ASTM C654M-2005a

多孔混凝土管规格(米制)

Standard Specification for Porous Concrete Pipe (Metric)

适用范围：<p>1.1 This specification covers porous nonreinforced concrete pipe for use in underdrains.</p><p>1.2 This specification is the metric counterpart of Specification C 654.</p>

ISO 10644-2009

螺钉和钢制平垫圈组合件 垫圈硬度等级200HV和300HV

Screw and washer assemblies made of steel with plain washers -- Washer hardness classes 200 HV and 300 HV

适用范围：ISO 10644:2009 specifies the requirements for metric screw and plain washer assemblies made of steel with coarse thread M2 to M12 inclusive, flat seating heads, property classes up to and including 10....

发布日期：2009-07-01  实施日期：2009-07-01

DIN ISO 15552-2005

气压传动 具有可卸架的缸筒,1000 kPa(10 bar)系列 孔32 mm - 320 mm, 基本尺寸、安装尺寸和附件尺寸

Pneumatic fluid power - Cylinders with detachable mountings, 1000 kPa (10 bar) series, bores from 32 mm to 320 mm - Basic, mounting and accessories dimensions

适用范围：This International Standard specifies a method for the quantitative determination of the mineral oil(hydrocarbon) content in field-moist soil samples by gas chromatography.The method is applicable to m...

实施日期：2010-05-01

BS EN ISO 10512-2012

带公制细牙螺纹的六角锁紧规则螺母(带非金属嵌件) 属性类别6、8及10

Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread. Property classes 6,8 and 10

发布日期：2013-01-31  实施日期：2013-01-31

ASME SI-1-1982

SI国际单位（米制）的使用指南和介绍

Orientation and Guide for Use of SI (Metric) Units

适用范围：This booklet includes: SI Base and Supplementary Units, Rules For Use Of SI Units In ASME Publications, Conversion and Rounding, Dimensioning, Units Outside The International System, Units Not To Be Us...

实施日期：1982-01-01

DIN 513-3-1985

米制锯齿螺纹; 偏差和公差

Metric buttress threads; deviations and tolerances

ISO 8673-2012

Hexagon regular nuts (style 1) with metric fine pitch thread -- Product grades A and B

发布日期：2012-12-01  实施日期：2012-12-01

ASME B18.2.3.1M-1999

Metric Hex Cap Screws

实施日期：1999-12-31

DIN EN ISO 4762-2004

内六角圆柱头螺钉

Hexagon socket head cap screws

发布日期：2004-06-01  实施日期：2004-06-01

DIN EN ISO 4036-2001

六角薄螺母.产品等级B

Hexagon thin nuts (unchamfered) - Product grade B (ISO 4036:1999); German version EN ISO 4036:2000

适用范围：The document contains dimensional and technical requirements of hexagon thin nuts (chamfered); product grade B and specifies their designation.

NF L21-278-2006

Aerospace series - Lockbolts, 100 o countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification : 1 100 Mpa (at ambient temperature) / 315 oC.

ASTM B234M-2004

冷凝器和热交换器用拉制无缝铝和铝合金管规格(米制)

Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers (Metric)

适用范围：<p>1.1 This specification covers aluminum-alloy (Note 0) drawn seamless round tube in straight lengths designated as shown in the , for use in surface condensers, evaporators, and heat exchangers. Note...

实施日期：2004-12-01

BS ISO 14275-2002

航空航天 内弯管十字头棱纹驱动器 米制系列

Luft-und Raumfahrt. Gerippte Fluegelkreuzschlitze. Metrische Reihe Aerospace-Drives,Internal,Offset Cruciform,Ribbed-Metric Series Aeronautique et espace. Empreintes cruciformes deportees,avec saillies...

适用范围：This International Standard specifies the dimensions of metric internal, offset cruciform, ribbed drives used in metric screws in the nominal thread diameter range of 3 mm to 20 mm. Drivers and gauges ...

实施日期：2002-07-29

ISO 14276-2002

航空和航天.内十字旋紧固件.米制系列

Aerospace -- Drives, internal, offset cruciform -- Metric series

适用范围：ISO 14276 specifies the dimensions of metric internal, offset cruciform drives used in metric screws in the nominal thread diameter range of 1,6 mm to 20 mm.

发布日期：2002-06-01  实施日期：2002-06-01

DIN 2283-1-2001

几何产品规范(GPS).“止”端螺纹量规.第1部分:公称直径1mm至40mm的ISO米制螺纹的工作量规、检验和调整量规

NOT GO workshop screw plug gauges, check plugs and setting plugs for ISO metric screw threads from 1 mm up to 40 mm nominal diameter

DIN 13-8-1999

ISO米制螺纹;螺距3mm；螺纹直径28～300mm的细牙螺纹.尺寸

ISO general purpose metric screw threads - Part 8: Nominal sizes for 3 mm fine pitch threads; nominal diameter from 28 mm to 300 mm

适用范围：The document specifies nominal sizes.

BS EN 4401-2006

Luft-und Raumfahrt. Passniete,mit Universalkopf,Schertyp,aus Titanlegierung TI-P64001,mit Aluminium pigmentierter Beschichtung,metrische Reihe. Klasse:1100 MPa (bei Raumtemperatur) / 315°C Lockbolts,protruding head,sheartype,close tolerance,in titanium alloy TI-P64001,with aluminium pigmented coating,metric series. Classification:1 100 MPa (at ambient temperature) / 315 °C Serie aerospatiale. Rivets a bague sertie,a tete cylindrique,a cisaillement,a tolerance serree,en alliage de titane TI-P6400

实施日期：2006-05-31

DIN 76-1-2004

螺纹退刀槽 第1部分:按DIN 13-1的ISO 米制螺纹

Thread run-outs and thread undercuts - Part 1: For ISO metric threads in accordance with DIN 13-1

适用范围：This standard specifies thread run-outs and thread undercuts for screws and similar parts and for parts with internal thread with ISO metric threads in accordance with DIN 13-1 und DIN ISO 261 and the ...

BS EN 3788-2001

管联接器8°30' 防护管帽

Luft-und Raumfahrt. Rohrverschraubung 8 0'. Schutzkappen Pipe Coupling 8 Degrees 30'-Protective Caps Serie aerospatiale. Systeme de raccordement 8 0'. Capuchons de protection

适用范围：This standard specifies the characteristics for protective caps for pipe couplings 8°30′, used to protect metric pipe ends during transportation and storage, for aerospace applications. The caps shall ...

实施日期：2001-11-12

EN 4175-2005

Aerospace series. Collars,flanged swage locking,sheartype,in titanium TI-P99002,metric series

实施日期：2005-11-01