JB/T 10380-2013

圆管带式输送机

Pipe belt conveyor

适用范围：本标准规定了圆管带式输送机的型式、基本参数、技术要求、试验方法、检验规则、标志、包装和贮存。本标准适用于由六个或八个托辊组成正多边形以强制输送带形成圆管状，连续输送各种块状、粒状等松散物料的输送机。

发布日期：2013-12-31  实施日期：2014-07-01

DIN EN 14457-2004

下水管道无沟结构用部件的一般要求

General requirements for components specifically designed for use in trenchless construction of drains and sewers

DIN 18251-2-2002

锁具 暗锁 第1部分:管框门用暗锁

Locks - Mortise locks - Part 2: Mortise locks for rube frame doors

适用范围：This standard defines definitions, measurements, requirements, tests and marking for mortice locks with latch and/or lock including mortice locks with selflocking device, which are suitable for tube fr...

EN 61048-2006

Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements IEC 61048:2006

IEC 60081-1997

双端荧光灯 性能规范

Double-capped fluorescent lamps - Performance specifications

适用范围：Gives technical requirements for tubular fluorescent lamps with preheated cathodes for general lighting service, operated with or without a starter from a.c. mains, also describes tests for the lamps w...

发布日期：1997-12-15  实施日期：1997-12-15

EN ISO 8362-4-2004

Injection containers and accessories. Part 4:Injection vials made of moulded glass ISO 8362-4:2003;Supersedes EN 28362-4:1993

实施日期：2004-06-01

DIN EN 12732-2013

Gas infrastructure –Welding steel pipework –Functional requirements

发布日期：2013-07-01  实施日期：2013-07-01

NF C72-101-3/A2-2008

Incandescent lamps - Safety specifications - Part 3 : tungsten-halogen lamps (non-vehicle).

JB/T 7941.4-1995

管状油标

Tube type oil level indicators

适用范围：本标准规定了管状油标的型式与尺寸。本标准适用于窥视各种机械设备上润滑油油位面的油标。

实施日期：1996-04-14

BS EN 60127-5-1991

小型熔断器.小型熔丝链质量评定指南

Geraeteschutzsicherungen. Leitlinien fuer die Guetebestaetigung von G-Sicherungseinsaetzen Miniature Fuses Part 5:Guide for the Quality Assessment of Miniature Fuse-Links Coupe-circuit minatures. Direc...

适用范围：Guidelines and limits for quality control purposes for users and manufacturers.

实施日期：1991-01-01

BS AU 16A-1989

Elektrokabelstecker (hoechstzulaessiger Dauerstrom 17,5 A). Spezifikation Electrical Cable Connectors (17.5 A Maximum Continuous Rating) Connecteurs de ca^bles électriques (intensit continue maximale 17,5 A)-spécification

实施日期：1989-01-01

DIN EN 61048-2007

Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements (IEC 61048:2006)

实施日期：2007-02-01

IEC 60598-2-3 AMD 1-2011

修改件1 灯具 第2-3部分:详细要求 道路和街道照明用灯具

AMENDMENT 1 Luminaires. Part 2-3:Particular requirements. Luminaires for road and street lighting AMENDEMENT 1 Luminaires. Partie 2-3:Règles particulières. Luminaires d'éclairage public Edition 3.0

实施日期：2011-04-01

IEC 60927-2007

灯用附件 启动装置(辉光启动器除外) 性能要求

Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements

适用范围：This International Standard specifies performance requirements for starting devices (starters and ignitors) for tubular fluorescent and other discharge lamps for use on a.c. supplies up to 1 000 V at 5...

发布日期：2007-06-14  实施日期：2007-06-14

IEC 62386-206-2009

数字可寻址照明接口 第206部分:控制装置的特殊要求 从数字信号到直流电压的转换(5型器件)

Digital addressable lighting interface - Part 206: Particular requirements for control gear - Conversion from digital signal into d.c. voltage (device type 5)

适用范围：IEC 62386-206:2009 specifies a protocol and test methods for the control by digital signals of electronic control gear, associated with the conversion from digital signal into d.c. voltage. This Part 2...

发布日期：2009-06-10  实施日期：2009-06-10

CNCA 01C-009-2011

电气电子产品类强制性认证实施规则 电路开关及保护或连接用电器装置 小型熔断器的管状熔断体

发布日期：2011-05-10  实施日期：2011-08-01

BS 6091-1-1981

电工用硬化纸板.第1部分:一般要求规范

Vulkanfiber fuer elektrische Zwecke. Spezifikation fuer allgemeine Anforderungen Vulcanized Fibre for Electrical Purposes Part 1:Specification of General Requirements Fibres vulcanisees. usages electri...

适用范围：Definitions and general requirements for vulcanized fibre sheets , flat or corrugated, round rods and round tubes for use as electrical insulation. Material made by combining with an adhesive several t...

实施日期：1981-01-01

BS 7910-2013

金属结构裂纹验收评定方法指南

Guide to methods for assessing the acceptability of flaws in metallic structures

发布日期：2013-12-31  实施日期：2013-12-31

NF C72-210/A2-2003

Double-capped fluorescent lamps - Performance specifications.

GB 1312-1991

管形荧光灯座和启动器座技术条件

Technical requiremnts of lampholders for tubular fluorescent lamps and starterholders

实施日期：1992-08-01