系统(DAT).第1部分:尺寸和性能

Digital audio tape cassette system (DAT) - Part 1: Dimensions and characteristics (IEC 61119-1:1992); German version EN 61119-1:1994

EN 61119-2-1994

Digital Audio Tape Cassette System (DAT) Part 2: DAT Calibration Tape (IEC 1119-2:1991)

DIN EN 62379-1-2008

Common control interface for networked digital audio and video products - Part 1: General

实施日期：2008-03-01

JIS S8604-1993

盒式磁带录音机

Cassette tape records

适用范围：この規格は，定格テープ速さ4.76cm/sらで再生される商業用4トラックカセットテープレフード(以下，カセットテープレコードという。)について規定する。