BS EN 840-5-2012

移动废物和回收容器 性能要求和试验方法

Mobile waste and recycling containers. Performance requirements and test methods

发布日期：2013-01-31  实施日期：2013-01-31

NF A49-901-1-2010

Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1 : quenched and tempered steel cylinders with tensile strength less than 1 100 MPa.

EN 12807-2009

LPG equipment and accessories. Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG). Design and construction

实施日期：2009-06-01

BS EN 60601-2-36-1997

医疗电气设备.体外诱导碎石设备的安全特殊要求

Medizinische elektrische Geraete. Besondere Festlegungen fuer die Sicherheit von Geraeten zur extrakorporal induzierten Lithotripsie Medical Electrical Equipment Part 2:Particular Requirements for Safe...

适用范围：Addition: This Particular Standard applies to the safety of EQUIPMENT FOR EXTRACORPOREALLY INDUCED LITHOTRIPSY as defined in 2.1.101. The applicability of this Particular Standard is limited to compone...

实施日期：1997-08-15

NF P93-511-1996

Mobile access and working towers. Rules and guidelines for the preparation of an instruction manual.

NF M88-714/IN1-2012

LPG equipment and accessories - Periodic inspection of transportable refillable LPG cylinders.

GB/T 14300-1993

可转位直沟浅孔钻

Straight flute drill with indexable inserts

实施日期：1993-12-01

NF E86-501-2-2008

Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 2 : design, fabrication, inspection and testing.

NF E86-502-3-2002

Cryogenic vessels - Large transportable vacuum insulated vessels - Part 3 : operational requirements.

BS EN 3475-702-2002

飞行器用电缆 试验方法 第702部分:屏幕后推移能力

Luft-und Raumfahrt. Elektrische Leitungen fuer Luftfahrt,Verwendung. Pruefverfahren. Zurueckschiebbarkeit des Geflechtes Cables,Electrical,Aircraft Use-Test Methods-Part 702:Screen Pushback Capability ...

适用范围：To be read in conjunction with BS EN 3475-100:2002

实施日期：2002-02-25

NF P93-510-2005

Mobile access and working towers made of prefabricated elements - Materials, dimensions, design loads, safety and performance requirements.

ISO 12100-2010

机械安全 基本概念与设计通则 技术原则

Safety of machinery -- General principles for design -- Risk assessment and risk reduction

适用范围：ISO 12100:2010 specifies basic terminology, principles and a methodology for achieving safety in the design of machinery. It specifies principles of risk assessment and risk reduction to help designers...

发布日期：2010-11-01  实施日期：2010-11-01

DIN EN 301842-3-2012

VHF air-ground Digital Link (VDL) Mode 4 radio equipment - Technical characteristics and methods of measurement for ground-based equipment - Part 3: Additional broadcast aspects (Endorsement of the English version EN 301842-3 V1.3.1 (2011-09) as German standard)

发布日期：2012-07-01  实施日期：2012-07-01

GB/T 25444.6-2010

移动式和固定式近海设施 电气装置 第6部分：安装

Mobile and fixed offshore units - Electrical installations - Part 6: Installation

适用范围：本部分适用于交流电压不大于 35 000V 和直流电压不大于 750V ，永久的、临时的、移动或手持的所有电气装置（交流和直流电压为标称电压）。 本部分不适用于舱室内的医用电气装置或液货船上的电气装置。

发布日期：2010-11-10  实施日期：2011-05-01

NF E58-040-1-2010

Mobile road construction machinery - Safety - Part 1 : common requirements.

GB 16691-2008

便携式丁烷气灶及气瓶

Portable butane cookers and gas cylinders

适用范围：本标准规定了便携式丁烷气灶 (以下简称便携灶)及便携灶用丁烷气瓶(以下简称气瓶)的要求、试验方法、检验规则、标志、包装、运输、贮存。 　　本标准适用于便携式丁烷灶及便携灶用灌装丁烷气、一次性使用的气瓶。 　　其它用途（例如...

发布日期：2008-12-29  实施日期：2009-12-01

GB 13960.6-1996

可移式电动工具的安全 带锯的专用要求

Safety of transportable motor-operated electric tools--Particular requirements for band saws

适用范围： 本标准适用于锯条长度不超过2500mm、带轮直径不大于315mm的可移式带锯。

发布日期：1996-06-17  实施日期：1997-07-01

BS EN 840-2-2004

移动式废料箱.吊耳形和/或梳形提升装置用四轮容积为500升至1200升带平盖的装料箱.尺寸和设计

Fahrbare Abfallsammelbehaelter. Behaelter mit 4 Raedern und einem Nennvolumen bis 1300 l mit Flachdeckel(n),fuer Zapfenaufnahme und/oder fuer Kammschuettungen. Masse und Formgebung Mobile waste contain...

适用范围：This European Standard specifies dimensions and design requirements of mobile waste containers with 4 wheels, with flat lid(s) and capacity up to 1300 I to be used by trunnion and/or comb lifting devic...

实施日期：2004-03-18

NF M88-713-2008

LPG equipment and accessories - Procedure for checking LPG cylinders before, during and after filling.

NF A49-901-2-2010

Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 2 : quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa.