DIN 15062-2-1982

起重机 绳轮 轴承和轮毂的尺寸

Cranes; rope pulleys; dimensions of hubs and bearings

适用范围：Cranes; sheaves for wire ropes; dimensions for hubs and bearingsGrues; poulies à c?ble; dimensions pour moyeux et placements des paliers

BS 3799-1974

石油工业用钢管配件、螺旋管接头和套管焊接规范

Stahlrohrfittings,geschraubt und stumpfgeschweisst,fuer die Oelindustrie. Spezifikation Specification for Steel Pipe Fittings,Screwed and Socket-Welding for the petroleum industry Raccords de tuyaux d'...

适用范围：Forged carbon and alloy steel screwed and socket-welding fittings. Screw threads in accordance with API Std. 5B. Bore diameters of socket-welding fittings compatible with BS 3600 and BS 1600. Substanti...

实施日期：1974-08-30

NF Z64-610-1975

装１１个磁带盘的可互换的磁带盒 机械特性和磁特性

Interchangeable magnetic eleven-disk pack, physical and magnetic characteristics.

BS 7161-1990

内装发动机的船舶用螺旋浆轴端和螺旋桨毂规范

Specification for propeller shaft ends and bosses for inboard-engined pleasure craft

适用范围：Dimensions for interchangeability of propellor bosses and propellor shaft ends in the shaft diameter range of 20 to 160 mm with a taper of 1:10.

DIN ISO 6698-1989

自行车 自行车装配式活动轮毂用的螺纹

Cycles; screw threads used to assemble freewheels on bicycles hubs; identical with ISO 6698:1981

适用范围：This standard specifies the thread profile and limits and tolerances for the screw thread used to assemble free wheels on bicycle hubs.

EN ISO 4566-1995

Small Craft with Inboard Engine. Propeller Shaft Ends and Bosses with 1 :10 Taper (ISO 4566 :1992)

实施日期：1995-01-01

GB 11699-1989

小艇 舷内机桨轴端和桨毂

Small craft--Inboard engine-propeller shaft ends and bosses

DIN 32711-2-2009

Shaft to collar connection - Polygon profile P3G - Part 2: Calculation and dimensioning

实施日期：2009-03-01

DIN EN ISO 4566-1995

造船.装有发动机的游艇.螺旋桨轴端和桨彀

Small craft with inboard engine - Propeller shaft ends and bosses with 1:10 taper (ISO 4566:1992); German version EN ISO 4566:1995

适用范围：The document specifies the dimension for interchangeability of propeller bosses and propeller shaft ends in the shaft diameter range of 20 mm to 160 mm with a taper of 1 : 10, intended for installation...

DIN 950-2000

偏置轮辐型手轮.圆形或方形壳孔

Handwheels, dished - Hub hole round or straight square

适用范围：Hand wheels specified in this standard are mostly used on machines and equipment.

DIN 6892-2012

Drive type fastenings without taper action. Parallel keys. Calculation and design

实施日期：2012-08-01

BS 2456-1990

冷水用浮子操作阀浮子(塑料制品)规范

Floats (Plastics) for Float Operated Valves for Cold Water Services

适用范围：Requirements for two grades of plastic floats specified in BS 1212.

实施日期：1990-11-30

DIN 32711-1-2009

Shaft to collar connection - Polygon profil P3G - Part 1: Generalities and geometry

实施日期：2009-03-01

BS ISO 6519-2004

柴油机.喷油泵.轴端和毂盘的锥度

Dieselmotoren. Einspritzpumpen. Kegelige Wellenenden und Naben Diesel engines Fuel injection pumps Tapers for shaft ends and hubs Moteurs diesels. Pompes d'injection de combustible. Cones pour bouts d'...

适用范围：This International Standard specifies the dimensions, necessary for interchangeability, of tapers for the shaft ends and hubs of fuel injection pumps on diesel (compression-ignition) engines. The shaft...

实施日期：2004-12-01

ISO 8845-1994

舱内机小艇--带1:16锥度的螺旋桨轴端和轴毂

Small craft with inboard engine -- Propeller shaft ends and bosses with 1:16 taper

适用范围：Specifies the dimensions for interchangeability of propeller bosses and propeller shaft ends in the shaft diameter range of 20 mm to 160 mm with a taper of 1:16, intended for installation in inboard-en...

发布日期：1994-12-01  实施日期：1994-12-01

BS EN ISO 4566-1995

舱内安装发动机的小型船舶.锥度为1:10螺旋浆轴端和尾轴毂

Kleine Wasserfahrzeuge mit Innenbordmotoren. Propellerwellenenden und Propellernaben mit Kegel 1:10 Small Craft with Inboard Engine-Propeller Shaft Ends and Bosses with 1:10 Taper (Q) Navires de plaisa...

适用范围：This International Standard specifies the dimensions for interchangeabiliy of propeller bosses (hubs) and propeller shaft ends in the shaft diameter range of 20 mm to 160 mm with a taper of 1:10<up1)>,...

实施日期：1995-01-01

DIN 15074-1978

起重机 有轮缘和滑动轴承、无齿环的轨道轮

Cranes; flanged crane rail wheels with plain bearings, without gear wheel

适用范围：Cranes, flanged crane rail wheels with plain bearings, without gear wheel Appareils de levage, roues porteuses à boudens avec glissières, sans jante dentée

DIN 3670-2000

轻金属制盘形手轮

Hand wheels, disk type

适用范围：The requirements specifies in this standard apply to disc type hand wheels to be mostly on machines and equipment.

BS 746-2005+A1-2009

Specification for gas meter unions and adaptors

实施日期：2005-05-24

BS 1968-1953

球阀用浮球(铜)规范

Schwimmer fuer Kugelventile (Kupfer). Spezifikation Floats for Ballvalves (Copper) Flotteurs pour soupapes a boule (cuivre). Specification Amd 2;

适用范围：Class A. Soldered joints; Class B. Solderless joints; Class C. Brazed, welded or silver soldered joints. Manufacture, methods of jointing, dimensions for bosses; tests, marking requirements, dimensions...

实施日期：1953-01-01