NF P21-600-2009

Structural timber - Structural timber preservative treated against biological attack.

BS EN ISO 14577-1-2002

金属材料 硬度和材料参数的仪器化缩进试验 第1部分:试验方法

Metallic materials Instrumented indentation test for hardness and materials parameters Part 1:Test method

适用范围：ISO 14577-1 specifies the method of instrumented indentation test for the determination of hardness and other materials parameters for the three ranges:macro (test force between 2 N and 30 kN);micro (t...

实施日期：2002-11-22

EN 12490-2010

Durability of wood and wood-based products. Preservative-treated solid wood. Determination of the penetration and retention of creosote in treated wood

实施日期：2010-06-01

EN ISO 7721-2-1994

Countersunk Flat Head Screws. Part 2:Penetration Depth of Cross Recesses;(ISO 7721-2)

实施日期：1994-01-01

EN 12390-8-2009

Testing hardened concrete. Part 8:Depth of penetration of water under pressure

实施日期：2009-02-01

ISO 13433-2006

土工合成材料 动态穿孔试验（落锥试验）

Geosynthetics -- Dynamic perforation test (cone drop test)

适用范围：ISO 13433:2006 specifies a method to determine the resistance of geosynthetics to penetration by a steel cone dropped from a fixed height. The degree of penetration is an indication of the behaviour of...

发布日期：2006-08-01  实施日期：2006-08-01

DIN EN ISO 14577-1-2003

金属材料 压痕硬度试验和材料参数 第1部分:试验方法

Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method

适用范围：This standard specifies the method of instrumented indentation test for determination of hardness and other material parameters.

DIN EN 12503-4-2013

Sports mats - Part 4: Determination of shock absorption; German version EN 12503-4:2013

发布日期：2013-11-01  实施日期：2013-11-01

ISO 6508-3-2005

金属材料 洛氏硬度试验 第3部分:标准硬度块的校准(A,B,C,D,E,F,G,H,K,N,T标尺)

Metallic materials -- Rockwell hardness test -- Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)

适用范围：ISO 6508-3:2005 specifies a method for the calibration of reference blocks to be used for the indirect verification of Rockwell hardness testing machines (scales A, B, C, D, E, F, G, H, K, N, T), as sp...

发布日期：2005-12-01  实施日期：2005-12-01

BS EN ISO 14577-2-2002

金属材料 硬度和材料参数的仪器化缩进试验 第2部分:试验机的验证和校准

Metallic materials Instrumented indentation test for hardness and materials parameters Part 2:Verification and calibration of testing machines

适用范围：ISO 14577-2 specifies the method of verification and calibration of testing machines for carrying out the instrumented test in accordance with ISO 14577-1.It describes a direct verification method for ...

实施日期：2002-11-22

DIN EN 13880-3-2003

可热处理的密封剂 第3部分:测定球压和弹跳性能的试验方法

Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience)

适用范围：This European Standard describes a method for determining of the penetration and recovery (resilience) of hot applied joint sealants using a standard penetrometer fitted with a ball penetration tool.

ISO 22476-12-2009

岩土工程勘察和试验 现场试验 第12部分:机械触探试验(CPTM)

Geotechnical investigation and testing -- Field testing -- Part 12: Mechanical cone penetration test (CPTM)

适用范围：ISO 22476-12:2009 specifies a mechanical cone penetration test (CPTM), including equipment requirements, execution and reporting. The results from such geotechnical testing are especially suited to the...

发布日期：2009-05-01  实施日期：2009-05-01

DIN EN ISO 4545-4-2006

金属材料 努氏硬度试验 第4部分:硬度数值表

Metallic materials - Knoop hardness test - Part 4: Table of hardness values

适用范围：This part of ISO 4545 gives a table for the calculation of Knoop hardness values for use in tests made on flatsurfaces carried out in accordance with ISO 4545-1.

实施日期：2006-03-01

ISO 14577-3-2002

金属材料 硬度和材料参数的仪器压痕试验 第3部分:基准块的校准

Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 3: Calibration of reference blocks

适用范围：ISO 14577-3 specifies a method for the calibration of reference blocks to be used for the indirect verification of testing machines for the instrumented indentation test, as specified in ISO 14577-2.

发布日期：2002-10-01  实施日期：2002-10-01

NF P98-818-20-2012

Bituminous mixtures - Test methods for hot mix asphalt - Part 20 : indentation using cube or Marshall specimens (CY).

ISO 22476-7-2012

Geotechnical investigation and testing -- Field testing -- Part 7: Borehole jack test

发布日期：2012-12-01  实施日期：2012-12-01

DIN EN 61391-2-2010

超声学 脉冲回声扫描仪 第2部分:穿透最大深度和局部动态范围的测量

Ultrasonics - Pulse-echo scanners - Part 2: Measurement of maximum depth of penetration and local dynamic range (IEC 61391-2:2010)

实施日期：2010-09-01

EN 13880-2-2003

Hot applied joint sealants Part 2:Test method for the determination of cone penetration at 25 °C

实施日期：2003-08-29

EN ISO 14577-4-2007

Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 4:Test method for metallic and non-metallic coatings

实施日期：2007-05-01

IEC 61391-2-2010

超声学 脉冲回声扫描仪 第2部分:穿透最大深度和局部动态范围的测量

Ultrasonics - Pulse-echo scanners - Part 2: Measurement of maximum depth of penetration and local dynamic range

适用范围：IEC 61391-2:2010 defines terms and specifies methods for measuring the maximum depth of penetration and the local dynamic range of real time ultrasound B MODE scanners. The types of transducers used wi...

发布日期：2010-01-14  实施日期：2010-01-14