NF A95-432-1971

硬金属 饱和磁化强度的测定

Powder metallurgy. Hard metals. Determination of specific saturation magnetization.

实施日期：1971-06-01

ASTM A340-2003a

与磁性试验有关的符号和定义的标准术语

Standard Terminology of Symbols and Definitions Relating to Magnetic Testing

ISO 764-2002

钟表 防磁手表

Horology -- Magnetic resistant watches

适用范围：ISO 764 specifies the minimum requirements and test methods for magnetic resistant watches. It is based on the simulation of an accidental exposure of a watch to a direct current magnetic field of 4 80...

发布日期：2002-07-01  实施日期：2002-07-01

ASTM A889/A889M-2014

用瓦特计-无功伏安计-安培计-伏特计法和25厘米Epstein方圈测定材料低感应条件下交流磁性能的试验方法

Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame

适用范围：This test method may be used to determine the specific core loss, specific reactive power, specific exciting power, inductance permeability, and impedance permeability of flat-rolled magnetic materials...

发布日期：2014-04-01  实施日期：2014-04-01

DIN EN ISO 3882-2003

属和其它无机覆盖层 厚度测量方法评述

Metallic and other non-organic coatings - Review of methods of measurement of thickness (ISO 3882:1986); German version EN ISO 3882:1994

NF A91-112-1995

磁性基底金属上的非磁性金属镀层.镀层厚度的测量.磁性法

Non-magnetic coatings on magnetic substrates. Measurement of coating thickness. Magnetic method.

ASTM A697/A697M-2013

用伏特计-电表-瓦特计法测定叠片铁芯试样交流电磁性的试验方法

Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods

发布日期：2013-11-01  实施日期：2013-11-01

EN ISO 3326-2013

硬质合金 (磁化)矫顽(磁)力的测定

Hardmetals. Determination of (the magnetization) coercivity

实施日期：2013-07-01

ISO 3326-2013

硬质合金.矫顽磁性(磁化)的测定

Hardmetals -- Determination of (the magnetization) coercivity

适用范围：ISO 3326:2013 specifies a method of determining (the magnetization) coercivity of hardmetals containing not less than 3 % of a ferromagnetic binder by mass.

发布日期：2013-07-01  实施日期：2013-07-01

ISO 9934-2-2002

无损检测 磁粉探伤 第2部分:探伤介质

Non-destructive testing -- Magnetic particle testing -- Part 2: Detection media

适用范围：ISO 9934-2 specifies the significant properties of magnetic particle testing products (including magnetic ink, powder, carrier liquid, contrast aid paints) and the methods for checking their properties...

发布日期：2002-12-01  实施日期：2002-12-01

DIN EN ISO 9934-2-2003

无损检测 磁粉探伤 第2部分:探伤介质

Non-destructive testing - Magnetic particle testing - Part 2: Detection media

发布日期：2003-03-01  实施日期：2003-03-01

EN ISO 10893-3-2011

Non-destructive testing of steel tubes. Part 3:Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections

实施日期：2011-04-01

NF A49-785-3-2011

Non-destructive testing of steel tubes - Part 3 : automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or trans

DIN ISO 3326-1990

硬质合金.矫顽磁力(磁化)的测定

Hardmetals; determination of (the magnetization) coercivity; identical with ISO 3326:1975

适用范围：This standard specifies a method of determining (the magnetization) coercivity of hardmetals containing not less than 3 % of a ferromagnetic binder by mass.

ASTM A1013-2000(2013)e1

Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method

实施日期：2000-10-10

EN ISO 2178-1995

Non-Magnetic Coatings on Magnetic Substrates. Measurement of Coating Thickness. Magnetic Method (ISO 2178:1982)

实施日期：1995-01-01

DIN EN ISO 2178-1995

磁性基体上的非磁性涂层.涂层厚度测定.磁性方法

Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:1982); German version EN ISO 2178:1995

适用范围：The document specifies the method of using coating thickness instruments of the magnetic type for nondestructive measurements of the thickness of non-magnetic coatings (including vitreqous and procelai...

ISO 6933-1986

铁路车辆材料 磁粉验收检验

Railway rolling stock material -- Magnetic particle acceptance testing

适用范围：Specifies a method and procedure for detection of surface discontinuities. Unless otherwise agreed, ISO 6933 shall be applied when magnetic particle tests are agreed or specified for products such as a...

发布日期：1986-05-31  实施日期：1986-05-31

JIS Z2320-3-2007

Non-destructive testing -- Magnetic particle testing -- Part 3: Equipment

实施日期：2007-01-20

ISO 9934-3-2002

无损检验 磁粉探伤 第3部分:设备

Non-destructive testing -- Magnetic particle testing -- Part 3: Equipment

发布日期：2002-07-01  实施日期：2002-07-01