CNS 9581-1982

铁镍软磁性合金板及带检验法

Method of Test for Nickel Iron Soft Magnetic Alloy Sheets and Strips

发布日期：1982-11-09  实施日期：1982-11-09

BS EN 10106-2007

冷轧非颗粒结构定向最终退火状态下的电工钢片和钢带

Kaltgewalztes nicht kornorientiertes Elektroblech und-band im schlussgeglühten Zustand Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state Bandes et t?les m...

适用范围：This European Standard specifies cold-rolled non-oriented electrical steel sheet and strip in nominal thicknessesof 0,35 mm, 0,50 mm, 0,65 mm and 1,00 mm. In particular, it specifies general requiremen...

实施日期：2007-09-28

GB/T 3657-1983

软磁合金直流磁性能测量方法

Measurement method of direct magnetic properties of soft magnetic alloys

适用范围：本标准适用于在室温下测量由软磁合金（铁〜镍、铁-钴-钒、铁-铝系合金等）所制备的环形试样的基本磁化曲线和磁滞回线上的各磁性参数：磁感应强度B、磁场强度H、磁导率μ、剩余磁感应强度Br、矫顽力Hc、矩形比Br/Bm。 不大于测量误差...

发布日期：1983-05-02  实施日期：1984-03-01

NF C28-930-1983

钢铁产品 变压器磁路用切割钢板 无消耗切割

Iron and steel, magnetic steel sheet for transformer magnetic circuits. Wasteless cutting.

实施日期：1983-11-01

BS EN 60404-4-1997+A2-2008

Magnetic materials. Methods of measurement of d.c. magnetic properties of magnetically soft materials

实施日期：1997-05-15

GB/T 14986-1994

耐蚀软磁合金技术条件

实施日期：1994-05-01

GB/T 15679.3-1995

钐钴永磁合金化学分析方法 钙量的测定

Samarium cobalt permanent magnet alloy powder--Determination of calcium content

实施日期：1996-04-01

JIS C2531-1999

铁镍软质磁性材料

Nickel iron soft magnetic metallic materials

EN 60404-6-2003

Magnetic materials Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens IEC 60404-6:2003

GB/T 15679.1-1995

钐钴永磁合金粉化学分析方法

Methods for chemical analysis of samarium cobalt permanent magnet alloy powder

实施日期：1996-04-01

GB/T 15004-1994

铁铝软磁合金技术条件

实施日期：1994-05-01

ASTM A712-2007

软磁合金电阻率试验方法

Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys

实施日期：2007-12-01

NF C28-900-2007

冷轧成品状态交货的非定向晶粒磁性钢板

Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state.

BS EN 10107-2005

颗粒结构定向最终退火装态下的电工钢片和钢带

Grain-oriented electrical steel sheet and strip delivered in the fully processed state

适用范围：This European Standard specifies the steel grades of grain-oriented electrical sheet and strip in nominalthicknesses of 0,23 mm, 0,27 mm, 0,30 mm and 0,35 mm; in particular, general requirements, magne...

实施日期：2006-02-17

EN 10251-1997

Magnetic Materials. Methods of Determination of the Geometrical Characteristics of Electrical Steel Sheet and Strip

实施日期：1997-01-01

GB/T 14987-1994

高硬度高电阻高磁导合金

High permability alloys with high hardness and high electrical resistance

适用范围：本标准适用于制作录音机和磁带机磁头芯片以及微特电机、变压器、传感器、磁放大器等各种高频电感元件铁芯用的1J87、1J88、1J89、1J90和1J91软磁合金冷轧带。

发布日期：1994-04-04  实施日期：1994-05-01

NF C28-927-2006

Cold rolled electrical non-alloy or alloy steel sheet and strip delivered in the semi-processed state.

IEC 60404-4-1995

磁性材料 第4部分:磁性软材料直流磁性能的测量方法

Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of iron and steel

适用范围：Describes the terminology and two measuring methods, namely: the ring method and the permeameter method. Both methods use a test specimen in a closed magnetic circuit. Description of the test equipment...

发布日期：1995-02-15  实施日期：1995-02-15

DIN EN 10331-2003

磁性材料 烧结金属软磁材料的要求

Magnetic materials - Specification for sintered soft magnetic materials

发布日期：2003-09-01  实施日期：2003-09-01

BS EN 10265-1996

磁性材料.薄板材和带材的机械特性和磁导率的规范

Magnetische Werkstoffe. Anforderungen an Blech und Band aus Stahl mit festgelegten mechanischen un magnetischen Eigenschaften Magnetic Materials-Specification for Steel Sheet and Strip with Specified M...

适用范围：This European Standard defines the grades of steel sheet and strip with specified mechanical properties and magnetic permeability. In particular it gives the technological, mechanical and magnetic prop...

实施日期：1996-01-01